strange results in a2dp alsa plugin

Marcel

I am getting some really strange stuff happening in my attempt to do an a2dp alsa plugin. About 90% of the time, the l2cap connection fails... but then if it does work, I get a segfault inside the sbc library. When I put a printf inside the library to figure out what was happening, the segfault went away (but still no audio)! argh.

Would you have a look? Can you make sure rfcomm transport didn't get broken?

I'm basing my effort on your bluez/utils/alsa in the bluez cvs. My diffs against it are in:

http://bluetooth-alsa.sourceforge.net/avdtp.patch

I have made it default to a2dp but the rfcomm transport should work if you have "use_rfcomm" as a true boolean option inside .asoundrc

My .asoundrc:

pcm.headphone {
        type a2dp
        bdaddr "00:0D:3C:30:32:AD"
}

invoked as:

aplay -B 1000000 -D pcm.headphone /usr/share/sounds/linphone/rings/rock.wav

(fwiw, /usr/share/sounds/linphone/rings/rock.wav is reported as signed 16 bit Little Endian, Rate 44100 Hz, Stereo)

Thanks

-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc. Get Certified Today Register for a JBoss Training Course. Free Certification Exam for All Training Attendees Through End of 2005. For more info visit:
http://ads.osdn.com/?ad_id=7628&alloc_id=16845&op=click
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel