Does Linux support powering down SATA drives?
Trying to save power consumption. I have a backup drive that is used only once a day to back up the main drive. So - why should I run it more that 10 minutes a day? What I'd like to do is keep it in an off state and then at night power it on, mount it up, do the backup, unmount it, and shut it down. Can I do that?
Quoted 5 lines · Marc Perkel
Trying to save power consumption. I have a backup drive that is used only once a day to back up the main drive. So - why should I run it more that 10 minutes a day? What I'd like to do is keep it in an off state and then at night power it on, mount it up, do the backup, unmount it, and shut it down. Can I do that?
SATA not yet, USB you could however.
Quoted 8 lines · Alan Cox
Quoted 5 lines · Marc Perkel
Trying to save power consumption. I have a backup drive that is used only once a day to back up the main drive. So - why should I run it more that 10 minutes a day? What I'd like to do is keep it in an off state and then at night power it on, mount it up, do the backup, unmount it, and shut it down. Can I do that?
SATA not yet, USB you could however.
Or PATA, of course. I switch off two of my HDs 4 minutes after last use with the commands:
hdparm -S 48 /dev/hde
hdparm -S 48 /dev/hdg
Isn't there a passthru patch in the works to let commands, such as the one required for suspend, through to a SATA device?
Signature · 6 lines
Cheers, Alistair. 'No sense being pessimistic, it probably wouldn't work anyway.' Third year Computer Science undergraduate. 1F2 55 South Clerk Street, Edinburgh, UK.
Quoted 17 lines · Alistair John Strachan
Quoted 13 lines · Alan Cox
Quoted 7 lines · Marc Perkel
Trying to save power consumption. I have a backup drive that is used only once a day to back up the main drive. So - why should I run it more that 10 minutes a day? What I'd like to do is keep it in an off state and then at night power it on, mount it up, do the backup, unmount it, and shut it down. Can I do that?
SATA not yet, USB you could however.
Quoted 9 lines
Or PATA, of course. I switch off two of my HDs 4 minutes after last use with the commands:
hdparm -S 48
/dev/hde
hdparm -S 48/dev/hdgIsn't there a passthru patch in the works to let commands, such as the one required for suspend, through to a SATA device?
So - why isn't there more SATA support. Seems like this and SMART aren't supported. What's up with that? Why is SATA harder than IDE?
Signature · 4 lines
Marc Perkel - [email protected] Spam Filter: http://www.junkemailfilter.com My Blog: http://marc.perkel.com
USB storage -> Oops (2.6.14.2)
Hello list,
I have pugged in two USB storage.
1. WD 200GB
Nov 19 19:23:57 192.168.2.50 SCSI device sda: 268435455 512-byte hdwr
sectors (137439 MB)
(128GB???)
2. Maxtor 40GB
Nov 19 19:24:02 192.168.2.50 SCSI device sdb: 80293248 512-byte hdwr sectors
(41110 MB)
The full log is here:
(Syslog+netconsole)
Nov 19 19:23:51 192.168.2.50 kernel: usb 1-3: new high speed USB device using ehci_hcd and address 2 Nov 19 19:23:51 192.168.2.50 kernel: scsi0 : SCSI emulation for USB Mass Storage devices Nov 19 19:23:56 192.168.2.50 Vendor: Nov 19 19:23:56 192.168.2.50 U Nov 19 19:23:56 192.168.2.50 S Nov 19 19:23:56 192.168.2.50 B Nov 19 19:23:56 192.168.2.50 Nov 19 19:23:56 192.168.2.50 2 Nov 19 19:23:56 192.168.2.50 . Nov 19 19:23:56 192.168.2.50 0 Nov 19 19:23:56 192.168.2.50 Nov 19 19:23:56 192.168.2.50 Model: Nov 19 19:23:56 192.168.2.50 S Nov 19 19:23:56 192.168.2.50 t Nov 19 19:23:56 192.168.2.50 o Nov 19 19:23:56 192.168.2.50 r Nov 19 19:23:56 192.168.2.50 a Nov 19 19:23:56 192.168.2.50 g Nov 19 19:23:56 192.168.2.50 e Nov 19 19:23:56 192.168.2.50 Nov 19 19:23:56 192.168.2.50 D Nov 19 