psmouse.c in Kernel fails but succeeds as Module
Was using 2.6.11.4 and the GlidePoint worked there just fine
In 2.6.14.2 the Alps GlidePoint Mouse stopped being detected when I compile Kernel with
CONFIG_MOUSE_PS2=y
After boot up
cat of /proc/bus/input/devices displays:
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
H: Handlers=kbd event0
B: EV=40001
B: SND=6
I: Bus=0011 Vendor=0001 Product=0001 Version=abba
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event1
B: EV=120013
B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7
I: Bus=0003 Vendor=045e Product=0040 Version=0300
N: Name="Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)"
P: Phys=usb-0000:00:13.0-1/input0
H: Handlers=mouse0 event2
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
However, when I compile Kernel with
CONFIG_MOUSE_PS2=m
and after boot up execute
modprobe psmouse
manually
the Alps GlidePoint is detected thus
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
H: Handlers=kbd event0
B: EV=40001
B: SND=6
I: Bus=0011 Vendor=0001 Product=0001 Version=abba
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event1
B: EV=120013
B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7
I: Bus=0003 Vendor=045e Product=0040 Version=0300
N: Name="Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)"
P: Phys=usb-0000:00:13.0-1/input0
H: Handlers=mouse0 event2
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
I: Bus=0011 Vendor=0002 Product=0008 Version=0000
N: Name="PS/2 Mouse"
P: Phys=isa0060/serio1/input1
H: Handlers=mouse1 event3
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
I: Bus=0011 Vendor=0002 Product=0008 Version=7321
N: Name="AlpsPS/2 ALPS GlidePoint"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse2 event4
B: EV=f
B: KEY=420 0 70000 0 0 0 0 0 0 0 0
B: REL=3
B: ABS=1000003
and GlidePoint Works fine in Console Mode and X etc.
I have my work around for the problem, but wondered if someone like Dimitry T. would like me to perform a little debugging and send them the output so others wont have to face this problem.
Yes, the 2.6.11.4 hadCONFIG_MOUSE_PS2=y
I dont take the kernel message feed so please reply to me and I will keep a lookout in LMKL
thanks
jt
Quoted 5 lines · jt
However, when I compile Kernel with
CONFIG_MOUSE_PS2=m
...
Quoted 21 lines
the Alps GlidePoint is detected thus
I: Bus=0011 Vendor=0002 Product=0008 Version=0000
N: Name="PS/2 Mouse"
P: Phys=isa0060/serio1/input1
H: Handlers=mouse1 event3
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3I: Bus=0011 Vendor=0002 Product=0008 Version=7321
N: Name="AlpsPS/2 ALPS GlidePoint"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse2 event4
B: EV=f
B: KEY=420 0 70000 0 0 0 0 0 0 0 0
B: REL=3
B: ABS=1000003
Quoted 2 lines
and GlidePoint Works fine in Console Mode and X etc.
This is most likely USB legacy emulation screws up touchpad detection. If you boot with "usb-handoff" on the kernel command line it shoudl detect ALPS even if psmouse is built-in and not a module.
One of these days we will turn it on by default...
Quoted 5 lines
I have my work around for the problem, but wondered if someone like Dimitry T. would like me to perform a little debugging and send them the output so others wont have to face this problem.
Would be easier if you CC me if you want me to see your message faster ;)
--
Dmitry