Skip to contentSkip to conversation

Make for AmigaOneG3SE fails

U-Boot-Users Felipe Gil Castiñeira 2 participants 3 messages Jan 7, 2006 – Jan 8, 2006

lore
Share & tools
lore
#0 lore raw

Hi,

I am studying the feasibility of using the "x86 BIOS emulator" (in /board/MAI/bios_emulator) to initialize an ATI graphics card.

As a first step, I am trying to compile U-Boot for AmigaOneG3SE (which uses the bios_emulator), but there are lots of warnings and errors. I am correcting the code, but the errors are endless. At least some of them seem related to the toolchain or to changes in the U-Boot includes. For example (an error compiling unmodified code):

In file included from ../bios_emulator/scitech/include/x86emu.h:50,
from ../bios_emulator/x86interface.c:1:
../bios_emulator/scitech/include/x86emu/types.h:42:23: sys/types.h:
No such file or directory

Has anyone here compiled U-Boot for AmigaOne? If the answer is affirmative, which toolchain (and version) did you use for the cross-compile? Thanks in advance.

Best regards,
Felipe.

P.S.: I use the ELDK compiler configured for ppc_74xx- under linux x86.

#1 lore raw
Quoted 6 lines · In message <[email protected]> you wrote:

I am studying the feasibility of using the "x86 BIOS emulator" (in /board/MAI/bios_emulator) to initialize an ATI graphics card.

As a first step, I am trying to compile U-Boot for AmigaOneG3SE (which uses the bios_emulator), but there are lots of warnings and errors. I am

I'm afraid you have to dig through this mess - unfortunately the AmigaOneG3SE port has never been really maintained.

Quoted 3 lines

Has anyone here compiled U-Boot for AmigaOne? If the answer is affirmative, which toolchain (and version) did you use for the cross-compile? Thanks in advance.

The port was added about 3 years ago (Nov 2002) in the U-Boot-0.2.0 time frame; it was workig by then, at least the Amiga folks released working binaries. I don't know if the code contributed back to the public source tree was ever clean and working - sorry, but I don't have access to such hardware, and there is no other maintainer for this port.

Quoted 1 line

P.S.: I use the ELDK compiler configured for ppc_74xx- under linux x86.

This should work fine. Problems are caused by the unmaintained source tree for this board.

Viele Gr??e,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
People with narrow minds usually have broad tongues.
#2 lore raw

Thanks Wolfgang,

Quoted 4 lines · Wolfgang Denk

I'm afraid you have to dig through this mess - unfortunately the AmigaOneG3SE port has never been really maintained.

That's what I was afraid of, but I had to ask :-) . Eventually, I managed to compile the code (with lots of warnings and quick-and-dirty modifications). Unfortunately, I don't have a lot of time for this task, but if I get any positive result, I will send it to the mailing list.

Best regards,
Felipe.