19:23:56 192.168.2.50 e Nov 19 19:23:56 192.168.2.50 v Nov 19 19:23:56 192.168.2.50 i Nov 19 19:23:56 192.168.2.50 c Nov 19 19:23:56 192.168.2.50 e Nov 19 19:23:56 192.168.2.50 Nov 19 19:23:56 192.168.2.50 Nov 19 19:23:56 192.168.2.50 Rev: Nov 19 19:23:56 192.168.2.50 0 Nov 19 19:23:56 192.168.2.50 1 Nov 19 19:23:56 192.168.2.50 0 Nov 19 19:23:56 192.168.2.50 0 Nov 19 19:23:56 192.168.2.50 Nov 19 19:23:56 192.168.2.50 Type: Direct-Access Nov 19 19:23:57 192.168.2.50 ANSI SCSI revision: 00 Nov 19 19:23:57 192.168.2.50 Nov 19 19:23:57 192.168.2.50 kernel: Vendor: USB 2.0 Model: Storage Device Rev: 0100 Nov 19 19:23:57 192.168.2.50 kernel: Type: Direct-Access ANSI SCSI revision: 00 Nov 19 19:23:57 192.168.2.50 SCSI device sda: 268435455 512-byte hdwr sectors (137439 MB) Nov 19 19:23:57 192.168.2.50 sda: assuming drive cache: write through Nov 19 19:23:57 192.168.2.50 kernel: SCSI device sda: 268435455 512-byte hdwr sectors (137439 MB) Nov 19 19:23:57 192.168.2.50 kernel: sda: assuming drive cache: write through Nov 19 19:23:57 192.168.2.50 SCSI device sda: 268435455 512-byte hdwr sectors (137439 MB) Nov 19 19:23:57 192.168.2.50 sda: assuming drive cache: write through Nov 19 19:23:57 192.168.2.50 kernel: SCSI device sda: 268435455 512-byte hdwr sectors (137439 MB) Nov 19 19:23:57 192.168.2.50 kernel: sda: assuming drive cache: write through Nov 19 19:23:57 192.168.2.50 kernel: sda: sda1 sda2 Nov 19 19:23:57 192.168.2.50 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Nov 19 19:23:57 192.168.2.50 kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Nov 19 19:23:57 192.168.2.50 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Nov 19 19:23:57 192.168.2.50 kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Nov 19 19:23:57 192.168.2.50 kernel: usb 1-1: new high speed USB device using ehci_hcd and address 3 Nov 19 19:23:57 192.168.2.50 kernel: scsi1 : SCSI emulation for USB Mass Storage devices Nov 19 19:24:02 192.168.2.50 Vendor: Nov 19 19:24:02 192.168.2.50 U Nov 19 19:24:02 192.168.2.50 S Nov 19 19:24:02 192.168.2.50 B Nov 19 19:24:02 192.168.2.50 Nov 19 19:24:02 192.168.2.50 2 Nov 19 19:24:02 192.168.2.50 . Nov 19 19:24:02 192.168.2.50 0 Nov 19 19:24:02 192.168.2.50 Nov 19 19:24:02 192.168.2.50 Model: Nov 19 19:24:02 192.168.2.50 S Nov 19 19:24:02 192.168.2.50 t Nov 19 19:24:02 192.168.2.50 o Nov 19 19:24:02 192.168.2.50 r Nov 19 19:24:02 192.168.2.50 a Nov 19 19:24:02 192.168.2.50 g Nov 19 19:24:02 192.168.2.50 e Nov 19 19:24:02 192.168.2.50 Nov 19 19:24:02 192.168.2.50 D Nov 19 19:24:02 192.168.2.50 e Nov 19 19:24:02 192.168.2.50 v Nov 19 19:24:02 192.168.2.50 i Nov 19 19:24:02 192.168.2.50 c Nov 19 19:24:02 192.168.2.50 e Nov 19 19:24:02 192.168.2.50 Nov 19 19:24:02 192.168.2.50 Nov 19 19:24:02 192.168.2.50 Rev: Nov 19 19:24:02 192.168.2.50 0 Nov 19 19:24:02 192.168.2.50 1 Nov 19 19:24:02 192.168.2.50 last message repeated 2 times Nov 19 19:24:02 192.168.2.50 Nov 19 19:24:02 192.168.2.50 Type: Direct-Access Nov 19 19:24:02 192.168.2.50 ANSI SCSI revision: 00 Nov 19 19:24:02 192.168.2.50 Nov 19 19:24:02 192.168.2.50 SCSI device sdb: 80293248 512-byte hdwr sectors (41110 MB) Nov 19 19:24:02 192.168.2.50 sdb: assuming drive cache: write through Nov 19 19:24:02 192.168.2.50 SCSI device sdb: 80293247 512-byte hdwr sectors (41110 MB) Nov 19 19:24:02 192.168.2.50 sdb: assuming drive cache: write through Nov 19 19:24:02 192.168.2.50 kernel: Vendor: USB 2.0 Model: Storage Device Rev: 0111 Nov 19 19:24:02 192.168.2.50 kernel: Type: Direct-Access ANSI SCSI revision: 00 Nov 19 19:24:02 192.168.2.50 kernel: SCSI device sdb: 80293248 512-byte hdwr sectors (41110 MB) Nov 19 19:24:02 192.168.2.50 kernel: sdb: assuming drive cache: write through Nov 