Skip to contentSkip to conversation

SAMBA Privileges using cupsaddsmb

DISCUSSION Kris Hollingsworth 3 participants 3 messages Dec 15, 2005 – Dec 16, 2005

lore
Share & tools
lore
#0 lore raw

Hey all, I've been banging my head against the wall for the last day or two trying to get this working. I'm trying to get my Ubuntu Linux (Breezy Badger 5.10 release) to serve up print drivers to my windows box when trying to share the printer attached to it.

I think I've got it almost there, I've just run into a problem with permissions on the smbclient commands in the cupsaddsmb.

I've only been using linux for about a week, so any help on this would help me out immensely.

/etc/samba/smb.conf
------------------------------------------
[global]
load printers = yes
printing = cups
printcap name = cups

[printers]
path = /var/spool/samba
browseable = no
public = yes
guest ok = yes
writable = no
printable = yes
printer admin = webster

[print$]
path = /etc/samba/drivers
browseable = yes
guest ok = no
read only = yes
------------------------------------------

I setup the samba user with:
------------------------
smbpasswd -a webster
------------------------

I used the command
--------------------
cupsaddsmb -a -v
--------------------

and the result was:
------------------------------------------------------------------------------------

Password for webster required to access localhost via SAMBA:
Running command: smbclient //localhost/print\$ -N -U'webster%[password]' -c 'mkdir W32X86;put /var/tmp/439fb7d81ff33 W32X86/PSC-1300.ppd;put /usr/share/cups/drivers/ps5ui.dll W32X86/ps5ui.dll;put /usr/share/cups/drivers/pscript.hlp W32X86/pscript.hlp;put /usr/share/cups/drivers/pscript.ntf W32X86/pscript.ntf;put /usr/share/cups/drivers/pscript5.dll W32X86/pscript5.dll' Domain=[NARSHE] OS=[Unix] Server=[Samba 3.0.14a-Ubuntu]
NT_STATUS_NETWORK_ACCESS_DENIED making remote directory \W32X86
NT_STATUS_ACCESS_DENIED opening remote file \W32X86/PSC-1300.ppd
NT_STATUS_ACCESS_DENIED opening remote file \W32X86/ps5ui.dll
NT_STATUS_ACCESS_DENIED opening remote file \W32X86/pscript.hlp
NT_STATUS_ACCESS_DENIED opening remote file \W32X86/pscript.ntf
NT_STATUS_ACCESS_DENIED opening remote file \W32X86/pscript5.dll
------------------------------------------------------------------------------------

I can do:
------------------------------------
smbclient //localhost/print\$ -N -U'webster%[password]' -c
------------------------------------
and browse around, ls the file list, etc. I just can't change anything.

If anyone could help me with the NT_STATUS_ACCESS_DENIED errors, I would greatly appreciate it!

-Kris

#1 lore raw

try setting print$ to readonly=no, writable=yes and see what happens. This would only be during the cupsaddsmb process. Then set it back to normal.

Thanks,

Tom Callahan
TESSCO Technologies
(443)-506-6216
[email protected]

A real engineer only resorts to documentation when the keyboard dents on the forehead get too noticeable.

Quoted 81 lines · Kris Hollingsworth

Hey all, I've been banging my head against the wall for the last day or two trying to get this working. I'm trying to get my Ubuntu Linux (Breezy Badger 5.10 release) to serve up print drivers to my windows box when trying to share the printer attached to it.

I think I've got it almost there, I've just run into a problem with permissions on the smbclient commands in the cupsaddsmb.

I've only been using linux for about a week, so any help on this would help me out immensely.

/etc/samba/smb.conf
------------------------------------------
[global]
load printers = yes
printing = cups
printcap name = cups

[printers]
path = /var/spool/samba
browseable = no
public = yes
guest ok = yes
writable = no
printable = yes
printer admin = webster

[print$]
path = /etc/samba/drivers
browseable = yes
guest ok = no
read only = yes
------------------------------------------

I setup the samba user with:
------------------------
smbpasswd -a webster
------------------------

I used the command
--------------------
cupsaddsmb -a -v
--------------------

and the result was:
------------------------------------------------------------------------------------

