Ip route cache problem
Hello,
I need some help about a routing problem on a complex configuration.
The problem is that I can't reach from services outside from my DMZ.
The scenario is a gateway linked to three internet connections, so that I used three distinct iproute2 tables for routing. The gw is running ipvs for balancing over the dmz's servers.
DMZ servers are on 192.168.1.0/24 network, .
Every table has the route to reach :
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.1
I'm using iptables to NAT a server on my DMZ to reach DNS services outsides:
iptables -t nat -A POSTROUTING -p tcp -s 192.168.1.0/24 -d 151.99.0.100 --dport 53 -j SNAT --to-source 81.77.88.99
Looking inside the cache I find only the route to reach the dns server, but not the one that the dns needs to reach my server:
151.99.0.100 from 192.168.1.2 via 81.77.88.100 dev eth2 src 192.168.1.249
cache <src-direct> mtu 1500 advmss 1460 metric10 64 iif eth0
I experieced in the past that reentering the iptables nat command worked, but it seems a random effect and not always works.
Thank's in advance,
Luca Maragnani
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 7 lines
Hello,
I need some help about a routing problem on a complex configuration.The problem is that I can't reach from services outside from my DMZ.
The scenario is a gateway linked to three internet connections, so that I used three distinct iproute2 tables for routing. The gw is running ipvs for balancing over the dmz's servers.
Quoted 8 lines
DMZ servers are on 192.168.1.0/24 network, .
Every table has the route to reach :
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.1I'm using iptables to NAT a server on my DMZ to reach DNS services outsides:
iptables -t nat -A POSTROUTING -p tcp -s 192.168.1.0/24 -d 151.99.0.100 --dport 53 -j SNAT --to-source 81.77.88.99
Have u try to use DNAT from iptables because dnat is in PREROTING , and if u have a dns service u need to make the outside service connection to connect 2 your dns server !
Quoted 8 lines
Looking inside the cache I find only the route to reach the dns server, but not the one that the dns needs to reach my server:
151.99.0.100 from 192.168.1.2 via 81.77.88.100 dev eth2 src 192.168.1.249
cache <src-direct> mtu 1500 advmss 1460 metric10 64 iif eth0I experieced in the past that reentering the iptables nat command worked, but it seems a random effect and not always works.
Thank's in advance,
Luca Maragnani
begin:vcard
fn:Popovici Ionut
n:Ionut;Popovici
org:ISP TOPALL SRL;IT & Network Administrator
adr:Bl.13;;Stefan cel Mare ;Roman;Neamt;5550;Romania email;internet:[email protected]
title:Administrator
tel;work:+40-233-742419
tel;fax:+40-233-744881
tel;home:+40-233-720881
tel;cell:+40-746-251059 note;quoted-printable:.........................................................................=
=0D=0A=
Privileged/Confidential Information may be contained in this message. If=0D=0A= you are not the addressee indicated in this message (or responsible for=0D=0A= delivery of the message to such person), you may not copy or deliver this= =0D=0A=
message to anyone. In such a case, you should destroy this message and=0D=0A= kindly notify the sender by reply e-mail.
x-mozilla-html:FALSE
url:http://www.topall.ro
version:2.1
end:vcard
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Sorry, surely I did'nt explained well the problem.
I don't have DNS services. I need to access dns server at 151.99.0.100 from my servers which have private ip addresses. I think the only thing I need is to SNAT the connection.
Thank's all the same
Luca
Quoted 37 lines · Ionut Popovici
Quoted 15 lines
Hello,
I need some help about a routing problem on a complex configuration.The problem is that I can't reach from services outside from my DMZ.
The scenario is a gateway linked to three internet connections, so that I used three distinct iproute2 tables for routing. The gw is running ipvs for balancing over the dmz's servers.
DMZ servers are on 192.168.1.0/24 network, .
Quoted 8 lines
Every table has the route to reach :
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.1I'm using iptables to NAT a server on my DMZ to reach DNS services outsides:
iptables -t nat -A POSTROUTING -p tcp -s 192.168.1.0/24 -d 151.99.0.100 --dport 53 -j SNAT --to-source 81.77.88.99Have u try to use DNAT from iptables because dnat is in PREROTING , and if u have a dns service u need to make the outside service connection to connect 2 your dns server !
Quoted 9 lines
Looking inside the cache I find only the route to reach the dns server, but not the one that the dns needs to reach my server:
151.99.0.100 from 192.168.1.2 via 81.77.88.100 dev eth2 src 192.168.1.249
cache <src-direct> mtu 1500 advmss 1460 metric10 64 iif eth0I experieced in the past that reentering the iptables nat command worked, but it seems a random effect and not always works.
Quoted 10 lines
Quoted 2 lines
Thank's in advance,
Luca Maragnani_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc