Skip to contentSkip to conversation

DM6467 U-boot Nand flash question

U-Boot Neeraj Tandon 1 participant 1 message Apr 3, 2009

lore
Share & tools
lore
#0 lore raw

Hi All,

Hi,

Sorry I hit the send before typing subject of previous mail. Repeating the contents in this mail:

I am using u-boot version 2009.3-rc1 for TI Davinci t467 EVM. I built the u-boot.bin for NAND flash. My only mdoification was in file include/configs/davinci_devevm.h where I #define CONFIG_SYS_USE_NAND

I built this and flashed this using TI provide sfh_DM6467.exe. The flashng goes well and I see blocks 6 and 7 being written. However on power on of EVM I see following:

Chip initialization passed!
TI UBL Version: 1.30
Booting Catalog Boot Loader
BootMode = NAND
Starting NAND Copy...
Valid MagicNum found.
DONE
Jumping to entry point at 0x81080000

This keeps repeating and EVM it is unable to boot.

Any one used this version of u-boot with a NAND flash and TI DVEVM. Any suggestion on changes I should make to isolate this error ?

Thanks,
Neeraj