Password for webster required to access localhost via SAMBA:
Running command: smbclient //localhost/print\$ -N -U'webster%[password]' -c 'mkdir W32X86;put /var/tmp/439fb7d81ff33 W32X86/PSC-1300.ppd;put /usr/share/cups/drivers/ps5ui.dll W32X86/ps5ui.dll;put /usr/share/cups/drivers/pscript.hlp W32X86/pscript.hlp;put /usr/share/cups/drivers/pscript.ntf W32X86/pscript.ntf;put /usr/share/cups/drivers/pscript5.dll W32X86/pscript5.dll'
Domain=[NARSHE] OS=[Unix] Server=[Samba 3.0.14a-Ubuntu] NT_STATUS_NETWORK_ACCESS_DENIED making remote directory \W32X86 NT_STATUS_ACCESS_DENIED opening remote file \W32X86/PSC-1300.ppd NT_STATUS_ACCESS_DENIED opening remote file \W32X86/ps5ui.dll NT_STATUS_ACCESS_DENIED opening remote file \W32X86/pscript.hlp NT_STATUS_ACCESS_DENIED opening remote file \W32X86/pscript.ntf NT_STATUS_ACCESS_DENIED opening remote file \W32X86/pscript5.dll
------------------------------------------------------------------------------------

I can do:
------------------------------------
smbclient //localhost/print\$ -N -U'webster%[password]' -c
------------------------------------
and browse around, ls the file list, etc. I just can't change anything.

If anyone could help me with the NT_STATUS_ACCESS_DENIED errors, I would greatly appreciate it!

(quoted diff) +0 -2
-Kris
 
-

To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#2 lore raw
In reply to Kris Hollingsworth
Quoted 64 lines · Kris Hollingsworth

Hey all, I've been banging my head against the wall for the last day or two trying to get this working. I'm trying to get my Ubuntu Linux (Breezy Badger 5.10 release) to serve up print drivers to my windows box when trying to share the printer attached to it.

I think I've got it almost there, I've just run into a problem with permissions on the smbclient commands in the cupsaddsmb.

I've only been using linux for about a week, so any help on this would help me out immensely.

/etc/samba/smb.conf
------------------------------------------
[global]
load printers = yes
printing = cups
printcap name = cups

[printers]
path = /var/spool/samba
browseable = no
public = yes
guest ok = yes
writable = no
printable = yes
printer admin = webster

[print$]
path = /etc/samba/drivers
browseable = yes
guest ok = no
read only = yes
------------------------------------------

I setup the samba user with:
------------------------
smbpasswd -a webster
------------------------

I used the command
--------------------
cupsaddsmb -a -v
--------------------

and the result was:
------------------------------------------------------------------------------------

Password for webster required to access localhost via SAMBA:
Running command: smbclient //localhost/print\$ -N -U'webster%[password]' -c 'mkdir W32X86;put /var/tmp/439fb7d81ff33 W32X86/PSC-1300.ppd;put /usr/share/cups/drivers/ps5ui.dll W32X86/ps5ui.dll;put /usr/share/cups/drivers/pscript.hlp W32X86/pscript.hlp;put /usr/share/cups/drivers/pscript.ntf W32X86/pscript.ntf;put /usr/share/cups/drivers/pscript5.dll W32X86/pscript5.dll' Domain=[NARSHE] OS=[Unix] Server=[Samba 3.0.14a-Ubuntu] NT_STATUS_NETWORK_ACCESS_DENIED making remote directory \W32X86 NT_STATUS_ACCESS_DENIED opening remote file \W32X86/PSC-1300.ppd NT_STATUS_ACCESS_DENIED opening remote file \W32X86/ps5ui.dll NT_STATUS_ACCESS_DENIED opening remote file \W32X86/pscript.hlp NT_STATUS_ACCESS_DENIED opening remote file \W32X86/pscript.ntf NT_STATUS_ACCESS_DENIED opening remote file \W32X86/pscript5.dll
------------------------------------------------------------------------------------

Quoted 8 lines

I can do:
------------------------------------
smbclient //localhost/print\$ -N -U'webster%[password]' -c
------------------------------------
and browse around, ls the file list, etc. I just can't change anything.

If anyone could help me with the NT_STATUS_ACCESS_DENIED errors, I would greatly appreciate it!

Looks to me like your printer$ share is read only according to your smb.conf file. But I can't get it to work either. =P

Let me know if you figure it out.

--
Scott