kgdb support in Linux 2.6 for 8xx
Hi,
It would be nice to be able to do some kernel debugging on my TQM823L board running 2.6 (2.6.13.1, to be exact). I have two questions
1. Has anyone got kgdboe working in this configuration? If so, could you give me a pointer to a patch?
2. kgdb over serial is lacking the getDebugChar and putDebugChar functions that used to be in 8xx_io/uart.c. Has anyone done any work on merging them into 2.6?
[OK, that's actually three questions. One just crept in]
Thanks in advance,
Chris
Hi!
Quoted 6 lines · Chris
Hi,
It would be nice to be able to do some kernel debugging on my TQM823L board running 2.6 (2.6.13.1, to be exact). I have two questions
1. Has anyone got kgdboe working in this configuration? If so, could you give me a pointer to a patch?
Not exactly. I have implemented support for KGDB on cpm_uart driven boards (most of 8xx use it), but it is only tested on 827x family. Anyway, 8xx should work with minimal changes.
Quoted 2 lines
2. kgdb over serial is lacking the getDebugChar and putDebugChar functions that used to be in
8xx_io/uart.c. Has anyone done any work on merging them into 2.6?
There is a kgdb community project - http://kgdb.sf.net. The attached patch is for this one (it has been submitted but not in the CVS so far).
Quoted 10 lines
[OK, that's actually three questions. One just crept in]
Thanks in advance,
Chris
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
Signature · 2 lines
Sincerely, Vitaly
This add support for KGDB using cpm_uart driver. Should work on all the boards utilizing it, tested on 8272ADS.
drivers/serial/cpm_uart/Makefile +1 -0
@@ -7,5 +7,6 @@ obj-$(CONFIG_SERIAL_CPM) += cpm_uart.o # Select the correct platform objects. cpm_uart-objs-$(CONFIG_CPM2) += cpm_uart_cpm2.o cpm_uart-objs-$(CONFIG_8xx) += cpm_uart_cpm1.o +cpm_uart-objs-$(CONFIG_KGDB) += cpm_uart_kgdb.o cpm_uart-objs := cpm_uart_core.o $(cpm_uart-objs-y)
drivers/serial/cpm_uart/cpm_uart.h +50 -0
66 lines not on this page · raw message
drivers/serial/cpm_uart/cpm_uart_core.c +64 -51
169 lines not on this page · raw message
drivers/serial/cpm_uart/cpm_uart_cpm2.c +4 -0
@@ -252,6 +252,10 @@ int cpm_uart_init_portdesc(void) {pr_debug ("CPM uart[-]:init portdesc\n" ); +/* Check if we have called this yet. This may happen if early kgdb +breakpoint is on */ +if (cpm_uart_nr) +return 0 ; cpm_uart_nr =0 ;#ifdef CONFIG_SERIAL_CPM_SMC1 cpm_uart_ports[UART_SMC1 ].smcp = (smc_t *) & cpm2_immr->im_smc[0 ];
lib/Kconfig.debug +62 -0
80 lines not on this page · raw message
drivers/serial/cpm_uart/cpm_uart_kgdb.c new file +191 -0
191 lines not on this page · raw message