Skip to contentSkip to conversation

Use .incbin for config_data.gz

PATCH In review Brian Gerst 2 participants 3 messages Sep 24, 2005 – Sep 25, 2005

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Use .incbin for config_data.gz

Instead of creating config_data.h, use .incbin in inline assembly to directly include config_data.gz.

Subject: [PATCH] Use .incbin for config_data.gz

Instead of creating config_data.h, use .incbin in inline assembly to directly include config_data.gz.

---

 kernel/Makefile  |    9 +--------
 kernel/configs.c |   18 +++++++++++++-----
 2 files changed, 14 insertions(+), 13 deletions(-)

5674a0222370187dbe3401cb7a380c491a13f167

kernel/Makefile +1 -8
@@ -41,16 +41,9 @@ ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_P
 CFLAGS_sched.o := $(PROFILING) -fno-omit-frame-pointer
 endif
 
-$(obj)/configs.o: $(obj)/config_data.h
+$(obj)/configs.o: $(obj)/config_data.gz
 
-# config_data.h contains the same information as ikconfig.h but gzipped.
 # Info from config_data can be extracted from /proc/config*
 targets += config_data.gz
 $(obj)/config_data.gz: .config FORCE
 	$(call if_changed,gzip)
-
-quiet_cmd_ikconfiggz = IKCFG   $@
-      cmd_ikconfiggz = (echo "static const char kernel_config_data[] = MAGIC_START"; cat $< | scripts/bin2c; echo "MAGIC_END;") > $@
-targets += config_data.h
-$(obj)/config_data.h: $(obj)/config_data.gz FORCE
-	$(call if_changed,ikconfiggz)
kernel/configs.c +13 -5
@@ -46,12 +46,20 @@
  */
 #define MAGIC_START	"IKCFG_ST"
 #define MAGIC_END	"IKCFG_ED"
-#include "config_data.h"
 
+asm(
+".data\n"
+"	.ascii \"" MAGIC_START "\"\n"
+"kernel_config_data:\n"
+"	.incbin \"kernel/config_data.gz\"\n"
+"kernel_config_data_end:\n"
+"	.ascii \"" MAGIC_END "\"\n"
+".previous\n"
+);
 
-#define MAGIC_SIZE (sizeof(MAGIC_START) - 1)
-#define kernel_config_data_size \
-	(sizeof(kernel_config_data) - 1 - MAGIC_SIZE * 2)
+extern const char kernel_config_data[], kernel_config_data_end[];
+
+#define kernel_config_data_size (kernel_config_data_end - kernel_config_data)
 
 #ifdef CONFIG_IKCONFIG_PROC
 
@@ -69,7 +77,7 @@ ikconfig_read_current(struct file *file,
 		return 0;
 
 	count = min(len, (size_t)(kernel_config_data_size - pos));
-	if (copy_to_user(buf, kernel_config_data + MAGIC_SIZE + pos, count))
+	if (copy_to_user(buf, kernel_config_data + pos, count))
 		return -EFAULT;
 
 	*offset += count;
#1 lore raw

Hi Brian,

Quoted 2 lines · Brian Gerst

Instead of creating config_data.h, use .incbin in inline assembly to directly include config_data.gz.

Good idea, but please make this .rodata instead of .data, since this isn't going to be modified.

Regards

Ingo Oeser

#2 lore raw
Quoted 8 lines · Ingo Oeser

Hi Brian,

Quoted 2 lines · Brian Gerst

Instead of creating config_data.h, use .incbin in inline assembly to directly include config_data.gz.

Quoted 7 lines

Good idea, but please make this .rodata instead of .data, since this isn't going to be modified.

Regards

Ingo Oeser

New patch putting the config data in .rodata.

Subject: [PATCH] Use .incbin for config_data.gz

Instead of creating config_data.h, use .incbin in inline assembly to directly include config_data.gz.

---

 kernel/Makefile  |    9 +--------
 kernel/configs.c |   18 +++++++++++++-----
 2 files changed, 14 insertions(+), 13 deletions(-)

5674a0222370187dbe3401cb7a380c491a13f167

kernel/Makefile +1 -8
@@ -41,16 +41,9 @@ ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_P
 CFLAGS_sched.o := $(PROFILING) -fno-omit-frame-pointer
 endif
 
-$(obj)/configs.o: $(obj)/config_data.h
+$(obj)/configs.o: $(obj)/config_data.gz
 
-# config_data.h contains the same information as ikconfig.h but gzipped.
 # Info from config_data can be extracted from /proc/config*
 targets += config_data.gz
 $(obj)/config_data.gz: .config FORCE
 	$(call if_changed,gzip)
-
-quiet_cmd_ikconfiggz = IKCFG   $@
-      cmd_ikconfiggz = (echo "static const char kernel_config_data[] = MAGIC_START"; cat $< | scripts/bin2c; echo "MAGIC_END;") > $@
-targets += config_data.h
-$(obj)/config_data.h: $(obj)/config_data.gz FORCE
-	$(call if_changed,ikconfiggz)
kernel/configs.c +13 -5
@@ -46,12 +46,20 @@
  */
 #define MAGIC_START	"IKCFG_ST"
 #define MAGIC_END	"IKCFG_ED"
-#include "config_data.h"
 
+asm(
+".section .rodata, \"a\"\n"
+"	.ascii \"" MAGIC_START "\"\n"
+"kernel_config_data:\n"
+"	.incbin \"kernel/config_data.gz\"\n"
+"kernel_config_data_end:\n"
+"	.ascii \"" MAGIC_END "\"\n"
+".previous\n"
+);
 
-#define MAGIC_SIZE (sizeof(MAGIC_START) - 1)
-#define kernel_config_data_size \
-	(sizeof(kernel_config_data) - 1 - MAGIC_SIZE * 2)
+extern const char kernel_config_data[], kernel_config_data_end[];
+
+#define kernel_config_data_size (kernel_config_data_end - kernel_config_data)
 
 #ifdef CONFIG_IKCONFIG_PROC
 
@@ -69,7 +77,7 @@ ikconfig_read_current(struct file *file,
 		return 0;
 
 	count = min(len, (size_t)(kernel_config_data_size - pos));
-	if (copy_to_user(buf, kernel_config_data + MAGIC_SIZE + pos, count))
+	if (copy_to_user(buf, kernel_config_data + pos, count))
 		return -EFAULT;
 
 	*offset += count;