Skip to contentSkip to conversation

ppc32: Add ppc_sys descriptions for PowerQUICC I devices

PATCH New Vitaly Bordug 1 participant 1 message Sep 16, 2005

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ppc32: Add ppc_sys descriptions for PowerQUICC I devices

Added ppc_sys device and system definitions for PowerQUICC I devices.
This will allow drivers for PQI to be proper platform device drivers. Currently sys section contains only MPC885 and MPC866. Identification should be done with identify_ppc_sys_by_name call, with board-specific "name" string passed, since PQI do not have any register that could identify the SOC.

arch/ppc/syslib/Makefile +2 -1
@@ -34,7 +34,8 @@ ifeq ($(CONFIG_40x),y)
 obj-$(CONFIG_PCI)		+= indirect_pci.o pci_auto.o ppc405_pci.o
 endif
 endif
-obj-$(CONFIG_8xx)		+= m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y)
+obj-$(CONFIG_8xx)		+= m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \
+				   ppc_sys.o mpc8xx_devices.o mpc8xx_sys.o
 ifeq ($(CONFIG_8xx),y)
 obj-$(CONFIG_PCI)		+= qspan_pci.o i8259.o
 endif
arch/ppc/syslib/mpc8xx_devices.c new file +224 -0

224 lines not on this page · raw message

arch/ppc/syslib/mpc8xx_sys.c new file +61 -0

61 lines not on this page · raw message

include/asm-ppc/irq.h +10 -0
@@ -138,6 +138,16 @@ irq_canonicalize(int irq)
 #define	SIU_IRQ7	(14)
 #define	SIU_LEVEL7	(15)
 
+#define MPC8xx_INT_FEC1		SIU_LEVEL1
+#define MPC8xx_INT_FEC2		SIU_LEVEL3
+
+#define MPC8xx_INT_SCC1		(CPM_IRQ_OFFSET + CPMVEC_SCC1)
+#define MPC8xx_INT_SCC2		(CPM_IRQ_OFFSET + CPMVEC_SCC2)
+#define MPC8xx_INT_SCC3		(CPM_IRQ_OFFSET + CPMVEC_SCC3)
+#define MPC8xx_INT_SCC4		(CPM_IRQ_OFFSET + CPMVEC_SCC4)
+#define MPC8xx_INT_SMC1		(CPM_IRQ_OFFSET + CPMVEC_SMC1)
+#define MPC8xx_INT_SMC2		(CPM_IRQ_OFFSET + CPMVEC_SMC2)
+
 /* The internal interrupts we can configure as we see fit.
  * My personal preference is CPM at level 2, which puts it above the
  * MBX PCI/ISA/IDE interrupts.
include/asm-ppc/mpc8xx.h +16 -0
@@ -97,6 +97,22 @@ extern unsigned char __res[];
 
 struct pt_regs;
 
+enum ppc_sys_devices {
+	MPC8xx_CPM_FEC1,
+	MPC8xx_CPM_FEC2,
+	MPC8xx_CPM_I2C,
+	MPC8xx_CPM_SCC1,
+	MPC8xx_CPM_SCC2,
+	MPC8xx_CPM_SCC3,
+	MPC8xx_CPM_SCC4,
+	MPC8xx_CPM_SPI,
+	MPC8xx_CPM_MCC1,
+	MPC8xx_CPM_MCC2,
+	MPC8xx_CPM_SMC1,
+	MPC8xx_CPM_SMC2,
+	MPC8xx_CPM_USB,
+};
+
 #endif /* !__ASSEMBLY__ */
 #endif /* CONFIG_8xx */
 #endif /* __CONFIG_8xx_DEFS */
include/asm-ppc/ppc_sys.h +2 -0
@@ -27,6 +27,8 @@
 #include <asm/mpc83xx.h>
 #elif defined(CONFIG_85xx)
 #include <asm/mpc85xx.h>
+#elif defined(CONFIG_8xx)
+#include <asm/mpc8xx.h>
 #elif defined(CONFIG_PPC_MPC52xx)
 #include <asm/mpc52xx.h>
 #elif defined(CONFIG_MPC10X_BRIDGE)