Skip to contentSkip to conversation

BUG: spinlockup in kacpid of 2.6.15-rc6 during boot

DISCUSSION Larry Finger 1 participant 1 message Jan 5, 2006

lore
Share & tools
lore
#0 lore raw
Quoted 9 lines · Adrian Bunk
Quoted 3 lines · Larry Finger

I am getting an intermittent "BUG: spinlockup on CPU #0, kacpid/13, e3bcef9c" message when booting. I know it occurs from a cold boot, but am not sure about from a warm reboot.

I don't know where in the boot sequence it occurs as I only have the text display on the screen, which is as follows:

You can set a higher resolution using the vga= boot parameter (see Documentation/kernel-parameters.txt in the kernel sources).

Thanks - I'll set as high as I can.

Quoted 26 lines
Quoted 26 lines

...... unknown material that rolled off the top of the screen _spinlock + 0x1b/0x30
exit_io_context + 0x25/0x90
do_exit + 0x54/0x430
die + 0x17c/0x180
do_page_fault + 0x209/0x62e
error_code + 0x4f/0x54
show_stack + 0x9c/0x0e
show_registers + 0x18f/0x230
die + 0xfa/0x180
do_page_fault + 0x209/0x62e

BUG: spinlockup on CPU #0, kacpid/13, e3bcef9c

dump_stack + 0x1e/0x20
__spin_lock_debug + 0xb6/0xf0
_raw_spin_lock + 0x67/0x90
_spinlock + 0x1b/0x30
exit_io_context + 0x25/0x90
do_exit + 0x54/0x430
die + 0x17c/0x180
do_page_fault + 0x209/0x62e
error_code + 0x4f/0x54
show_stack + 0x9c/0x0e
show_registers + 0x18f/0x230
die + 0xfa/0x180
do_page_fault + 0x209/0x62e

Quoted 8 lines
Quoted 4 lines

The computer is an HP ze1115 notebook with a mobile K7 processor. The beginning lines of a normal dmesg are:

Linux version 2.6.15-rc6 (root@linux) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #4 PREEMPT
...

IOW, 2.6.15-rc6 does sometimes boot, and sometimes it doesn't boot?

Yes. I have never had it fail two times in a row. Powering off and restarting has fixed it everytime so far.

Quoted 1 line

Can you give information regarding which kernel versions are affected and which aren't, and what influences whether 2.6.15-rc6 does boot or does not boot?

I have not had this problem (yet?) with 2.6.15-rc7 or 2.6.15; however, it occurs so infrequently that I'm not sure I can rule out these later versions. The case I reported involved a dirty reiserfs file system. I had been debugging the bcm43xx driver and the system had frozen during shutdown because the module could not be unloaded. After I powered off for about 1 second, I restarted. The bug dump occurred fairly quickly and I believe it is early in the reboot sequence.

Larry