heavy VBR traffic with HTB
Hello!
I made a simple configuration with HTB, 10% http and 90% Video, where http can share the available bandwidth left from video.
But :(... i think HTB it's not very fast and it can't adapt quickly to the great variation of the MPEG 4 VBR (700M film), and some times it jerks a bit in great variations of bandwidth. I'm making a download to have always 100% bandwidth utilization (or near). This setup is running on a controlled home lan.
Have any one tried something like that? am i missing some thing?
Please some one tell me something.
thanks
Tiago
PS: sorry my English :(
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 11 lines · Tiago Bruno Espírito Santo Silva
Hello!
I made a simple configuration with HTB, 10% http and 90% Video, where http can share the available bandwidth left from video.
But :(... i think HTB it's not very fast and it can't adapt quickly to the great variation of the MPEG 4 VBR (700M film), and some times it jerks a bit in great variations of bandwidth. I'm making a download to have always 100% bandwidth utilization (or near). This setup is running on a controlled home lan.
Quoted 3 lines
Have any one tried something like that? am i missing some thing?
Please some one tell me something.
You rates/ceils are probably too high you need to allow for overheads - seeing your script would help.
Andy.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 13 lines · Andy Furniss
Quoted 11 lines · Tiago Bruno Espírito Santo Silva
Hello!
I made a simple configuration with HTB, 10% http and 90% Video, where http can share the available bandwidth left from video.
But :(... i think HTB it's not very fast and it can't adapt quickly to the great variation of the MPEG 4 VBR (700M film), and some times it jerks a bit in great variations of bandwidth. I'm making a download to have always 100% bandwidth utilization (or near). This setup is running on a controlled home lan.
Quoted 7 lines
Quoted 3 lines
Have any one tried something like that? am i missing some thing?
Please some one tell me something.
You rates/ceils are probably too high you need to allow for overheads
- seeing your script would help.
Actually he said he ws *downloading*, and so he probably doesn't have control over the incoming stream.
Remember that you can only really control outgoing rates properly - incoming streams you control indirectly and all you can do is ignore the sender for a while and hope he stops sending you stuff so quickly... So this is probably your problem - HTB reacts instantly, but the sender keeps sending stuff for perhaps several seconds until you stop answering him and then backs off - there is a reaction lag and there is not much you can do about it really.
Ed W
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 37 lines · Ed W
Quoted 13 lines · Andy Furniss
Quoted 11 lines · Tiago Bruno Espírito Santo Silva
Hello!
I made a simple configuration with HTB, 10% http and 90% Video, where http can share the available bandwidth left from video.
But :(... i think HTB it's not very fast and it can't adapt quickly to the great variation of the MPEG 4 VBR (700M film), and some times it jerks a bit in great variations of bandwidth. I'm making a download to have always 100% bandwidth utilization (or near). This setup is running on a controlled home lan.
Quoted 8 lines
Quoted 3 lines
Have any one tried something like that? am i missing some thing?
Please some one tell me something.
You rates/ceils are probably too high you need to allow for overheads
- seeing your script would help.Actually he said he ws *downloading*, and so he probably doesn't have control over the incoming stream.
Remember that you can only really control outgoing rates properly - incoming streams you control indirectly and all you can do is ignore the sender for a while and hope he stops sending you stuff so quickly... So this is probably your problem - HTB reacts instantly, but the sender keeps sending stuff for perhaps several seconds until you stop answering him and then backs off - there is a reaction lag and there is not much you can do about it really.
Quoted 1 line
Ed W
Thanks for the responses!
Well i'm out this days but i'll try to test again when i go back home, I'll send the scripts later this week.
I have 3 PCs, something like this:
A<==>R<==>B
Where R is the router with 2 ethernet cards...so i have in A a http server (tcp) and VLC streaming (udp) to B, i think i can control the outgoing traffic from A to B in the "R"outer.
You are saying to me that with this configuration if the rates/ceils are well chosen, the video streaming must work with no jerks even if the bandwidth is at 100% (or near).
Thanks for your help
Tiago
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc