iptables/multiple external natting problem
Hi,
I'm trying to setup a firewall at our data center and I think I'm missing a few things here. I have a Class C ip range, lets call it 1.2.3.0/24. I have a firewall running kernel 2.6.9 and iptables 1.2.11. My firewall has 2 network interfaces, on the external interface I've added an alias for each external ip that I want to nat to internal servers:
eg. ifconfig eth0:0 1.2.3.10 netmask 255.255.255.0 (Is this the correct way to use multiple ip's?)
My servers on the inside interface are on the 192.168.0.0/24 network.
I'm able to ssh to an internal server via an external ip address.
The problem is I can't seem to connect out (via ssh, dns, www etc) from the inside servers. There is a rule blocking these connections as it shows me in the firewall logs:
Oct 25 18:27:22 fw1 kernel: IN=eth1 OUT=eth0 SRC=192.168.0.20 DST=4.3.2.1 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=28642 DF PROTO=UDP SPT=32769 DPT=53 LEN=40 Oct 25 18:27:31 fw1 kernel: IN=eth1 OUT=eth0 SRC=192.168.0.20 DST=4.3.2.1 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=18271 DF PROTO=TCP SPT=32792 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0
I've attached my firewall script, could someone please take a look at it and give me a hand. Or if they have a similar setup, could you send me your config. If there is a better way to do this, please let me know.
Many thanks,
Marc
Re: iptables/multiple external natting problem (nfcan: addressed to exclusive sender for this address)
Quoted 9 lines · On 2005.10.25 13:40, Marc Peiser - [email protected] wrote:
Hi,
I'm trying to setup a firewall at our data center and I think I'm missing a few things here. I have a Class C ip range, lets call it 1.2.3.0/24. I have a firewall running kernel 2.6.9 and iptables 1.2.11. My firewall has 2 network interfaces, on the external interface I've added an alias for each external ip that I want to nat to internal servers:
eg. ifconfig eth0:0 1.2.3.10 netmask 255.255.255.0 (Is this the correct way to use multiple ip's?)
My servers on the inside interface are on the 192.168.0.0/24 network.
Quoted 7 lines
I'm able to ssh to an internal server via an external ip address.
The problem is I can't seem to connect out (via ssh, dns, www etc) from the inside servers. There is a rule blocking these connections as it shows me in the firewall logs:Oct 25 18:27:22 fw1 kernel: IN=eth1 OUT=eth0 SRC=192.168.0.20 DST=4.3.2.1 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=28642 DF PROTO=UDP SPT=32769 DPT=53 LEN=40 Oct 25 18:27:31 fw1 kernel: IN=eth1 OUT=eth0 SRC=192.168.0.20 DST=4.3.2.1 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=18271 DF PROTO=TCP SPT=32792 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0I've attached my firewall script, could someone please take a look at it and give me a hand. Or if they have a similar setup, could you send me your config. If there is a better way to do this, please let me know.
It appears there is no way to start an outbound connection. You need a rule like this for each outbound service you allow.
$IPT -A FORWARD -i $INT_INTERFACE -o $EXT_INTERFACE -p tcp --dport 22 -m state --state NEW -j ACCEPT
Quoted 3 lines
Many thanks,
Marc