maximum size
hi,
i'd been already asked, but don't get any answer. what is the maximum size of a raid5 and raid5 partition in kerenel 2.6? i try to find the answer but found only kernel 2.4 info. thanks in advance.
Signature · 1 line
Levente "Si vis pacem para bellum!"
Quoted 3 lines · Farkas Levente
hi,
i'd been already asked, but don't get any answer. what is the maximum size of a raid5 and raid5 partition in kerenel 2.6? i try to find the answer but found only kernel 2.4 info. thanks in advance.
Don't know about max sizes, but I have a 2.1TB raid-5 and a 3TB raid-6 here. No issues at all. Had to move to 2.6 as 2.4 did not support > 2TB filesystems
Brad
Signature · 3 lines
"Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so." -- Douglas Adams
Quoted 6 lines · On Tuesday September 27, [email protected] wrote:
hi,
i'd been already asked, but don't get any answer. what is the maximum size of a raid5 and raid5 partition in kerenel 2.6? i try to find the answer but found only kernel 2.4 info.
thanks in advance.
Providing you are using either 64bit hardware, or the 'LBD' (large block device) config, then raid5 arrays can be up to 2^64 - i.e. enormous - no practical limit.
I don't know what you mean by 'raid5 partition'. If you mean like a regular partition of a device, then the partition can be nearly as bit as the array....
Component devices in a raid5 cannot be larger than 2 terabytes, but I don't think you can buy devices that big yet.
NeilBrown
Quoted 11 lines · Neil Brown
Quoted 4 lines · On Tuesday September 27, [email protected] wrote:
hi,
i'd been already asked, but don't get any answer. what is the maximum size of a raid5 and raid5 partition in kerenel 2.6? i try to find the answer but found only kernel 2.4 info. thanks in advance.Providing you are using either 64bit hardware, or the 'LBD' (large block device) config, then raid5 arrays can be up to 2^64 - i.e. enormous - no practical limit.
huu, i don't know. we use 3ware 7506 controller. on it onw homepage it said:
---------------------------
Supports up to 12 drives with a single PCI card enabling up to 3.6 terabytes of storage (dependent on drive capacity, 2TB per array maximum)
---------------------------
but it's all about the hardware raid5. so it's native hardware raid5 can't be larger than 2TB.
and another quote:
---------------------------
PCI 2.2 compliant 64-bit / 66MHz bus master (2-port controllers are
32-bit / 66MHz PCI compliant)
---------------------------
but it's the pci bus interface not the device.
and as we use in jbod mode there is no info about it. and i read again the spec but can't find any info about it.
Quoted 3 lines
I don't know what you mean by 'raid5 partition'. If you mean like a regular partition of a device, then the partition can be nearly as bit as the array....
suppose i create the raid device with:
mdadm --create /dev/md0--level=5 --raid-devices=8 --spare-devices=1 /dev/sd[abcdefgh]1 then what is the maximum size for /dev/md0?
(or more precisely after a mkfs.ext3 /dev/md0).
yours.
Signature · 1 line
Levente "Si vis pacem para bellum!"
Quoted 15 lines · On Tuesday September 27, [email protected] wrote:
Quoted 10 lines · Neil Brown
Quoted 6 lines · On Tuesday September 27, [email protected] wrote:
hi,
i'd been already asked, but don't get any answer. what is the maximum size of a raid5 and raid5 partition in kerenel 2.6? i try to find the answer but found only kernel 2.4 info.
thanks in advance.Quoted 3 lines
Providing you are using either 64bit hardware, or the 'LBD' (large block device) config, then raid5 arrays can be up to 2^64 - i.e. enormous - no practical limit.
Quoted 8 lines
huu, i don't know. we use 3ware 7506 controller. on it onw homepage it said:
---------------------------
Supports up to 12 drives with a single PCI card enabling up to 3.6 terabytes of storage (dependent on drive capacity, 2TB per array maximum)
---------------------------
but it's all about the hardware raid5. so it's native hardware raid5 can't be larger than 2TB.
Quite possibly. I was talking about 'md' software raid. It don't not have a 2TB limit in 2.6
Quoted 9 lines
Quoted 3 lines
I don't know what you mean by 'raid5 partition'. If you mean like a regular partition of a device, then the partition can be nearly as bit as the array....
suppose i create the raid device with:
mdadm --create /dev/md0--level=5 --raid-devices=8 --spare-devices=1 /dev/sd[abcdefgh]1
then what is the maximum size for/dev/md0?
(or more precisely after a mkfs.ext3/dev/md0).
