Skip to contentSkip to conversation

HZ manipulation

DISCUSSION Wojciech Kromer 1 participant 2 messages Dec 13, 2005

lore
Share & tools
lore
#0 lore raw

I have 2.4.25 kernel from denx.de and latest uClibc running on mpc8248. I'm trying to change HZ value, but still have strange results with simple test Recompiling whole uClibc does not change the results.

What could be wrong?

with HZ==1000:

# alarm_test                                                                    

alarm fired after 0.099092s slept 0.999769s

with HZ==500:

# alarm_test                                                                    

alarm fired after 0.199622s slept 0.999761s

with HZ==100:

# alarm_test
alarm fired after 0.999693s
slept 0.999760s

- here is procesor id :

... by kernel:

# cat /proc/cpuinfo
processor       : 0
cpu             : 8280
core clock      : 400 MHz
CPM  clock      : 200 MHz
bus  clock      : 100 MHz
revision        : 32.20 (pvr 8082 2014)
bogomips        : 266.24

... and by u-boot:
MPC8248 Reset Status: External Soft, External Hard

MPC8248 Clock Configuration - Bus-to-Core Mult 4x, VCO Div 2, 60x Bus Freq 25-75 , Core Freq 100-300 - dfbrg 1, corecnf 0x1a, busdf 3, cpmdf 1, plldf 0, pllmf 3 - vco_out 400000000, scc_clk 100000000, brg_clk 25000000 - cpu_clk 400000000, cpm_clk 200000000, bus_clk 100000000 - pci_clk 66666666

CPU: MPC8248 (HiP7 Rev 14, Mask 1.0 1K50M) at 400 MHz

- test code included

#include <stdio.h>
#include <signal.h>
#include <unistd.h>
#include <sys/time.h>

static void sighand(int sig)
{
}

int main()
{
struct timeval tv1, tv2;
sigset_t set;

sigfillset(&set);
sigdelset(&set, SIGALRM);
sigdelset(&set, SIGINT);

signal(SIGALRM, sighand);
gettimeofday(&tv1, NULL);

alarm(1);
sigsuspend(&set);
gettimeofday(&tv2, NULL);

tv1.tv_sec = tv2.tv_sec - tv1.tv_sec - (tv2.tv_usec < tv1.tv_usec); tv1.tv_usec = tv2.tv_usec - tv1.tv_usec + (tv2.tv_usec < tv1.tv_usec) * 1000000;

printf("alarm fired after %ld.%06lds\n",tv1.tv_sec, tv1.tv_usec);

//--------------------
gettimeofday(&tv1, NULL);
sleep(1);
gettimeofday(&tv2, NULL);

tv1.tv_sec = tv2.tv_sec - tv1.tv_sec - (tv2.tv_usec < tv1.tv_usec); tv1.tv_usec = tv2.tv_usec - tv1.tv_usec + (tv2.tv_usec < tv1.tv_usec) * 1000000;

printf("slept %ld.%06lds\n",tv1.tv_sec, tv1.tv_usec);

return 0;
}

#1 lore raw

Found it!

Sorry, It was my error.

I have few #ifdef-s to determine HZ value depend on selected board, but in some (for example itimer.c and timer.c) files <linux/config.h> is NOT included before <asm/param.h> is included sowhere in the dark....
So some code was compiled with default value