19 19:24:02 192.168.2.50 kernel: SCSI device sdb: 80293247 512-byte hdwr sectors (41110 MB) Nov 19 19:24:02 192.168.2.50 kernel: sdb: assuming drive cache: write through Nov 19 19:24:02 192.168.2.50 kernel: sdb: sdb1 Nov 19 19:24:02 192.168.2.50 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 Nov 19 19:24:02 192.168.2.50 kernel: Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 Nov 19 19:24:02 192.168.2.50 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 Nov 19 19:24:02 192.168.2.50 kernel: Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 Nov 19 19:24:02 192.168.2.50 Unable to handle kernel NULL pointer dereference Nov 19 19:24:02 192.168.2.50 at virtual address 00000000 Nov 19 19:24:02 192.168.2.50 printing eip: Nov 19 19:24:02 192.168.2.50 c03df86c Nov 19 19:24:02 192.168.2.50 *pde = 006d1001 Nov 19 19:24:02 192.168.2.50 Oops: 0000 [#1] Nov 19 19:24:02 192.168.2.50 SMP Nov 19 19:24:02 192.168.2.50 Nov 19 19:24:02 192.168.2.50 Modules linked in: Nov 19 19:24:02 192.168.2.50 netconsole Nov 19 19:24:02 192.168.2.50 Nov 19 19:24:02 192.168.2.50 CPU: 3 Nov 19 19:24:02 192.168.2.50 EIP: 0060:[<c03df86c>] Not tainted VLI Nov 19 19:24:02 192.168.2.50 EFLAGS: 00010286 (2.6.14.2) Nov 19 19:24:02 192.168.2.50 EIP is at scsi_run_queue+0x12/0xbc Nov 19 19:24:02 192.168.2.50 eax: 00000000 ebx: db480ca4 ecx: 00000001 edx: db480ca4 Nov 19 19:24:02 192.168.2.50 esi: f49bdb00 edi: 00000246 ebp: c35bfe88 esp: c35bfe74 Nov 19 19:24:02 192.168.2.50 ds: 007b es: 007b ss: 0068 Nov 19 19:24:02 192.168.2.50 Process ksoftirqd/3 (pid: 12, threadinfo=c35be000 task=c3550030) Nov 19 19:24:02 192.168.2.50 Nov 19 19:24:02 192.168.2.50 Stack: Nov 19 19:24:02 192.168.2.50 00000060 Nov 19 19:24:02 192.168.2.50 00000282 Nov 19 19:24:02 192.168.2.50 db480ca4 Nov 19 19:24:02 192.168.2.50 f49bdb00 Nov 19 19:24:02 192.168.2.50 00000246 Nov 19 19:24:02 192.168.2.50 c35bfe98 Nov 19 19:24:02 192.168.2.50 c03df989 Nov 19 19:24:03 192.168.2.50 db480ca4 Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 e6ba79dc Nov 19 19:24:03 192.168.2.50 c35bfebc Nov 19 19:24:03 192.168.2.50 c03dfa7e Nov 19 19:24:03 192.168.2.50 f49bdb00 Nov 19 19:24:03 192.168.2.50 00000000 Nov 19 19:24:03 192.168.2.50 00000024 Nov 19 19:24:03 192.168.2.50 db480ca4 Nov 19 19:24:03 192.168.2.50 f49bdb00 Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 00040000 Nov 19 19:24:03 192.168.2.50 e6ba79dc Nov 19 19:24:03 192.168.2.50 c35bff08 Nov 19 19:24:03 192.168.2.50 c03dff01 Nov 19 19:24:03 192.168.2.50 f49bdb00 Nov 19 19:24:03 192.168.2.50 00000000 Nov 19 19:24:03 192.168.2.50 00000024 Nov 19 19:24:03 192.168.2.50 00000001 Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 Call Trace: Nov 19 19:24:03 192.168.2.50 [<c0103bf2>] Nov 19 19:24:03 192.168.2.50 show_stack+0x9a/0xd0 Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 [<c0103db2>] Nov 19 19:24:03 192.168.2.50 show_registers+0x16a/0x1fa Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 [<c0103fc3>] Nov 19 19:24:03 192.168.2.50 die+0xfa/0x17c Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 [<c05557bc>] Nov 19 19:24:03 192.168.2.50 do_page_fault+0x37c/0x6da Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 [<c01038ab>] Nov 19 19:24:03 192.168.2.50 error_code+0x4f/0x54 Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 [<c03df989>] Nov 19 19:24:03 192.168.2.50 scsi_next_command+0x20/0x26 Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 [<c03dfa7e>] Nov 19 19:24:03 192.168.2.50 scsi_end_request+0xb6/0xf9 Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 [<c03dff01>] Nov 19 19:24:03 192.168.2.50 scsi_io_completion+0x2c0/0x4ef Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 [<c03e0398>] Nov 19 19:24:03 