The /dev/sdX1 cannot be larger than 2TB. The /dev/md0 can be as big as you like. The filesystem can be as big as your filesystem allows. I don't think ext3 can exceed 2 TB (I could be wrong). Other filesystems (reiser, xfs) can certainly use whatever you can through at them.
NeilBrown
On Wed, 28 Sep 2005 at 10:56am, Neil Brown wrote
Quoted 11 lines · On Tuesday September 27, [email protected] wrote:
Quoted 6 lines
suppose i create the raid device with:
mdadm --create /dev/md0--level=5 --raid-devices=8 --spare-devices=1 /dev/sd[abcdefgh]1
then what is the maximum size for/dev/md0?
(or more precisely after a mkfs.ext3/dev/md0).The
/dev/sdX1cannot be larger than 2TB. The/dev/md0can be as big as you like. The filesystem can be as big as your filesystem allows. I don't think ext3 can exceed 2 TB (I could be wrong). Other
RH (e.g.) officially supports ext3 FSs up to 8TB in RHEL4.
Signature · 3 lines
Joshua Baker-LePain Department of Biomedical Engineering Duke University
Quoted 10 lines · On Wednesday September 28, [email protected] wrote:
On Wed, 28 Sep 2005 at 10:56am, Neil Brown wrote
Quoted 8 lines · On Tuesday September 27, [email protected] wrote:
Quoted 6 lines
suppose i create the raid device with:
mdadm --create /dev/md0--level=5 --raid-devices=8 --spare-devices=1 /dev/sd[abcdefgh]1
then what is the maximum size for/dev/md0?
(or more precisely after a mkfs.ext3/dev/md0).
Quoted 5 lines
Quoted 3 lines
The
/dev/sdX1cannot be larger than 2TB. The/dev/md0can be as big as you like. The filesystem can be as big as your filesystem allows. I don't think ext3 can exceed 2 TB (I could be wrong). OtherRH (e.g.) officially supports ext3 FSs up to 8TB in RHEL4.
See... I was wrong! :-)
I'm sure there is a 32bit limit somewhere, so it's probably that block addresses are limited to 32 bits. With 4K blocks, that's 2^34 K, or 16TB.... Maybe there is some confusion with the sign bit, making it on 2^33K, or 8TB.
NeilBrown
Quoted 20 lines · Neil Brown
Quoted 11 lines · On Wednesday September 28, [email protected] wrote:
On Wed, 28 Sep 2005 at 10:56am, Neil Brown wrote
Quoted 8 lines · On Tuesday September 27, [email protected] wrote:
Quoted 6 lines
suppose i create the raid device with:
mdadm --create /dev/md0--level=5 --raid-devices=8 --spare-devices=1 /dev/sd[abcdefgh]1
then what is the maximum size for/dev/md0?
(or more precisely after a mkfs.ext3/dev/md0).Quoted 5 lines
Quoted 3 lines
The
/dev/sdX1cannot be larger than 2TB. The/dev/md0can be as big as you like. The filesystem can be as big as your filesystem allows. I don't think ext3 can exceed 2 TB (I could be wrong). OtherRH (e.g.) officially supports ext3 FSs up to 8TB in RHEL4.
Quoted 6 lines
See... I was wrong! :-)
I'm sure there is a 32bit limit somewhere, so it's probably that block addresses are limited to 32 bits. With 4K blocks, that's 2^34 K, or 16TB.... Maybe there is some confusion with the sign bit, making it on 2^33K, or 8TB.
i already find the trivial source kernel/Documentation/filesystems/ext2.txt:
---------------------------------
Filesystem block size: 1kB 2kB 4kB 8kB
File size limit: 16GB 256GB 2048GB 2048GB Filesystem size limit: 2047GB 8192GB 16384GB 32768GB
---------------------------------
Signature · 1 line
Levente "Si vis pacem para bellum!"
Quoted 1 line · Neil Brown
I don't think ext3 can exceed 2 TB (I could be wrong). Other
I have a 3TB ext3 on a raid-6 md here. 2.6.10
Regards,
Brad
Signature · 3 lines
"Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so." -- Douglas Adams
Quoted 6 lines · Farkas Levente
hi,
i'd been already asked, but don't get any answer. what is the maximum size of a raid5 and raid5 partition in kerenel 2.6? i try to find the answer but found only kernel 2.4 info.
thanks in advance.
It depends on what FS you are using as well as if you are doing a software or hardware RAID. With software on a Reiser or XFS it is very very large. On hardware there is usually a controller limitation. I currently have a 3TB partition with Reiser 3 in a RAID5 on a 3ware 9500S-12. However to get this size partition you have to use parted instead of fdisk to create it. Otherwise the largest you will see is 700MB.
Brad Dameron
SeaTab Software
www.seatab.com