Skip to contentSkip to conversation

PCI Express or TG3 issue

DISCUSSION Shawn M. Campbell 3 participants 3 messages Sep 21, 2005

lore
Share & tools
lore
#0 lore raw

I have an IBM ThinkCentre A51 (8122-34U). It has a Broadcom BCM5751 Gigabit PCI Express ethernet adapter. I have not been able to get the adapter to work and I am trying to determine if the problem is related to PCI code or NIC driver code. I thought that it might be PCI code since both the tg3 and Broadcom supplied drivers failed with similar error messages. I am not sure how to diagnose the problem further. If you could direct me to someone that might be able to help or can offer any insight into what to try next in order to diagnose the problem, it would be greatly appreciated. I have provided as many important details below as possible. Please contact me if anything is needed.

Thank you.

Shawn

I have tried the following list of kernels.

Quoted 1 line

From Debian packages:

2.4.26-1-386
2.4.27-1-386
2.6.11-1-686
2.6.12-1-686

Quoted 1 line

From kernel.org sources:

2.4.31
2.6.13.1
2.6.14-rc2

I have also tried the latest bcm5700 driver from Broadcom without success. Since neither the broadcom supplied
I am running Debian Linux with Sarge, Woody, and Testing branch apt sources.

Entries from /var/log/dmesg (Linux Kernel 2.6.14-rc2):

For tg3:

tg3.c:v3.40 (September 15, 2005)
PCI: Device 0000:02:00.0 not available because of resource collisions
tg3: Cannot enable PCI device, aborting.
tg3: probe of 0000:02:00.0 failed with error -22

For bcm5700 from Broadcom:

Broadcom Gigabit Ethernet Driver bcm5700 with Broadcom NIC Extension (NICE) ver. 8.2.18 (08/01/05)
PCI: Device 0000:02:00.0 not available because
of resource collisions
bcm5700: probe of 0000:02:00.0 failed with err or -22

Output from lspci -vv:

0000:00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Processor to I/O Controller (rev 04)
Subsystem: IBM: Unknown device 02f7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <available only to root>

0000:00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller (rev 04) (prog-if 00 [VGA])
Subsystem: IBM: Unknown device 02f7
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 0
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=512K]
        Region 1: I/O ports at 34e0 [size=8]
        Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
        Region 3: Memory at d0280000 (32-bit, non-prefetchable) [size=256K]
        Capabilities: <available only to root>

0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 0, Cache Line Size: 0x08 (32 bytes)
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Memory behind bridge: d0000000-d00fffff
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: <available only to root>

0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: IBM: Unknown device 02f7
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 201
Region 4: I/O ports at 3440 [size=32]

0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: IBM: Unknown device 02f7
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 193
Region 4: I/O ports at 3460 [size=32]

0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: IBM: Unknown device 02f7
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 209
Region 4: I/O ports at 3480 [size=32]

0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: IBM: Unknown device 02f7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 201
Region 0: Memory at d04c0000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <available only to root>

0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=56 I/O behind bridge: 00004000-00004fff
Memory behind bridge: d0100000-d01fffff
Prefetchable memory behind bridge: 0000000030000000-0000000030000000
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <available only to root>

0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
Subsystem: IBM: Unknown device 02f7
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 0
        Interrupt: pin A routed to IRQ 169
        Region 0: I/O ports at 3000 [size=256]
        Region 1: I/O ports at 3400 [size=64]
        Region 2: Memory at d04c0800 (32-bit, non-prefetchable) [size=512]
        Region 3: Memory at d04c0400 (32-bit, non-prefetchable) [size=256]
        Capabilities: <available only to root>

0000:00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
Subsystem: IBM: Unknown device 02f7
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0

0000:00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) (prog-if 80 [Master])
Subsystem: IBM: Unknown device 02f7
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 193
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 34d0 [size=16]
Capabilities: <available only to root>

0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
Subsystem: IBM: Unknown device 02f7
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 9
Region 4: I/O ports at 34a0 [size=32]

0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 11)
Subsystem: IBM: Unknown device 02f7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <available only to root>

0000:0a:00.0 Communication controller: Conexant: Unknown device 2702 (rev 01)
Subsystem: Conexant: Unknown device 2002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 32
        Interrupt: pin A routed to IRQ 9
        Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
        Region 1: I/O ports at 4400 [size=8]
        Capabilities: <available only to root>

0000:0a:01.0 Ethernet controller: Linksys NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
Subsystem: Linksys: Unknown device 0574
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 55 (63750ns min, 63750ns max), Cache Line Size: 0x08
(32 bytes)
        Interrupt: pin A routed to IRQ 193
        Region 0: I/O ports at 4000 [size=256]
        Region 1: Memory at d0110000 (32-bit, non-prefetchable) [size=1K]
        Expansion ROM at 30000000 [disabled] [size=128K]
        Capabilities: <available only to root>

Output from lspci -n:

0000:00:00.0 0600: 8086:2580 (rev 04)
0000:00:02.0 0300: 8086:2582 (rev 04)
0000:00:1c.0 0604: 8086:2660 (rev 03)
0000:00:1d.0 0c03: 8086:2658 (rev 03)
0000:00:1d.1 0c03: 8086:2659 (rev 03)
0000:00:1d.2 0c03: 8086:265a (rev 03)
0000:00:1d.7 0c03: 8086:265c (rev 03)
0000:00:1e.0 0604: 8086:244e (rev d3)
0000:00:1e.2 0401: 8086:266e (rev 03)
0000:00:1f.0 0601: 8086:2640 (rev 03)
0000:00:1f.2 0101: 8086:2651 (rev 03)
0000:00:1f.3 0c05: 8086:266a (rev 03)
0000:02:00.0 0200: 14e4:1677 (rev 11)
0000:0a:00.0 0780: 14f1:2702 (rev 01)
0000:0a:01.0 0200: 1317:0985 (rev 11)

#1 lore raw
Quoted 10 lines · Shawn M. Campbell

0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 11)
Subsystem: IBM: Unknown device 02f7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at <ignored> (64-bit, non-prefetchable)

                    ^^^^^^^^^^^^^^^^^^
		    Problem.

hexdump /proc/bus/pci/02/00.0 and send it here.

#2 lore raw
Quoted 5 lines
Quoted 1 line

Region 0: Memory at <ignored> (64-bit, non-prefetchable)

                    ^^^^^^^^^^^^^^^^^^
		    Problem.

hexdump /proc/bus/pci/02/00.0 and send it here.

Or `lspci -vvbx'.

Have a nice fortnight

Signature · 3 lines
Martin `MJ' Mares   <[email protected]>   http://atrey.karlin.mff.cuni.cz/~mj/
Faculty of Math and Physics, Charles University, Prague, Czech Rep., Earth
"Beware of bugs in the above code; I have only proved it correct, not tried it." -- D.E.K.