Skip to contentSkip to conversation

Machine check 2.6.13.3 dual opteron

DISCUSSION Andy Stewart 2 participants 6 messages Dec 24, 2005 – Dec 25, 2005 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi everybody,

My machine locked up on me and I found this message on my serial console. I have no idea how to decode its meaning - can you help?

CPU 0: Machine Check Exception: 4
Bank 4: b200000000070f0f
TSC 39619ee1e2187

Kernel panic - not syncing: Machine check

My machine is a dual Opteron running the 2.6.13.3 kernel. I'm not positive, but I think I can reproduce it. Assuming that I can, what information would be helpful to debug the problem?

Please cc: me on the response as I am not subscribed to this mailing list.

Thanks!

Andy
- --
Andy Stewart, Founder
Worcester Linux Users' Group
Worcester, MA, USA
http://www.wlug.org

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFDrYYxHl0iXDssISsRAjONAJ9zoU0vSmikAkMqmQI2po0Jp9E83QCghO/M Zxq/FKaldR1hzyrJqiJ+sMg=
=gdcL
-----END PGP SIGNATURE-----

#1 lore raw

With the Opteron Bank 4 value you gave, this decodes to:

Decoding MCE value as MCi_STATUS: 'b200000000070f0f'
Bit  63:    Valid error
Bit  61:    UNCORRECTED error
Bit  60:    MCA Error Reporting Enabled
Bit  57:    Process Context Corrupt

HyperTransport Link Number= 0 Extended Error Code = 0x7 - WatchDog error

BUS Error:
Processor(generic)
TimeOut(timed out)
Memory Transaction Type(generic)
Mem or IO(generic)
Cache Level(generic)

You had an Uncorrectable Error.
Since you did not post an address error, I assume that it did NOT report such. Therefore, because of the WatchDog error, there might be an error between the CPU and memory. There is a hardware problem definitely.

CPU-Mem Controller
Even bad memory DIMM

doug thompson

Quoted 33 lines · --- Andy Stewart

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi everybody,

My machine locked up on me and I found this message on my serial console. I have no idea how to decode its meaning - can you help?

CPU 0: Machine Check Exception: 4
Bank 4: b200000000070f0f
TSC 39619ee1e2187

Kernel panic - not syncing: Machine check

My machine is a dual Opteron running the 2.6.13.3 kernel. I'm not positive, but I think I can reproduce it. Assuming that I can, what information would be helpful to debug the problem?

Please cc: me on the response as I am not subscribed to this mailing list.

Thanks!

Andy
- --
Andy Stewart, Founder
Worcester Linux Users' Group
Worcester, MA, USA
http://www.wlug.org

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

Quoted 10 lines

iD8DBQFDrYYxHl0iXDssISsRAjONAJ9zoU0vSmikAkMqmQI2po0Jp9E83QCghO/M Zxq/FKaldR1hzyrJqiJ+sMg=
=gdcL
-----END PGP SIGNATURE-----
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

"If you think Education is expensive, just try Ignorance"

"Don't tell people HOW to do things, tell them WHAT you want and they will surprise you with their ingenuity."
Gen George Patton

#2 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 23 lines · Doug Thompson

With the Opteron Bank 4 value you gave, this decodes to:

Decoding MCE value as MCi_STATUS: 'b200000000070f0f'
Bit  63:    Valid error
Bit  61:    UNCORRECTED error
Bit  60:    MCA Error Reporting Enabled
Bit  57:    Process Context Corrupt

HyperTransport Link Number= 0 Extended Error Code = 0x7 - WatchDog error

BUS Error:
Processor(generic)
TimeOut(timed out)
Memory Transaction Type(generic)
Mem or IO(generic)
Cache Level(generic)

You had an Uncorrectable Error.
Since you did not post an address error, I assume that it did NOT report such. Therefore, because of the WatchDog error, there might be an error between the CPU and memory. There is a hardware problem definitely.

