add a directory for para-driver support in unmodified linux.
PATCH 1/1 add a directory for para-driver support in unmodified linux.
This patch adds a directory for para-driver support in unmodified linux.
The event channel is made to a pci device, the event is delivered by this device.
The build script will create the symbol link to linux-sparse tree for all the front end driver. A prinstine kernel path shall be given in compile.sh.
Signed-off-by Xiaofeng Ling <[email protected]>
Signed-off-by Arun Sharma <[email protected]>
unmodified-sparse/Makefile | 33 ++++ unmodified-sparse/README | 12 + unmodified-sparse/balloon/Makefile | 2 unmodified-sparse/blkfront/Makefile | 8 + unmodified-sparse/compile.sh | 2 unmodified-sparse/evtchn-pci/Makefile | 10 + unmodified-sparse/evtchn-pci/debuginfo.h | 56 +++++++ unmodified-sparse/evtchn-pci/evtchn-pci.c | 330 +++++++++++++++++++++++++++++++++++++++++++++++ unmodified-sparse/evtchn-pci/evtchn-pci.h | 91 ++++++++++++ unmodified-sparse/evtchn-pci/evtchn.c | 119 ++++++++++++++++ unmodified-sparse/evtchn-pci/xen-support.c | 79 +++++++++++ unmodified-sparse/include/asm/smp_alt.h | 6 unmodified-sparse/mkbuildtree | 19 ++ unmodified-sparse/netfront/Makefile | 8 + unmodified-sparse/xenbus/Makefile | 12 + 15 files changed, 787 insertions(+)
unmodified-sparse/Makefile new file +33 -0
@@ -0,0 +1,33 @@ +CONFIG_XEN_EVTCHN_PCI = m +CONFIG_XEN_BLKDEV_FRONTEND = m +CONFIG_XEN_NETDEV_FRONTEND = m + +obj-$(CONFIG_XEN_EVTCHN_PCI) += evtchn-pci/ +obj-$(CONFIG_XEN_BLKDEV_FRONTEND) += blkfront/ +obj-$(CONFIG_XEN_NETDEV_FRONTEND) += netfront/ +obj-m += xenbus/ + +CFLAGS += -I$(M)/include -I$(M)/evtchn-pci + +NOSTDINC_FLAGS = -nostdinc -iwithprefix include/asm-xen -Iinclude/asm-xen -iwithprefix include + +CFLAGS += -DCONFIG_VMX -DCONFIG_VMX_GUEST + +CFLAGS += -DCONFIG_XEN_SHADOW_MODE -DCONFIG_XEN_SHADOW_TRANSLATE + +CFLAGS += -DCONFIG_XEN_BLKDEV_GRANT -DXEN_EVTCHN_MASK_OPS + +CFLAGS += -DCONFIG_XEN_NETDEV_GRANT_RX -DCONFIG_XEN_NETDEV_GRANT_TX + +debug: + echo $(XEN_DRIVERS_ROOT) + echo $(CFLAGS) + ./compile.sh + +clean: + find . -name "*.o" |xargs rm -f + find . -name "*.ko" |xargs rm -f + find . -name "*.mod.c" |xargs rm -f + find . -name ".*.cmd" |xargs rm -f + rm .tmp_versions -rf +
unmodified-sparse/README new file +12 -0
@@ -0,0 +1,12 @@ +to build xen front driver as modules to unmodified linux kernel +modify the compile.sh to point to the correct kernel source. +eg: +make -C /usr/src/linux-2.6.12 M=$PWD V=1 $* +then run ./compile.sh + +There will three modules: xen-evtchn-pci.ko xen-vbd.ko xen-vnif.ko +xen-evtchn-pci.ko is the base module, and xen-vbd.ko is for VBD, xen-vnif.ko +is for VNIF. + +In the configure file, the vbd configration is same as xen-linux. + XF
unmodified-sparse/balloon/Makefile new file +2 -0
@@ -0,0 +1,2 @@ + +obj-m += balloon.o
unmodified-sparse/blkfront/Makefile new file +8 -0
