Skip to contentSkip to conversation

Assertion failed in libata-core.c:ata_qc_complete(3051)

DISCUSSION Bernardo Innocenti 4 participants 6 messages Sep 17, 2005 – Sep 18, 2005

lore
Share & tools
lore
#0 lore raw

Sorry for attaching a screenshot, I couldn't find a better way to grab the panic message :-)

I get this panic occasionally (every 1-2 days) since I upgraded to kernel-2.6.12-1.1447_FC4.
I've gone back to 2.6.12-1.1369_FC4 and the machine has not yet crashed after 3 days.

I have a Promise TX4 controller with 4 SATA drivers formatted with a RAID1 and a RAID5 md. LVM on top of this.

The relevant changelog is:

* Sat Aug 27 2005 Dave Jones <[email protected]> [2.6.12-1.1447_FC4]
- Better identify local builds. (#159696)
- Fix disk/net dump & netconsole. (#152586)
- Fix up sleeping in invalid context in sym2 driver. (#164995)
- Fix 'semaphore is not ready' error in snd-intel8x0m.
- Restore hwclock functionality on some systems. (#144894)
- Merge patches proposed for 2.6.12.6
- Fix typo in ALPS driver.
- Fix 'No sense' error with Transcend USB key. (#162559)
- Fix up ide-scsi check for medium not present. (#160868)
- powernow-k8 driver update from 2.6.13rc7.

* Wed Aug 24 2005 Dave Jones <[email protected]> [2.6.12-1.1435_FC4]
- Work around AMD x86-64 errata 122.

* Wed Aug 24 2005 Rik van Riel <[email protected]>
- upgrade to today's Xen snapshot

* Tue Aug 23 2005 Rik van Riel <[email protected]>
- make sure that the vsyscall-note is linked in so the right glibc is used

* Mon Aug 22 2005 Rik van Riel <[email protected]>
- fix the Xen vsyscall problem

* Fri Aug 19 2005 David Woodhouse <[email protected]>
- Don't probe 8250 ports on ppc32 unless they're in the device tree
- Enable ISDN, 8250 console, i8042 keyboard controller on ppc32
- Audit updates from git tree

* Thu Aug 18 2005 Rik van Riel <[email protected]>
- temporarily disable the vsyscall page for Xen

* Wed Aug 17 2005 Dave Jones <[email protected]>
- Restrict ipsec socket policy loading to CAP_NET_ADMIN. (CAN-2005-2555)

* Tue Aug 16 2005 Rik van Riel <[email protected]>
- upgrade Xen to a newer version

* Tue Aug 16 2005 Dave Jones <[email protected]>
- 2.6.11.5
- Fix module_verify_elf check that rejected valid .ko files. (#165528)

* Fri Aug 12 2005 Dave Jones <[email protected]>
- Audit speedup in syscall path.
- Update to a newer ACPI drop.

* Sat Aug 06 2005 Dave Jones <[email protected]> [2.6.12-1.1420_FC4]
- update to final 2.6.12.4 patchset.
- ACPI update to 20050729.
- Disable experimental ACPI HOTKEY driver. (#163355)

* Fri Aug 05 2005 Dave Jones <[email protected]>
- Enable Amiga partition support. (#149802)

* Thu Aug 04 2005 Dave Jones <[email protected]> [2.6.12-1.1411_FC4]
- Include pre-release 2.6.12.4 patchset
- Silence some messages from PowerMac thermal driver. (#158739)
- nfs server intermitently claimed ENOENT on existing files or directories. (#150759)
- Stop usbhid driver incorrectly claiming Wireless Security Lock as a mouse. (#147479)
- Further NFSD fixing for non-standard ports.
- Fix up miscalculated i_nlink in /proc (#162418)
- Fix addrlen checks in selinux_socket_connect. (#164165)

* Fri Jul 29 2005 Dave Jones <[email protected]>
- Fix compilation with older gcc. (#164041)

* Sat Jul 16 2005 Dave Jones <[email protected]>
- Enable the DC395x driver. (#151010)

* Sat Jul 16 2005 Dave Jones <[email protected]> [2.6.12-1.1398_FC4]
- Include a number of patches likely to show up in 2.6.12.3

Signature · 2 lines
  // Bernardo Innocenti - Develer S.r.l., R&D dept.
\X/  http://www.develer.com/
#1 lore raw

On Sab, Setembro 17, 2005 2:09 am, Bernardo Innocenti disse:

Quoted 11 lines

Sorry for attaching a screenshot, I couldn't find a better way to grab the panic message :-)

I get this panic occasionally (every 1-2 days) since I upgraded to kernel-2.6.12-1.1447_FC4.
I've gone back to 2.6.12-1.1369_FC4 and the machine has not yet crashed after 3 days.

I have a Promise TX4 controller with 4 SATA drivers formatted with a RAID1 and a RAID5 md. LVM on top of this.

Can you reproduce this with a stock kernel? Also, i think it would be better if instead of sending a screenshot, get a serial cable and boot with console=ttyS*

#2 lore raw
Quoted 4 lines · Matheus Izvekov
Quoted 2 lines

I have a Promise TX4 controller with 4 SATA drivers formatted with a RAID1 and a RAID5 md. LVM on top of this.

Can you reproduce this with a stock kernel?

I've just opened the case to install some more RAM and noticed that the SATA controller card wasn't completely fitted into the PCI slot. Could it be just a hardware problem? I don't know what that assartion is about.

Nowadays, Fedora kernels don't differ much from stock kernels plus the usual bugfixes. I've now upgraded to 2.6.13-1.1555-FC5 because it fixes an iptables bug. I'll report if I see this bug again.

Quoted 3 lines

Also, i think it would be
better if instead of sending a screenshot, get a serial cable and boot with console=ttyS*

This is happening on our production server, and there are no other computers next to it, so I can't easily hook in a serial cable.

Signature · 2 lines
  // Bernardo Innocenti - Develer S.r.l., R&D dept.
\X/  http://www.develer.com/
#3 lore raw
Quoted 7 lines · Bernardo Innocenti
Quoted 4 lines · Matheus Izvekov
Quoted 2 lines

I have a Promise TX4 controller with 4 SATA drivers formatted with a RAID1 and a RAID5 md. LVM on top of this.

Can you reproduce this with a stock kernel?

Quoted 7 lines

I've just opened the case to install some more RAM and noticed that the SATA controller card wasn't completely fitted into the PCI slot. Could it be just a hardware problem? I don't know what that assartion is about.

Nowadays, Fedora kernels don't differ much from stock kernels plus the usual bugfixes. I've now upgraded to

They still do differ though. When asked to retest with a stock kernel, indulging the person who asks is usually a good idea if you want your problem solved :)

Quoted 4 lines

2.6.13-1.1555-FC5 because it fixes an iptables bug. I'll report if I see this bug again.

Quoted 8 lines
Quoted 3 lines

Also, i think it would be
better if instead of sending a screenshot, get a serial cable and boot with console=ttyS*

This is happening on our production server, and there are no other computers next to it, so I can't easily hook in a serial cable.

netconsole may be a useful alternative for you then. See Documentation/networking/netconsole.txt

Signature · 3 lines
Jesper Juhl <[email protected]>
Don't top-post  http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please      http://www.expita.com/nomime.html
#4 lore raw
Quoted 13 lines · Jesper Juhl
Quoted 12 lines · Bernardo Innocenti
Quoted 4 lines · Matheus Izvekov
Quoted 2 lines

I have a Promise TX4 controller with 4 SATA drivers formatted with a RAID1 and a RAID5 md. LVM on top of this.

Can you reproduce this with a stock kernel?

I've just opened the case to install some more RAM and noticed that the SATA controller card wasn't completely fitted into the PCI slot. Could it be just a hardware problem? I don't know what that assartion is about.

Quoted 6 lines
Quoted 2 lines

Nowadays, Fedora kernels don't differ much from stock kernels plus the usual bugfixes. I've now upgraded to

They still do differ though. When asked to retest with a stock kernel, indulging the person who asks is usually a good idea if you want your problem solved :)

libata / scsi layer in that kernel should be 1:1 to mainline as of 2.6.12

Dave

#5 lore raw
In reply to Jesper Juhl
Quoted 7 lines · Jesper Juhl
Quoted 5 lines · Bernardo Innocenti

I've just opened the case to install some more RAM and noticed that the SATA controller card wasn't completely fitted into the PCI slot. Could it be just a hardware problem? I don't know what that assartion is about.

Quoted 6 lines
Quoted 2 lines

Nowadays, Fedora kernels don't differ much from stock kernels plus the usual bugfixes. I've now upgraded to

They still do differ though. When asked to retest with a stock kernel, indulging the person who asks is usually a good idea if you want your problem solved :)

I appreciate Matheus's help, but installing a stock kernel on a production server and waiting a few days to see if the bug shows up is problematic for me.

I've already reviewed Fedora-specific changes in this kernel and none of them appears to be related to my problem. The only patch that comes close is:

linux-2.6.11-libata-promise-pata-on-sata.patch

Quoted 6 lines
Quoted 3 lines

This is happening on our production server, and there are no other computers next to it, so I can't easily hook in a serial cable.

netconsole may be a useful alternative for you then. See Documentation/networking/netconsole.txt

Thanks for the suggestion. I think I'll leave it enabled on the server. I've just compiled the netconsole module, but it depends on the non-modular netpoll, so I'll have to wait until next reboot in order to try it out.

By the way, the documentation doesn't say how to interface with syslogd. Is it sufficient to use port 514 and turning on the -r option?

Signature · 2 lines
  // Bernardo Innocenti - Develer S.r.l., R&D dept.
\X/  http://www.develer.com/