192.168.2.50 scsi_generic_done+0x3b/0x47 Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 [<c03db491>] Nov 19 19:24:03 192.168.2.50 scsi_finish_command+0x83/0x97 Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 [<c03db359>] Nov 19 19:24:03 192.168.2.50 scsi_softirq+0xb8/0x134 Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 [<c0123ec2>] Nov 19 19:24:03 192.168.2.50 __do_softirq+0x72/0xdc Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 [<c0123f63>] Nov 19 19:24:03 192.168.2.50 do_softirq+0x37/0x39 Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 [<c012447c>] Nov 19 19:24:03 192.168.2.50 ksoftirqd+0xa5/0xfa Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 [<c01330d7>] Nov 19 19:24:03 192.168.2.50 kthread+0xb1/0xb5 Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 [<c0101145>] Nov 19 19:24:03 192.168.2.50 kernel_thread_helper+0x5/0xb Nov 19 19:24:03 192.168.2.50 Nov 19 19:24:03 192.168.2.50 Code: Nov 19 19:24:03 192.168.2.50 ff Nov 19 19:24:03 192.168.2.50 8b Nov 19 19:24:03 192.168.2.50 4d Nov 19 19:24:03 192.168.2.50 ec Nov 19 19:24:03 192.168.2.50 8b Nov 19 19:24:03 192.168.2.50 41 Nov 19 19:24:03 192.168.2.50 2c Nov 19 19:24:03 192.168.2.50 e8 Nov 19 19:24:03 192.168.2.50 bd Nov 19 19:24:03 192.168.2.50 55 Nov 19 19:24:03 192.168.2.50 17 Nov 19 19:24:03 192.168.2.50 00 Nov 19 19:24:03 192.168.2.50 89 Nov 19 19:24:03 192.168.2.50 45 Nov 19 19:24:03 192.168.2.50 f0 Nov 19 19:24:03 192.168.2.50 89 Nov 19 19:24:03 192.168.2.50 1c Nov 19 19:24:03 192.168.2.50 24 Nov 19 19:24:03 192.168.2.50 e8 Nov 19 19:24:03 192.168.2.50 51 Nov 19 19:24:03 192.168.2.50 be Nov 19 19:24:03 192.168.2.50 ff Nov 19 19:24:03 192.168.2.50 ff Nov 19 19:24:03 192.168.2.50 eb Nov 19 19:24:03 192.168.2.50 ad Nov 19 19:24:03 192.168.2.50 55 Nov 19 19:24:03 192.168.2.50 89 Nov 19 19:24:03 192.168.2.50 e5 Nov 19 19:24:03 192.168.2.50 57 Nov 19 19:24:03 192.168.2.50 56 Nov 19 19:24:03 192.168.2.50 53 Nov 19 19:24:03 192.168.2.50 83 Nov 19 19:24:03 192.168.2.50 ec Nov 19 19:24:03 192.168.2.50 08 Nov 19 19:24:03 192.168.2.50 8b Nov 19 19:24:03 192.168.2.50 55 Nov 19 19:24:03 192.168.2.50 08 Nov 19 19:24:03 192.168.2.50 8b Nov 19 19:24:03 192.168.2.50 82 Nov 19 19:24:03 192.168.2.50 ec Nov 19 19:24:03 192.168.2.50 00 Nov 19 19:24:03 192.168.2.50 last message repeated 2 times Nov 19 19:24:03 192.168.2.50 b> Nov 19 19:24:03 192.168.2.50 38 Nov 19 19:24:03 192.168.2.50 80 Nov 19 19:24:03 192.168.2.50 b8 Nov 19 19:24:03 192.168.2.50 79 Nov 19 19:24:03 192.168.2.50 01 Nov 19 19:24:03 192.168.2.50 00 Nov 19 19:24:04 192.168.2.50 last message repeated 2 times Nov 19 19:24:04 192.168.2.50 0f Nov 19 19:24:04 192.168.2.50 88 Nov 19 19:24:04 192.168.2.50 8e Nov 19 19:24:04 192.168.2.50 00 Nov 19 19:24:04 192.168.2.50 last message repeated 2 times Nov 19 19:24:04 192.168.2.50 8b Nov 19 19:24:04 192.168.2.50 47 Nov 19 19:24:04 192.168.2.50 2c Nov 19 19:24:04 192.168.2.50 e8 Nov 19 19:24:04 192.168.2.50 87 Nov 19 19:24:04 192.168.2.50 55 Nov 19 19:24:04 192.168.2.50 Nov 19 19:24:04 192.168.2.50 Nov 19 19:24:04 192.168.2.50 kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 Nov 19 19:24:04 192.168.2.50 kernel: printing eip: Nov 19 19:24:04 192.168.2.50 kernel: c03df86c Nov 19 19:24:04 192.168.2.50 kernel: *pde = 006d1001 Nov 19 19:24:04 192.168.2.50 kernel: Oops: 0000 [#1] Nov 19 19:24:04 192.168.2.50 kernel: SMP Nov 19 19:24:04 192.168.2.50 kernel: Modules linked in: netconsole Nov 19 19:24:04 192.168.2.50 kernel: CPU: 3 Nov 19 19:24:04 192.168.2.50 Kernel panic - not syncing: Fatal exception in interrupt Nov 19 19:24:04 192.168.2.50 kernel: EIP: 0060:[<c03df86c>] Not tainted VLI Nov 19 19:24:04 192.168.2.50 Nov 19 19:24:04 192.168.2.50 Rebooting in 5 seconds..