Quoted 4 lines

CPU-Mem Controller
Even bad memory DIMM

doug thompson

HI Doug,

Thank you for your quick reply. There was no "address error" - the only
thing on the serial console is what I posted.

In the past, this board, the CPUs, and these memory DIMMs have passed 24 continuous hours of memtest, but perhaps something has deteriorated in the mean time. I'll run memtest again to see if I can find a problem.

FYI: This MB (MSI K8T Master2 FAR) has been problematic since day one.
A BIOS upgrade improved stability, but I've never gotten more then 21
straight days of uptime on this machine (compared to 200-300 days on several other machines in my house). I've had *many* random hangs but seldom does something get printed on the serial console. When it does hang, the serial console is unresponsive.

I'll be swapping out this MB in favor of a Tyan. I've put up with it long enough. Assuming that the Tyan MB solves the problem, I won't be purchasing any more MSI MBs (and neither will my friends if I have anything to say about it).

Thanks again for the help!

Andy

- --
Andy Stewart, Founder
Worcester Linux Users' Group
Worcester, MA, USA
http://www.wlug.org

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFDrhrVHl0iXDssISsRAhzLAJoCb5yTL2meARSIVhnQjP54AVVPOwCeJ2aS NWkOTzLQ57U6tuU8h+YM9bM=
=NH89
-----END PGP SIGNATURE-----

#6 lore raw
In reply to a message not in the archive

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 33 lines · Avuton Olrich
Quoted 6 lines · Andy Stewart

My machine locked up on me and I found this message on my serial console. I have no idea how to decode its meaning - can you help?

CPU 0: Machine Check Exception: 4
Bank 4: b200000000070f0f
TSC 39619ee1e2187

Quoted 7 lines
Kernel panic - not syncing: Machine check

My machine is a dual Opteron running the 2.6.13.3 kernel. I'm not positive, but I think I can reproduce it. Assuming that I can, what information would be helpful to debug the problem?

Please cc: me on the response as I am not subscribed to this mailing list.

Welcome to my life. Finding out what exactly's causing the problem is paramount to me, also. I'm getting a random crash sometimes after an hour, sometimes it'll go 24 hours. But the results are consistant. After talking to AMD Tech support, they basically said they could do nothing for me. Are your opterons dual core? I've gotten an email from someone who was having the same problem with a similar setup but was running a dual core chip.

I have had one person personally email me about this subject and he stated that taking one of his hard drives off 'slave' helped. (I'm only running one hard drive at the moment, which isn't on slave and doesn't help).

The recommended:
I run memtest86 (did for 24 hours, everything seems is fine there).

Quoted 8 lines

And they said they could help me no further.

Here's my thread on the subject.
http://marc.theaimsgroup.com/?l=linux-kernel&m=113239372109342&w=2
--
avuton
--
Anyone who quotes me in their sig is an idiot. -- Rusty Russell.

Hello Avuton,

Thank you for your reply to my inquiry. My Opterons are 244s and they are not dual core. Like you, my setup has passed 24 hours of memtest on at least 2 or 3 separate occasions.

I'm strongly suspicious of the MB since a BIOS upgrade improved my situation but there is still instability. Nothing else I've done has had as marked an effect on stability as that BIOS upgrade.

I've even turned off every spiggot on the MB and replaced them with their own circuit boards, all to no avail. This thing still hangs randomly - sometimes after a couple of days, sometimes after 3 weeks, sometimes multiple times in an evening.

I'll take a look at the thread which you referenced. I also plan to replace the MB due to my aforementioned suspicions.

Thanks!

Andy

- --
Andy Stewart, Founder
Worcester Linux Users' Group
Worcester, MA, USA
http://www.wlug.org

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFDrhxbHl0iXDssISsRAraeAJ99WLYZNBPvAiltl21oBS1RtwIt+gCcDUIK GJw+0tj7AOJooKb6E0gnka4=
=N+p9
-----END PGP SIGNATURE-----

#3 lore raw
In reply to Andy Stewart

I got an ASUS A8V-E with a 3500+ CPU, 2 GB of ram. I have had not problem with it.

