Skip to contentSkip to conversation

Problems with fcc_enet driver for MPC8248 (2.6.12)

DISCUSSION Carlos Munoz 1 participant 2 messages Nov 17, 2005 – Oct 4, 2006

lore
Share & tools
lore
#0 lore raw

I'm working on an embedded board that is currently running kernel 2.4.28 without any problems. However, I am trying to upgrade from kernel 2.4.28 to kernel 2.6.12 and I'm unable to get the fcc_enet driver to work properly. The fcc ports are connected to ethernet phy devices. The receive and transmitted data out of the ethernet phy devices is all 0xff.

I tried using the fcc_enet driver from the 2.4.28 kernel on the 2.6.12 kernel but get the same results. This leads me to believe that the core initialization of the MPC8248 has changed on kernel 2.6.12.

Has anyone got the fcc ports to work properly on the 2.6.12 kernel ? If yes, how ? Did the MPC8248 core initialization change ?

Thanks,

Carlos Munoz

#1 lore raw

Problems nfs mounting root filesystem

Hi guys,

I have a problem when running off a nfs mounted root filesystem. The kernel mounts the root filesystem successfully. However, when fstab is accessed I get the following error:

Can't find / in /etc/fstab

The fstab looks like this:

none            /tmp                    tmpfs   rw              0       0
none            /proc                   proc    defaults        0       0
none            /sys                    sysfs   defaults        0       0

I add the following line to fstab:

192.168.1.8:/tftpboot/carlos/ppc / nfs rw,rsize=8192,wsize=8192,timeo=14,intr 0 0

and now I get the following error:

mount: Mounting 192.168.1.8:/tftpboot/carlos/ppc on / failed:
Protocol not supported

Do you know what I'm doing wrong ?

Thanks,

Carlos