Skip to contentSkip to conversation

Use lvcreart -m to make a mirror

linux-lvm Fang,Dongyu 3 participants 5 messages Jan 5, 2006 – Jan 9, 2006

lore
Share & tools
lore
#0 lore raw

When I use lvcreate -l 4 --mirrors 1 -n mirror1 /dev/vg1 want to create mirror LV, I got four LV:

 ACTIVE            '/dev/vg1/mirror1' [16.00 MB] inherit
 ACTIVE            '/dev/vg1/mirror1_mlog' [4.00 MB] inherit
 ACTIVE            '/dev/vg1/mirror1_mimage_0' [16.00 MB] inherit
 ACTIVE            '/dev/vg1/mirror1_mimage_1' [16.00 MB] inherit

I think the LV mirror1 is the origin LV, mirror1_mlog is log, the two others should be images LV, so why there are two images(in my opinion, it should be only one), and I how to use then? Can I mount it? Thanks.
Fang,Dongyu

begin:vcard
fn:Dongyu Fang
n:Fang;Dongyu
version:2.1
end:vcard

#1 lore raw
Quoted 9 lines · Fang,Dongyu

When I use lvcreate -l 4 --mirrors 1 -n mirror1 /dev/vg1 want to create mirror LV, I got four LV:

 ACTIVE            '/dev/vg1/mirror1' [16.00 MB] inherit
 ACTIVE            '/dev/vg1/mirror1_mlog' [4.00 MB] inherit
 ACTIVE            '/dev/vg1/mirror1_mimage_0' [16.00 MB] inherit
 ACTIVE            '/dev/vg1/mirror1_mimage_1' [16.00 MB] inherit

I think the LV mirror1 is the origin LV, mirror1_mlog is log, the two others should be images LV, so why there are two images(in my opinion, it should be only one), and I how to use then? Can I mount it?

/dev/vg1/mirror1 is the device you mount, the _mimage_ are internal devices for LVM. You have the "original" (mimage_0) and the mirror (mimage_1).

The later revisions of LVM will hide these from the lvscan & lvs commands.

Signature · 1 line
patrick
#2 lore raw

Thanks your replay.
How can I mount the "original" (mimage_0) or the "mirror" (mimage_1) single? Because I want to verify it write/read data in both LV indeed.
And how can I remove the mirror relation between the two LV(let the "original" and "mirror" become two singe LV)? (I use lvconvert -m 0 vg1/mirror1 then LVs become one.)
Fang,Dongyu

Quoted 15 lines · Patrick Caulfield
Quoted 11 lines · Fang,Dongyu

When I use lvcreate -l 4 --mirrors 1 -n mirror1 /dev/vg1 want to create mirror LV, I got four LV:

ACTIVE            '/dev/vg1/mirror1' [16.00 MB] inherit
ACTIVE            '/dev/vg1/mirror1_mlog' [4.00 MB] inherit
ACTIVE            '/dev/vg1/mirror1_mimage_0' [16.00 MB] inherit
ACTIVE            '/dev/vg1/mirror1_mimage_1' [16.00 MB] inherit

I think the LV mirror1 is the origin LV, mirror1_mlog is log, the two others should be images LV, so why there are two images(in my opinion, it should be only one), and I how to use then? Can I mount it?

Quoted 6 lines

/dev/vg1/mirror1 is the device you mount, the _mimage_ are internal devices for LVM. You have the "original" (mimage_0) and the mirror (mimage_1).

The later revisions of LVM will hide these from the lvscan & lvs commands.

begin:vcard
fn:Dongyu Fang
n:Fang;Dongyu
version:2.1
end:vcard

#3 lore raw
Quoted 4 lines · Fang,Dongyu

Thanks your replay.
How can I mount the "original" (mimage_0) or the "mirror" (mimage_1) single?
Because I want to verify it write/read data in both LV indeed.

Because of internal cacheing I don't know whether that's a sensible thing to do.

Quoted 3 lines

And how can I remove the mirror relation between the two LV(let the
"original" and "mirror" become two singe LV)? (I use `lvconvert -m 0
vg1/mirror1` then LVs become one.)

With current RPMs you currently can't. The code is in CVS but it needs lots of testing.

Signature · 1 line
patrick
#4 lore raw

The attached script (originally from Jun'ichi Nomura) is what I've been using to validate mirror volumes. You might be able to pull out things for use in your tests. It uses device mapper and is design to attack a specific bug.

brassow

Quoted 24 lines · Patrick Caulfield
Quoted 4 lines · Fang,Dongyu

Thanks your replay.
How can I mount the "original" (mimage_0) or the "mirror" (mimage_1) single?
Because I want to verify it write/read data in both LV indeed.

Because of internal cacheing I don't know whether that's a sensible thing to do.

Quoted 3 lines

And how can I remove the mirror relation between the two LV(let the
"original" and "mirror" become two singe LV)? (I use `lvconvert -m 0
vg1/mirror1` then LVs become one.)

With current RPMs you currently can't. The code is in CVS but it needs lots of testing.

Signature · 7 lines
patrick

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/