Thanks
Janos
Quoted 1 line · Marc Perkel
So - why isn't there more SATA support. Seems like this and SMART aren't supported. What's up with that? Why is SATA harder than IDE?
I think it's a case of "newer" rather than "harder" (but that doesn't make it less frustrating).
--
Jeff Woods <[email protected]>
Quoted 10 lines · Alistair John Strachan
Quoted 1 line
SATA not yet, USB you could however.
Or PATA, of course. I switch off two of my HDs 4 minutes after last use with the commands:
hdparm -S 48
/dev/hde
hdparm -S 48/dev/hdgIsn't there a passthru patch in the works to let commands, such as the one required for suspend, through to a SATA device?
The latest kernels support command passthrough for SMART and the like but hdparm -S does not "switch off" anything. It may spin a drive down but the power consumption of 23 hours a day of "spun down" is significant, probably more than the hour it is powered up.
Same as the problem with many household devices in standby that actually end up using as lot of power in their many "turned off" hours
Quoted 9 lines · Alan Cox
Quoted 8 lines · Alistair John Strachan
Quoted 1 line
SATA not yet, USB you could however.
Or PATA, of course. I switch off two of my HDs 4 minutes after last use with the commands:
hdparm -S 48
/dev/hde
hdparm -S 48/dev/hdg
Quoted 7 lines
Quoted 2 lines
Isn't there a passthru patch in the works to let commands, such as the one required for suspend, through to a SATA device?
The latest kernels support command passthrough for SMART and the like but hdparm -S does not "switch off" anything. It may spin a drive down but the power consumption of 23 hours a day of "spun down" is significant, probably more than the hour it is powered up.
Interesting.
Quoted 2 lines
Same as the problem with many household devices in standby that actually end up using as lot of power in their many "turned off" hours
My mistake, I was unaware of the difference between "Suspend" and (presumably) "Sleep". I've tried the latter without success on a Maxtor 120G here, does this work for anybody else (hdparm -Y)?
Signature · 6 lines
Cheers, Alistair. 'No sense being pessimistic, it probably wouldn't work anyway.' Third year Computer Science undergraduate. 1F2 55 South Clerk Street, Edinburgh, UK.
Quoted 1 line · Alistair John Strachan
My mistake, I was unaware of the difference between "Suspend" and (presumably) "Sleep". I've tried the latter without success on a Maxtor 120G here, does this work for anybody else (hdparm -Y)?
I've tried hdparm -Y - only once - the drive went to sleep mode and did not came back, I had to use reset button.
Signature · 1 line
Ondrej Zary
Quoted 6 lines · Alistair John Strachan
Quoted 2 lines
Same as the problem with many household devices in standby that actually end up using as lot of power in their many "turned off" hours
My mistake, I was unaware of the difference between "Suspend" and (presumably) "Sleep". I've tried the latter without success on a Maxtor 120G here, does this work for anybody else (hdparm -Y)?
The power consumption situation is as true for suspend as sleep. Only pulling the plug makes that difference. At the moment the SATA layer doesn't support hot unplugging the drive which is what is really needed.
Quoted 15 lines · Alan Cox
Quoted 11 lines · Alistair John Strachan
Quoted 3 lines
SATA not yet, USB you could however.
Or PATA, of course. I switch off two of my HDs 4 minutes after last use with the commands:
hdparm -S 48
/dev/hde
hdparm -S 48/dev/hdgIsn't there a passthru patch in the works to let commands, such as the one required for suspend, through to a SATA device?
