NFS client got stale NFS handle after server reboot
Subsystems (2)
Hi all,
I set up a NFS server using kernel NFS in kernel 2.6.11.4-21.9 from SuSE. I defined three directories to be exported using netgroups and all is working fine, as they can be mounted as intended by all the nodes in the cluster.
Up to now I was used to have the NFS feature, that a "hard" mount on the nodes will survive a reboot of the NFS server. This is now no longer the case. If I reboot the server, all the nodes get a stale NFS handle. I can achieve the same effect by simple stopping and starting the nfsd - same result.
As we use a RAID card for the disks in the server, I got the idea of changing major-minor numbers and also tried to give in the "exports" file a chosen "fsid=" for each of the three exports. (Although starting/stopping the nfsd won't change the major-minor numbers I think.) No change.
Now the funny part: login to a node. Choose any of the three imported directories. Make an "umount" and "mount" on this dir - and also the other two dirs reappear and are accessible again.
Does anyone has an explanation and/or solution for this setup, to get the surviving feature back?
CU - Reuti
(BTW: all partitions are ext2 on x86 machines)
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs