I2O: Beatifying

Index: linux-2.6.14/drivers/message/i2o/bus-osm.c
===================================================================
@@ -17,7 +17,7 @@
 #include <linux/i2o.h>
 
 #define OSM_NAME	"bus-osm"
-#define OSM_VERSION	"$Rev$"
+#define OSM_VERSION	"1.317"
 #define OSM_DESCRIPTION	"I2O Bus Adapter OSM"
 
 static struct i2o_driver i2o_bus_driver;

Index: linux-2.6.14/drivers/message/i2o/config-osm.c
===================================================================
@@ -22,7 +22,7 @@
 #include <asm/uaccess.h>
 
 #define OSM_NAME	"config-osm"
-#define OSM_VERSION	"1.248"
+#define OSM_VERSION	"1.317"
 #define OSM_DESCRIPTION	"I2O Configuration OSM"
 
 /* access mode user rw */

Index: linux-2.6.14/drivers/message/i2o/core.h
===================================================================
@@ -43,9 +43,6 @@
 extern int i2o_iop_add(struct i2o_controller *);
 extern void i2o_iop_remove(struct i2o_controller *);
 
-/* config */
-extern int i2o_parm_issue(struct i2o_device *, int, void *, int, void *, int);
-
 /* control registers relative to c->base */
 #define I2O_IRQ_STATUS	0x30
 #define I2O_IRQ_MASK	0x34

Index: linux-2.6.14/drivers/message/i2o/i2o_block.c
===================================================================
@@ -59,10 +59,12 @@
 #include <linux/blkdev.h>
 #include <linux/hdreg.h>
 
+#include <scsi/scsi.h>
+
 #include "i2o_block.h"
 
 #define OSM_NAME	"block-osm"
-#define OSM_VERSION	"1.287"
+#define OSM_VERSION	"1.316"
 #define OSM_DESCRIPTION	"I2O Block Device OSM"
 
 static struct i2o_driver i2o_block_driver;

@@ -845,10 +847,10 @@
 		 * RETURN_SENSE_DATA_IN_REPLY_MESSAGE_FRAME
 		 */
 		if (rq_data_dir(req) == READ) {
-			cmd[0] = 0x28;
+			cmd[0] = READ_10;
 			scsi_flags = 0x60a0000a;
 		} else {
-			cmd[0] = 0x2A;
+			cmd[0] = WRITE_10;
 			scsi_flags = 0xa0a0000a;
 		}
 

Index: linux-2.6.14/drivers/message/i2o/i2o_proc.c
===================================================================
@@ -28,7 +28,7 @@
  */
 
 #define OSM_NAME	"proc-osm"
-#define OSM_VERSION	"1.145"
+#define OSM_VERSION	"1.316"
 #define OSM_DESCRIPTION	"I2O ProcFS OSM"
 
 #define I2O_MAX_MODULES 4

Index: linux-2.6.14/drivers/message/i2o/i2o_scsi.c
===================================================================
@@ -70,7 +70,7 @@
 #include <scsi/sg_request.h>
 
 #define OSM_NAME	"scsi-osm"
-#define OSM_VERSION	"1.282"
+#define OSM_VERSION	"1.316"
 #define OSM_DESCRIPTION	"I2O SCSI Peripheral OSM"
 
 static struct i2o_driver i2o_scsi_driver;

Index: linux-2.6.14/drivers/message/i2o/iop.c
===================================================================
@@ -32,7 +32,7 @@
 #include "core.h"
 
 #define OSM_NAME	"i2o"
-#define OSM_VERSION	"1.288"
+#define OSM_VERSION	"1.316"
 #define OSM_DESCRIPTION	"I2O subsystem"
 
 /* global I2O controller list */

@@ -732,10 +732,6 @@
 	 * Provide three SGL-elements:
 	 * System table (SysTab), Private memory space declaration and
 	 * Private i/o space declaration
-	 *
-	 * FIXME: is this still true?
-	 * Nasty one here. We can't use dma_alloc_coherent to send the
-	 * same table to everyone. We have to go remap it for them all
 	 */
 
 	msg->body[0] = cpu_to_le32(c->unit + 2);

@@ -758,8 +754,6 @@
 	else
 		osm_debug("%s: SysTab set.\n", c->name);
 
-	i2o_status_get(c);	// Entered READY state
-
 	return rc;
 }
 

@@ -769,7 +763,7 @@
  *
  *	Send the system table and enable the I2O controller.
  *
- *	Returns 0 on success or negativer error code on failure.
+ *	Returns 0 on success or negative error code on failure.
  */
 static int i2o_iop_online(struct i2o_controller *c)
 {

@@ -979,7 +973,7 @@
  *	The HRT contains information about possible hidden devices but is
  *	mostly useless to us.
  *
- *	Returns 0 on success or negativer error code on failure.
+ *	Returns 0 on success or negative error code on failure.
  */
 static int i2o_hrt_get(struct i2o_controller *c)
 {