Skip to contentSkip to conversation

Three-Speed Ethernet support on MPC8560 (TSEC)

DISCUSSION Nathael PAJANI 1 participant 1 message Oct 21, 2005

lore
Share & tools
lore
#0 lore raw
Quoted 8 lines · Kumar Gala
Quoted 3 lines

I will now go on with the Three-Speed Ethernet Controler, and there actually seem to be no support for it, but maybe I did not look at the right place?

The TSEC has been supported for a long time. The driver is call gianfar (drivers/net/gianfar*).

OK, I found it, and remembered that at the begining of the port I wondered what the "struct platform_device ppc_sys_platform_devices[]" was for, now I know. and I'll try this for the FCC3 too.

There is a problem though, which I already had (and fixed) with the boot-loader: The gigabit ethernet is not set up correctly: Everything is fine with a Gigabit switch, but with a Fast ethernet switch there is no communication. I'll look for this on monday!

Thanks a lot for the help !