Bug at mm/rmap.c:493, Kernel 2.6.13.2
Hello,
In the kernel log of a computer I'm administrating a strange message appeared stating there was a kernel bug in mm/rmap.c, line 493. I put together the kernel log message (including the stack trace), the kernel configuration, the output of lspci -v, lsmod, uname -a and gcc/ld -version here:
Although the message says a reboot is needed, the server still seems to work after that message (login using SSH is possible, all services still respond normally). After a reboot the same message reappears inside the log after some time.
The distribution is Gentoo Linux, but the kernel is built from vanilla sources. The system is entirely 64bit - no 32bit libraries are installed. The server itself is a Sun Fire V20z with two Opteron 244, 2 GiB of RAM and hardware RAID-1 with two U320 SCSI disks.
Regards,
Christian
Quoted 14 lines · Christian Seiler
In the kernel log of a computer I'm administrating a strange message appeared stating there was a kernel bug in
mm/rmap.c, line 493. I put together the kernel log message (including the stack trace), the kernel configuration, the output of lspci -v, lsmod, uname -a and gcc/ld -version here:Although the message says a reboot is needed, the server still seems to work after that message (login using SSH is possible, all services still respond normally). After a reboot the same message reappears inside the log after some time.
Quoted 4 lines
The distribution is Gentoo Linux, but the kernel is built from vanilla sources. The system is entirely 64bit - no 32bit libraries are installed. The server itself is a Sun Fire V20z with two Opteron 244, 2 GiB of RAM and hardware RAID-1 with two U320 SCSI disks.
Please try Linus' patch at the bottom: on dual Opteron, our best guess is that yours is a different manifestation of the same underlying issue. (I believe there's now a more finely targetted version of the patch in -rc3, but this will do if it is your problem). Please get back to me if you find this doesn't fix it - thanks.
Here's what Linus said on 20 Sep:
Quoted 4 lines · Charles McCreary
Another datapoint for this thread. The box spewing the bad pmds messages is a dual opteron 246 on a TYAN S2885 Thunder K8W motherboard. Kernel is 2.6.11.4-20a-smp.
This is quite possibly the result of an Opteron errata (tlb flush filtering is broken on SMP) that we worked around as of 2.6.14-rc4.
So either just try 2.6.14-rc2, or try the appended patch (it has since been confirmed by many more people).
Linus
---
diff-tree bc5e8fdfc622b03acf5ac974a1b8b26da6511c99 (from 61ffcafafb3d985e1ab8463be0187b421614775c)
Author: Linus Torvalds <[email protected]> Date: Sat Sep 17 15:41:04 2005 -0700
x86-64/smp: fix random SIGSEGV issues
They seem to have been due to AMD errata 63/122; the fix is to disable TLB flush filtering in SMP configurations.
Confirmed to fix the problem by Andrew Walrond <[email protected]>
[ Let's see if we'll have a better fix eventually, this is the Q&D
"let's get this fixed and out there" version ]
arch/x86_64/kernel/setup.c +15 -0
@@ -831,11 +831,26 @@ static void __init amd_detect_cmp(struct#endif } +#define HWCR 0xc0010015 +static int __init init_amd (struct cpuinfo_x86 *c) {int r;int level; +#ifdef CONFIG_SMP +unsigned long value; + +// Disable TLB flush filter by setting HWCR.FFDIS: +// bit 6 of msr C001_0015 +// +// Errata 63 for SH-B3 steppings +// Errata 122 for all(?) steppings +rdmsrl (HWCR , value); + value |=1 <<6 ; +wrmsrl (HWCR , value); +#endif +/* Bit 31 in normal CPUID used for nonstandard 3DNow ID; 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ clear_bit (0 *32 +31 , &c->x86_capability);
Hello,
Quoted 2 lines
Please try Linus' patch at the bottom: on dual Opteron, our best guess is that yours is a different manifestation of the same underlying issue.
Thanks a lot - this patch really seems to help. The server is now up for 1.5 hours with the kernel patch and the error did not occur anymore.
Furthermore, another issue I had on that computer, seems to be fixed by this patch, too: gcc and ld sometimes failed to compile/link a file at random, gcc exiting with error code 1 and no message and ld exiting with the error message:
Inconsistency detected by ld.so: rtld.c: 1075: dl_main: Assertion `_rtld_local._dl_rtld_map.l_libname' failed!
This error occured at random. It seems to be gone now. I didn't report it here because I thought it was an issue with binutils, gcc or glibc but it seems that this kernel patch fixes it, too.
Thanks!
Christian