Skip to contentSkip to conversation

dependance loop on 2.6.14-rc1-mm1

DISCUSSION trem 3 participants 4 messages Sep 17, 2005

lore
Share & tools
lore

trem

author
#0 lore raw

Hi

I've tried to compile a 2.6.14-rc1-mm1 on my amd64. When I do the make modules_install, I have this warning:

if [ -r System.map -a -x /sbin/depmod ]; then /sbin/depmod -ae -F System.map 2.6.14-rc1-mm1; fi
WARNING: Module /lib/modules/2.6.14-rc1-mm1/kernel/drivers/serial/serial_cs.ko ignored, due to loop
WARNING: Module /lib/modules/2.6.14-rc1-mm1/kernel/drivers/serial/serial_core.ko ignored, due to loop
WARNING: Module /lib/modules/2.6.14-rc1-mm1/kernel/drivers/serial/8250_pnp.ko ignored, due to loop
WARNING: Module /lib/modules/2.6.14-rc1-mm1/kernel/drivers/serial/8250_pci.ko ignored, due to loop
WARNING: Module /lib/modules/2.6.14-rc1-mm1/kernel/drivers/serial/8250_acpi.ko ignored, due to loop
WARNING: Loop detected: /lib/modules/2.6.14-rc1-mm1/kernel/drivers/serial/8250.ko needs serial_core.ko which needs 8250.ko again!
WARNING: Module /lib/modules/2.6.14-rc1-mm1/kernel/drivers/serial/8250.ko ignored, due to loop
WARNING: Module /lib/modules/2.6.14-rc1-mm1/kernel/drivers/parport/parport_serial.ko ignored, due to loop
WARNING: Module /lib/modules/2.6.14-rc1-mm1/kernel/drivers/char/mwave/mwave.ko ignored, due to loop

You can found the .config I've used here : http://www.zarb.org/~trem/config_loop.txt

It's a allmodconfig config with all ISDN and "Digi International NEO PCI Support" set to OFF. I've "removed" both option because they generate error when compiling.

I don't understand why I have this warning.

Thanks for any help,
trem

#1 lore raw
Quoted 7 lines · trem

I've tried to compile a 2.6.14-rc1-mm1 on my amd64. When I do the make modules_install,
I have this warning:

WARNING: Loop detected:
/lib/modules/2.6.14-rc1-mm1/kernel/drivers/serial/8250.ko needs serial_core.ko which needs 8250.ko again!

This looks suspicious. 8250 should need serial_core, but there's no way in hell serial_core should require 8250.

Seems to be caused by the kgdb patches, which add the following to serial_core:

+#ifdef CONFIG_KGDB
+ {
+ extern int kgdb_irq;
+
+ if (port->irq == kgdb_irq)
+ return;
+ }
+#endif
+

and kgdb_irq comes from the 8250 module.

Tom, can this dependency be solved before kgdb goes near mainline please?

Signature · 3 lines
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 Serial core
author
#2 lore raw

Hi

I've done a little test, I've remove this line from serial_core.c

+#ifdef CONFIG_KGDB
+ {
+ extern int kgdb_irq;
+
+ if (port->irq == kgdb_irq)
+ return;
+ }
+#endif

and now the make modules_install works fine.

thanks for the help,
trem

Quoted 34 lines · Russell King
Quoted 7 lines · trem

I've tried to compile a 2.6.14-rc1-mm1 on my amd64. When I do the make modules_install, I have this warning:

WARNING: Loop detected:
/lib/modules/2.6.14-rc1-mm1/kernel/drivers/serial/8250.ko needs serial_core.ko which needs 8250.ko again!

This looks suspicious. 8250 should need serial_core, but there's no way in hell serial_core should require 8250.

Seems to be caused by the kgdb patches, which add the following to serial_core:

(quoted diff) +9 -0
+#ifdef CONFIG_KGDB
+       {
+               extern int kgdb_irq;
+
+               if (port->irq == kgdb_irq)
+                       return;
+       }
+#endif
+

and kgdb_irq comes from the 8250 module.

Tom, can this dependency be solved before kgdb goes near mainline please?

#3 lore raw
In reply to Russell King
Quoted 25 lines · Russell King
Quoted 7 lines · trem

I've tried to compile a 2.6.14-rc1-mm1 on my amd64. When I do the make modules_install,
I have this warning:

WARNING: Loop detected:
/lib/modules/2.6.14-rc1-mm1/kernel/drivers/serial/8250.ko needs serial_core.ko which needs 8250.ko again!

This looks suspicious. 8250 should need serial_core, but there's no way in hell serial_core should require 8250.

Seems to be caused by the kgdb patches, which add the following to serial_core:

(quoted diff) +9 -0
+#ifdef CONFIG_KGDB
+       {
+               extern int kgdb_irq;
+
+               if (port->irq == kgdb_irq)
+                       return;
+       }
+#endif
+
Quoted 4 lines

and kgdb_irq comes from the 8250 module.

Tom, can this dependency be solved before kgdb goes near mainline please?

My KGDB isn't in -mm yet, that comes from George Anzginer's version. This is a non-issue in mine, it really just adds yet another/different release function.

Signature · 2 lines
Tom Rini
http://gate.crashing.org/~trini/