Major overhaul for Xilinx ML300 board support
PATCH 1/1 Major overhaul for Xilinx ML300 board support
Attached the CHANGELOG entry for a larger patch that overhauls the ML300 support in U-Boot. The patch is needed as a bug fix for several items around IIC, System ACE CF, and Ethernet MAC that did not work or did not work properly. It is also a preparatory and required patch for additional patches that I plan to submit shortly to add support for more Xilinx boards around Virtex-II Pro and Virtex-4 FX FPGAs. All modifications in this patch affect the board/xilinx sub-directory and include/configs/ml300.h only.
The patch itself is too large to submit to the list (70k). It can be found at
ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.2005-09-27.patch.txt.gz This area is cleaned out on a regular basis. If the patch should no longer be available from this area send me an email and I will upload it again.
The patch applies cleanly against the current CVS tree. It also does not generate any warnings during compilation and passes the "MAKEALL ppc" test (there are errors, e.g. cpci5200, but I cannot see how they could be caused by this patch).
While most parts adhere to the coding style there are some pieces in the patch that do not comply 100%. These pieces are mostly in comments or in include files. I tried to clean this up over the past few days but constantly broke something more important (i.e. code and compilation). I hope this patch can be applied to the CVS tree as is. If so, I plan to submit one or multiple follow-up patches that will fix coding style issues.
After the patch is applied, board/xilinx/ml300/sw_services with all its files and sub-directories should be removed from the CVS tree. This directory has been moved up to board/xilinx/sw_services as it is not specific to the ML300 board and will be reused for other Xilinx boards.
Attached is a second small patch (cm.patch) with changes to the MAINTAINERS and CREDITS file. I hope that's okay.
- Peter
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: CHANGELOG
Url: http://lists.denx.de/pipermail/u-boot/attachments/20050928/127cf032/attachment.txt
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: cm.patch
Url: http://lists.denx.de/pipermail/u-boot/attachments/20050928/127cf032/attachment-0001.txt
PATCH 1/1 Major overhaul for Xilinx ML300 board support
Peter -
I considered using the Xilinx/ml300 infrastructure in U-Boot to assist my port to a custom VirtexIIPro board,
but I was concerned about maintaining synchronization between hardware IP and IP software driver versions.
In the end I took the driver source code generated in EDK and placed it locally in my board-specific
directory. Somehow, there should be a way for a particular Xilinx FPGA processor based board to
select the correct driver versions based on the hardware IP versions used.
Any ideas? I would really
prefer to reference driver code in a common library rather than using a local copy.
Keith
u-boot-users-admin at lists.sourceforge.net wrote on 09/28/2005 01:55:15 AM:
Quoted 4 lines
Attached the CHANGELOG entry for a larger patch that overhauls the ML300
support in U-Boot.