Quoted 9 lines
The latest kernels support command passthrough for SMART and the like but hdparm -S does not "switch off" anything. It may spin a drive down but the power consumption of 23 hours a day of "spun down" is significant, probably more than the hour it is powered up.
Same as the problem with many household devices in standby that actually end up using as lot of power in their many "turned off" hours
I didn't actually mean totally power off. Spin down would be fine with me. Just seems like a waste to run a drive for 24 hours that is used only for 10 minutes. That drive is there so if the main drive blows I can run down to the datacenter and move one cable and be back up again.
You know what's interesting is that I read somewhere that computers use as much power as 4 hoover dams can generate. And since a lit of these computer are running Linux just a few lines of code can create enough energy savings to perhaps power a small city. Kind of amazing when you think about it.
SATA isn't really "new" any more. I personally consider IDE to be obsolete. Seems to me that Linux should fully support SATA to the same level as IDE drives. And I'm saying that as someone who doesn't have to actually code it. But I will leave messages of praise and thanks in this mailing list if you all catch up.
On Saturday 19 November 2005 21:20, Marc Perkel wrote:
[snip]
Quoted 6 lines
SATA isn't really "new" any more. I personally consider IDE to be obsolete. Seems to me that Linux should fully support SATA to the same level as IDE drives. And I'm saying that as someone who doesn't have to actually code it. But I will leave messages of praise and thanks in this mailing list if you all catch up.
As Alan mentions in another thread, what is needed is true hotplug support, which is difficult with some controllers for which we have poor (or no) documentation. I wouldn't hold your breath.
As for pass-thru standby/sleep commands, as long as the pass-thru patch got into mainline, try a very recent version of hdparm which should understand sending the ATA commands over SCSI (libata).
Signature · 6 lines
Cheers, Alistair. 'No sense being pessimistic, it probably wouldn't work anyway.' Third year Computer Science undergraduate. 1F2 55 South Clerk Street, Edinburgh, UK.
Quoted 2 lines · Marc Perkel
Trying to save power consumption. I have a backup drive that is used only once a day to back up the main drive. So - why should I run it more that 10 minutes a day? What I'd like to do is keep it in an off state and then at night power it on, mount it up, do the backup, unmount it, and shut it down. Can I do that?
Support is being added soon, I think the latest 2.6.15-rc1 supports passthru. I had to install an extra patch due to a bug where it used the same IDE device irrespective of one asking for /dev/sda or /dev/sdb I think the fix will be in rc2.
hdparm -S60 works fine for me. It spins down, and therefore stay nices a cool.
hdparm -y should work, and is like an immeadiate -S
hdparm -Y is kind of dangerous at the moment. It powers down the drive, but will not come back unless the entire IDE bus goes through a reset. The feature to support that is called hotplug, but that is not implemented yet for SATA. So, basically, if you do hdparm -Y, you won't be able to wake it up again at the moment. At least hdparm -S60 is a start towards what you want.
James
Quoted 4 lines · Alan Cox
Quoted 1 line · Marc Perkel
Trying to save power consumption.
SATA not yet, USB you could however.
And what about Firewire? I see that MacOS X automatically spins down the drive when I unmount it from a Mac.
Would it be possible to have this feature available for userspace (where I would think would be the proper place for the policy controlling this thing)?
Thanks for any comments, Rogério Brito.
Signature · 3 lines
Rogério Brito : [email protected] : http://www.ime.usp.br/~rbrito Homepage of the algorithms package : http://algorithms.berlios.de Homepage on freshmeat: http://freshmeat.net/projects/algorithms/
Quoted 3 lines · Alan Cox
It may spin a drive down but the power consumption of 23 hours a day of "spun down" is significant, probably more than the hour it is powered up.
Of course, so obvious now that you point it out.
Thanks, Rogério Brito.
Signature · 3 lines
Rogério Brito : [email protected] : http://www.ime.usp.br/~rbrito Homepage of the algorithms package : http://algorithms.berlios.de Homepage on freshmeat: http://freshmeat.net/projects/algorithms/
resyncing broken software raid 1
OK - I must be blind but what do you do in FC4 to resync a borken raid 1 array? It's software raid. I thought it was raidhotadd but can't get that to work.
What am I missig?
Re: resyncing broken software raid 1
Quoted 2 lines · Marc Perkel
OK - I must be blind but what do you do in FC4 to resync a borken raid 1 array? It's software raid. I thought it was raidhotadd but can't get that to work.
Please create a new thread (instead of responding to a message in an existing thread) when you want to discuss a new topic.
See "man mdadm" for more info, raidtools have been deprecated for a long time.
Cheers,
Kyle Moffett
I would agree with your view on IDE becoming obsolete on hard drives, but I as yet, am not aware of any CD/DVD drives with a SATA interface.
