Skip to contentSkip to conversation

82xx cascaded timers

DISCUSSION Dmytro Bablinyuk 1 participant 1 message Dec 13, 2005

lore
Share & tools
lore
#0 lore raw

I have the following code:

#define CPMTIMER_TGCR_GM1       0x08  /* gate mode */
#define CPMTIMER_TGCR_FRZ1      0x04  /* freeze timer */
#define CPMTIMER_TGCR_STP1      0x02  /* stop timer */
#define CPMTIMER_TGCR_RST1      0x01  /* restart timer */
#define CPMTIMER_TGCR_CAS2      0x80  /* cascade timer */
#define CPMTIMER_TGCR_FRZ2      0x40  /* freeze timer */
#define CPMTIMER_TGCR_STP2      0x20  /* stop timer */
#define CPMTIMER_TGCR_RST2      0x10  /* restart timer */
#define CPMTIMER_TMR_ORI        0x0010  /* output reference interrupt enable */
#define CPMTIMER_TMR_FRR        0x0008  /* free run/restart */
#define CPMTIMER_TMR_ICLK_INT16 0x0004  /* source internal clock/16 */
#define CPMTIMER_TMR_ICLK_INT   0x0002  /* source internal clock */

-----
[ SCENARIO 1 ]: 16bit Timer1 is triggering interrupt handler (every 2.25microsec no matter what value of cpmt_trr1 is ??? )

   immap->im_cpmtimer.cpmt_tgcr1 &= ~(CPMTIMER_TGCR_CAS2 |
                                      CPMTIMER_TGCR_GM1  |
                                      CPMTIMER_TGCR_RST1 |
                                      CPMTIMER_TGCR_FRZ1 |
                                      CPMTIMER_TGCR_STP1);

immap->im_cpmtimer.cpmt_tmr1 = CPMTIMER_TMR_ORI | CPMTIMER_TMR_FRR
| CPMTIMER_TMR_ICLK_INT16;

   immap->im_cpmtimer.cpmt_trr1 = 10000;
   immap->im_cpmtimer.cpmt_tcr1 = 0;
   immap->im_cpmtimer.cpmt_tcn1 = 0;
   immap->im_cpmtimer.cpmt_ter1 = 0;

request_irq(SIU_INT_TIMER1,

               &timer_handler,
               SA_INTERRUPT,
               "timer_handler",
               NULL);
   /* and start timer1 */
   immap->im_cpmtimer.cpmt_tgcr1 |= CPMTIMER_TGCR_RST1;

-----
[ SCENARIO 2 ]: Cascaded timers: 32bit Timer1 and Timer2 - does not work - interrupt never occurs.

   immap->im_cpmtimer.cpmt_tgcr1 = CPMTIMER_TGCR_CAS2 | CPMTIMER_TGCR_GM1;

   immap->im_cpmtimer.cpmt_trr1 = 10000;
   immap->im_cpmtimer.cpmt_tcr1 = 0;
   immap->im_cpmtimer.cpmt_tcr2 = 0;
   immap->im_cpmtimer.cpmt_tcn1 = 0;
   immap->im_cpmtimer.cpmt_tcn2 = 0;
   immap->im_cpmtimer.cpmt_ter1 = 0;
   immap->im_cpmtimer.cpmt_ter2 = 0;

immap->im_cpmtimer.cpmt_tmr1 = 0; immap->im_cpmtimer.cpmt_tmr2 = CPMTIMER_TMR_ORI | CPMTIMER_TMR_FRR |
CPMTIMER_TMR_ICLK_INT16;

request_irq(SIU_INT_TIMER2,

               &timer_handler,
               SA_INTERRUPT,
               "timer_handler",
               NULL);
   immap->im_cpmtimer.cpmt_tgcr1 |= CPMTIMER_TGCR_RST1;

Does anybody knows what I missed in cascaded timers initialisation (Scenario2) and why when I use 16 bit timer (Scenario1) it always triggers interrupt within 2.25microsec no matter what "trr1" value is?

Thank you very much for any help.