@@ -0,0 +1,8 @@ + +obj-m += xen-vbd.o + +NOSTDINC_FLAGS = -nostdinc -iwithprefix include/asm-xen -Iinclude/asm-xen -iwithprefix include +NOSTDINC_FLAGS += -I$(M)/include/asm-xen + +xen-vbd-objs := blkfront.o vbd.o +
unmodified-sparse/compile.sh new file +2 -0
@@ -0,0 +1,2 @@ +./mkbuildtree +make -C `pwd`../pristine-linux-2.6.12 M=$PWD V=1 $*
unmodified-sparse/evtchn-pci/Makefile new file +10 -0
@@ -0,0 +1,10 @@ + +EVTCHN=xen-evtchn-pci + +obj-m += $(EVTCHN).o + +NOSTDINC_FLAGS = -nostdinc -iwithprefix include/asm-xen -Iinclude/asm-xen -iwithprefix include +NOSTDINC_FLAGS += -I$(M)/include/asm-xen + +$(EVTCHN)-objs := evtchn.o ctrl_if.o evtchn-pci.o gnttab.o xen_proc.o xen-support.o +
unmodified-sparse/evtchn-pci/debuginfo.h new file +56 -0
56 lines not on this page · raw message
unmodified-sparse/evtchn-pci/evtchn-pci.c new file +330 -0
330 lines not on this page · raw message
unmodified-sparse/evtchn-pci/evtchn-pci.h new file +91 -0
91 lines not on this page · raw message
unmodified-sparse/evtchn-pci/evtchn.c new file +119 -0
119 lines not on this page · raw message
unmodified-sparse/evtchn-pci/xen-support.c new file +79 -0
79 lines not on this page · raw message
unmodified-sparse/include/asm/smp_alt.h new file +6 -0
@@ -0,0 +1,6 @@ +#ifdef CONFIG_SMP +#define LOCK "lock ; " +#else +#define LOCK "" +#endif +
unmodified-sparse/mkbuildtree new file +19 -0
@@ -0,0 +1,19 @@ +C=$PWD +[ -d include ] || mkdir include +[ -d include/asm-xen ] || mkdir include/asm-xen +[ -d include/asm-xen/xen-public ] || mkdir include/asm-xen/xen-public +lndir -silent ../../../linux-2.6-xen-sparse/include/asm-xen/ include/asm-xen/ +(cd include/asm-xen;ln -sf asm-`uname -i` asm) +lndir -silent ../../../../xen/include/public include/asm-xen/xen-public + +for d in $(find $C/../linux-2.6-xen-sparse/drivers/xen/ -type d -maxdepth 1 | sed -e 1d); do + if ! echo $d | egrep -q back; then + lndir $d $(basename $d) > /dev/null 2>&1 + fi +done + +ln -sf $C/../tools/xenstore/xenstored.h xenbus/xenstored.h +ln -sf $C/../linux-2.6-xen-sparse/arch/xen/kernel/ctrl_if.c evtchn-pci +ln -sf $C/../linux-2.6-xen-sparse/arch/xen/kernel/gnttab.c evtchn-pci +ln -sf $C/../linux-2.6-xen-sparse/arch/xen/kernel/xen_proc.c evtchn-pci +
unmodified-sparse/netfront/Makefile new file +8 -0
@@ -0,0 +1,8 @@ +CONFIG_XEN_NETDEV_FRONTEND = m + +obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-vnif.o + +NOSTDINC_FLAGS += -I$(M)/include/asm-xen + +xen-vnif-objs := netfront.o +
unmodified-sparse/xenbus/Makefile new file +12 -0
@@ -0,0 +1,12 @@ +obj-m += xenbus.o + +NOSTDINC_FLAGS += -I$(M)/include/asm-xen + +xenbus-objs = +xenbus-objs += xenbus_comms.o +xenbus-objs += xenbus_xs.o +xenbus-objs += xenbus_probe.o + +XEN_TOOLS_DIR := "../tools" +vpath %.h $(XEN_TOOLS_DIR) +EXTRA_CFLAGS += -I $(XEN_TOOLS_DIR)
_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xensource.com/xen-devel