Quoted 18 lines · Alistair John Strachan
On Saturday 19 November 2005 21:20, Marc Perkel wrote:
[snip]Quoted 6 lines
SATA isn't really "new" any more. I personally consider IDE to be obsolete. Seems to me that Linux should fully support SATA to the same level as IDE drives. And I'm saying that as someone who doesn't have to actually code it. But I will leave messages of praise and thanks in this mailing list if you all catch up.
As Alan mentions in another thread, what is needed is true hotplug support, which is difficult with some controllers for which we have poor (or no) documentation. I wouldn't hold your breath.
As for pass-thru standby/sleep commands, as long as the pass-thru patch got into mainline, try a very recent version of hdparm which should understand sending the ATA commands over SCSI (libata).
Quoted 2 lines · [email protected] wrote:
I would agree with your view on IDE becoming obsolete on hard drives, but I as yet, am not aware of any CD/DVD drives with a SATA interface.
That's something that amazes me - why aren't there anu SATA CD/DVD drives? Seems to me that CD/DVD could have the same benifits of using a thin cable and eventually getting away from the IDE interface. Or - since there are usually plenty of USB 2 ports, why not have a CD/DVD that internally connect to USB?
Another thing I've wondered about was why not build a 3 1/2 inch CD/DVD drive? There are plenty of the small disks available. Seems like a logical product to develop.
Quoted 11 lines · Marc Perkel
Quoted 3 lines · [email protected] wrote:
I would agree with your view on IDE becoming obsolete on hard drives, but I as yet, am not aware of any CD/DVD drives with a SATA interface.
That's something that amazes me - why aren't there anu SATA CD/DVD drives? Seems to me that CD/DVD could have the same benifits of using a thin cable and eventually getting away from the IDE interface.
You can rip one from an Xbox 360 :)
Signature · 2 lines
Tomasz Torcz Morality must always be based on practicality. [email protected] -- Baron Vladimir Harkonnen
Quoted 11 lines · Tomasz Torcz
Quoted 8 lines · Marc Perkel
Quoted 4 lines · [email protected] wrote:
I would agree with your view on IDE becoming obsolete on hard drives, but I as yet, am not aware of any CD/DVD drives with a SATA interface.
Quoted 8 lines
Quoted 3 lines
That's something that amazes me - why aren't there anu SATA CD/DVD drives? Seems to me that CD/DVD could have the same benifits of using a thin cable and eventually getting away from the IDE interface.
You can rip one from an Xbox 360 :)
Oh? What does the Xbox have in it?
Signature · 4 lines
Marc Perkel - [email protected] Spam Filter: http://www.junkemailfilter.com My Blog: http://marc.perkel.com
Quoted 3 lines · On Sunday 20 November 2005 07:22, [email protected] wrote:
I would agree with your view on IDE becoming obsolete on hard drives, but I as yet, am not aware of any CD/DVD drives with a SATA interface.
Pioneer make a SATA DVD writer.
Signature · 6 lines
Cheers, Alistair. 'No sense being pessimistic, it probably wouldn't work anyway.' Third year Computer Science undergraduate. 1F2 55 South Clerk Street, Edinburgh, UK.
Quoted 16 lines · Marc Perkel
Quoted 14 lines · Tomasz Torcz
Quoted 10 lines · Marc Perkel
Quoted 3 lines · [email protected] wrote:
I would agree with your view on IDE becoming obsolete on hard drives, but I as yet, am not aware of any CD/DVD drives with a SATA interface.
That's something that amazes me - why aren't there anu SATA CD/DVD drives? Seems to me that CD/DVD could have the same benifits of using a thin cable and eventually getting away from the IDE interface.
Quoted 4 lines
Quoted 2 lines
You can rip one from an Xbox 360 :)
Oh? What does the Xbox have in it?
Xbox *360* - http://www.anandtech.com/systems/showdoc.aspx?i=2610&p=4
Very thin on details, unfortunately.
Signature · 2 lines
Tomasz Torcz Morality must always be based on practicality. [email protected] -- Baron Vladimir Harkonnen
Quoted 9 lines · Alan Cox
Quoted 8 lines · Alistair John Strachan
Quoted 1 line
SATA not yet, USB you could however.
Or PATA, of course. I switch off two of my HDs 4 minutes after last use with the commands:
hdparm -S 48
/dev/hde
hdparm -S 48/dev/hdg
Quoted 7 lines
Quoted 2 lines
Isn't there a passthru patch in the works to let commands, such as the one required for suspend, through to a SATA device?
The latest kernels support command passthrough for SMART and the like but hdparm -S does not "switch off" anything. It may spin a drive down but the power consumption of 23 hours a day of "spun down" is significant, probably more than the hour it is powered up.
