Skip to contentSkip to conversation

metadata format processing

linux-lvm Dieter Stüken 1 participant 1 message Sep 12, 2005

lore
Share & tools
lore
#0 lore raw

I want to develop a tool to get a graphical representation of my LVM configuration. I thought about parsing the output of lvm commands, or even using the C-API directly. Unfortunately I did not found a way to enforce read only access when using the API. All user space tools have to run as root and may modify/destroy my LVM. So I think they are a bad choice to build any CGI-scripts upon. Finally I discovered the external metadata format, which describes any aspects of my LVM in detail. After I even found a parser for this syntax within the LVM libs, I was able to convert the metadata into XML. Once having XML it should be possible to transfer any informations towards HTML or SVG.

My very first try looks like this:

<?xml version="1.0" encoding="ISO-8859-1"?>
<lvm>
<contents>Text Format Volume Group</contents>
<version>1</version>
<description>Created *after* executing &apos;lvextend /dev/raster/eglv -l 7452 /dev/sdg1&apos;</description> <creation_host>linux2</creation_host>
<creation_time>1124130973</creation_time>
<group name="raster">

    <id>6FmvZu-mLHD-AIQV-jnFu-hMUN-oTwe-X2zCRm</id>
    <seqno>54</seqno>
    <status>RESIZEABLE</status>
    <status>READ</status>
    <status>WRITE</status>
    <extent_size>65536</extent_size>
    <max_lv>255</max_lv>
    <max_pv>255</max_pv>
    <group name="physical_volumes">
      <group name="pv0">
        <id>ruo3gO-jHR7-QV3Z-rUa4-jYnF-GyAn-uUR3vA</id>
        <device>/dev/sde1</device>
        <status>ALLOCATABLE</status>
        <pe_start>384</pe_start>
        <pe_count>7452</pe_count>
      </group>
      <group name="pv1">
        <id>ARjpMz-A6iP-8x3t-7aCg-CCSH-kZpo-vt1KPD</id>
        <device>/dev/sdd1</device>
        <status>ALLOCATABLE</status>
        <pe_start>384</pe_start>
        <pe_count>7452</pe_count>
      </group>
    </group>
    <group name="logical_volumes">
      <group name="eglv">
        <id>ylp7ol-r6wT-e2Py-4KZ9-cgjU-6fU0-luciPx</id>
        <status>READ</status>
        <status>WRITE</status>
        <status>VISIBLE</status>
        <segment_count>1</segment_count>
        <group name="segment1">
          <start_extent>0</start_extent>
          <extent_count>7452</extent_count>
          <type>striped</type>
          <stripe_count>1</stripe_count>
          <stripes>pv0</stripes>
          <stripes>0</stripes>
        </group>
      </group>
    </group>

</group>
</lvm>

I manually shortened it, just as an example...

I used the parser to get it into a "struct config_tree" and developed some procedure to dump it out as XML. There are some aspects that can be discussed (why are all nesting elements simply called <group> whereas arrays are not grouped ...)

I'm just about to learn XSLT to get this processed further.

Is some one interested to participate?

Dieter.

Signature · 4 lines
Dieter St�ken, con terra GmbH, M�nster
    [email protected]
    http://www.conterra.de/
    (0)251-7474-501