I run Bluesmoke on it (bluesmoke.sourceforge.net), which is renamed EDAC in a submission for inclusion in the kernel (hopefully 2.6.16). Bluesmoke, scans the the K8's Memory controller looking for Correctable Errors that occur. The idea is that detection correctable errors and replacing memory can reduce sudden uncorrectable errors.

But your problem seems generated by the motherboard, no memory. SOMETHING is not quite right.

doug t

Quoted 57 lines · --- Andy Stewart

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 18 lines · Doug Thompson

With the Opteron Bank 4 value you gave, this decodes to:

Decoding MCE value as MCi_STATUS: 'b200000000070f0f'
Bit  63:    Valid error
Bit  61:    UNCORRECTED error
Bit  60:    MCA Error Reporting Enabled
Bit  57:    Process Context Corrupt

HyperTransport Link Number= 0 Extended Error Code = 0x7 - WatchDog error

BUS Error:
Processor(generic)
TimeOut(timed out)
Memory Transaction Type(generic)
Mem or IO(generic)
Cache Level(generic)

Quoted 2 lines

You had an Uncorrectable Error.
Since you did not post an address error, I assume that it did NOT report such. Therefore,

because

Quoted 1 line

of the WatchDog error, there might be an error between the CPU and memory. There is a

hardware

Quoted 6 lines

problem definitely.

CPU-Mem Controller
Even bad memory DIMM

doug thompson

HI Doug,

Thank you for your quick reply. There was no "address error" - the only
thing on the serial console is what I posted.

In the past, this board, the CPUs, and these memory DIMMs have passed 24 continuous hours of memtest, but perhaps something has deteriorated in the mean time. I'll run memtest again to see if I can find a problem.

FYI: This MB (MSI K8T Master2 FAR) has been problematic since day one.
A BIOS upgrade improved stability, but I've never gotten more then 21
straight days of uptime on this machine (compared to 200-300 days on several other machines in my house). I've had *many* random hangs but seldom does something get printed on the serial console. When it does hang, the serial console is unresponsive.

I'll be swapping out this MB in favor of a Tyan. I've put up with it long enough. Assuming that the Tyan MB solves the problem, I won't be purchasing any more MSI MBs (and neither will my friends if I have anything to say about it).

Thanks again for the help!

Quoted 9 lines

Andy

- --
Andy Stewart, Founder
Worcester Linux Users' Group
Worcester, MA, USA
http://www.wlug.org

"If you think Education is expensive, just try Ignorance"

"Don't tell people HOW to do things, tell them WHAT you want and they will surprise you with their ingenuity."
Gen George Patton

#4 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 10 lines · Doug Thompson

I got an ASUS A8V-E with a 3500+ CPU, 2 GB of ram. I have had not problem with it.

I run Bluesmoke on it (bluesmoke.sourceforge.net), which is renamed EDAC in a submission for inclusion in the kernel (hopefully 2.6.16). Bluesmoke, scans the the K8's Memory controller looking for Correctable Errors that occur. The idea is that detection correctable errors and replacing memory can reduce sudden uncorrectable errors.

But your problem seems generated by the motherboard, no memory. SOMETHING is not quite right.

doug t

HI Doug,

I'll be sure to take a look at Bluesmoke / EDAC. Thanks!

Now, I'd best go to bed or Santa won't come to my house. :-)

Andy

- --
Andy Stewart, Founder
Worcester Linux Users' Group
Worcester, MA, USA
http://www.wlug.org

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFDriHJHl0iXDssISsRAnqGAJ4rUEd7rF4uesucMhQaxTlW4byx3ACfRYV3 EJeZ3kXez6cRF1hxQJVh+NE=
=h52c
-----END PGP SIGNATURE-----