Really? Harddrive does not contain AC/DC converters, so situation should be slightly better there, no?
Pavel
Signature · 1 line
64 bytes from 195.113.31.123: icmp_seq=28 ttl=51 time=448769.1 ms
Re: resyncing broken software raid 1
In reply to Kyle MoffettQuoted 9 lines · Kyle Moffett
Quoted 4 lines · Marc Perkel
OK - I must be blind but what do you do in FC4 to resync a borken raid 1 array? It's software raid. I thought it was raidhotadd but can't get that to work.
Please create a new thread (instead of responding to a message in an existing thread) when you want to discuss a new topic.
And even better, ask in a forum appropriate to your question. Unfortunately some people have a bad habbit of posting completely off topic questions on lkml.
Signature · 1 line
Jens Axboe
Quoted 9 lines · Pavel Machek
Quoted 4 lines · Alan Cox
The latest kernels support command passthrough for SMART and the like but hdparm -S does not "switch off" anything. It may spin a drive down but the power consumption of 23 hours a day of "spun down" is significant, probably more than the hour it is powered up.
Really? Harddrive does not contain AC/DC converters, so situation should be slightly better there, no?
it is 7.5W vs. 0.9W (idle vs standby or sleep) on a Barracuda 120GB 7200rpm desktop drive. Notebook drives are doing better:
0.65W vs 0.25W (idle vs standby) or
0.65W vs 0.1W (idle vs sleep) on some Hitachi Travelstar.
Better than nothing, but pulling the plug is even better :-)
Signature · 3 lines
Stefan Seyfried \ "I didn't want to write for pay. I QA / R&D Team Mobile Devices \ wanted to be paid for what I write." SUSE LINUX Products GmbH, Nürnberg \ -- Leonard Cohen
Yes, the hdparm -y, -Y, and -S flags all work with the passthru feature set, which is included in the 2.6.15-rc* kernels.
Typical power consumption figures, from WDC SataII drives:
Idle: 430mA@12VDC + 730mA@5VDC (about 8.75 watts) Standby: 20mA@12VDC + 270mA@5VDC (about 1.60 watts) Sleep: 20mA@12VDC + 250mA@5VDC (about 1.50 watts)
Those are from the WDC datasheets.
Cheers
Quoted 5 lines · Mark Lord
Yes, the hdparm -y, -Y, and -S flags all work with the passthru feature set, which is included in the 2.6.15-rc* kernels.
Typical power consumption figures, from WDC SataII drives:
Quoted 7 lines
Idle: 430mA@12VDC + 730mA@5VDC (about 8.75 watts) Standby: 20mA@12VDC + 270mA@5VDC (about 1.60 watts) Sleep: 20mA@12VDC + 250mA@5VDC (about 1.50 watts)Those are from the WDC datasheets.
Cheers
Here's maxotor specs
Power
Spinup (avg, watts) 28.7
Seek (avg, watts) 12.3
Idle (avg, watts) 7.0
Standby (avg, watts) 2.1
Signature · 4 lines
Marc Perkel - [email protected] Spam Filter: http://www.junkemailfilter.com My Blog: http://marc.perkel.com
Quoted 2 lines · On Sunday 20 November 2005 01:22, [email protected] wrote:
I would agree with your view on IDE becoming obsolete on hard drives, but I as yet, am not aware of any CD/DVD drives with a SATA interface.
Laptops?
Rob
Quoted 5 lines · Rob Landley
Quoted 2 lines · On Sunday 20 November 2005 01:22, [email protected] wrote:
I would agree with your view on IDE becoming obsolete on hard drives, but I as yet, am not aware of any CD/DVD drives with a SATA interface.
Laptops?
Laptops will likely get S/ATAPI later rather than sooner.
But there are definitely S/ATAPI devices out there. Most are first generation, which means they are PATA devices with a SATA bridge (thus they appear to the end user to be SATA).
Jeff
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"a" == asmith <[email protected]> writes:
a> I would agree with your view on IDE becoming obsolete on hard a> drives, but I as yet, am not aware of any CD/DVD drives with a SATA a> interface.
The Plextor PX-716SA is pretty common and very nice; I have one in a (Windows) gaming box I put together about six months ago.
- J<
Quoted 8 lines · Jeff Garzik
Quoted 5 lines · Rob Landley
Quoted 2 lines · On Sunday 20 November 2005 01:22, [email protected] wrote:
I would agree with your view on IDE becoming obsolete on hard drives, but I as yet, am not aware of any CD/DVD drives with a SATA interface.
Laptops?
Laptops will likely get S/ATAPI later rather than sooner.
Sorry, I meant IDE isn't becoming obsolete on laptops just yet.
Eventually, sure...
Rob