Skip to contentSkip to conversation

drivers/md/dm-raid1.c: Fix inconsistent mirroring after interrupted recovery

PATCH New Jun'ichi Nomura 1 participant 1 message Jan 10, 2006 Device mapper

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drivers/md/dm-raid1.c: Fix inconsistent mirroring after interrupted recovery

Hi,

dm-mirror has potential data corruption problem:
while on-disk log shows that all disk contents are in-sync, actual contents of the disks are not synchronized. This problem occurs if initial recovery (synching) is interrupted and resumed.

Attached patch fixes this problem.
Please consider to apply.

Background:

rh_dec() changes the region state from RH_NOSYNC (out-of-sync) to RH_CLEAN (in-sync), which results in the corresponding bit of clean_bits being set.

This is harmful if on-disk log is used and the map is removed/suspended before the initial sync is completed. The clean_bits is written down to the on-disk log at the map removal, and, upon resume, it's read and copied to sync_bits. Since the recovery process refers to the sync_bits to find a region to be recovered, the region whose state was changed from RH_NOSYNC to RH_CLEAN is no longer recovered.

If you haven't applied dm-raid1-read-balancing.patch proposed in dm-devel sometimes ago, the contents of the mirrored disk just corrupt silently.
If you have, balanced read may get bogus data from out-of-sync disks.

The patch keeps RH_NOSYNC state unchanged.
It will be changed to RH_RECOVERING when recovery starts and get reclaimed when the recovery completes. So it doesn't leak the region hash entry.

Thanks,
Jun'ichi "Nick" Nomura

Keep RH_NOSYNC state unchanged when I/O on the region completes.

rh_dec() changes the region state from RH_NOSYNC (out-of-sync) to RH_CLEAN (in-sync), which results in the corresponding bit of clean_bits being set.

This is harmful if on-disk log is used and the map is removed/suspended before the initial sync is completed. The clean_bits is written down to the on-disk log at the map removal, and, upon resume, it's read and copied to sync_bits. Since the recovery process refers to the sync_bits to find a region to be recovered, the region whose state was changed from RH_NOSYNC to RH_CLEAN is no longer recovered.

If you haven't applied dm-raid1-read-balancing.patch proposed in dm-devel sometimes ago, the contents of the mirrored disk just corrupt silently.
If you have, balanced read may get bogus data from out-of-sync disks.

The RH_NOSYNC region will be changed to RH_RECOVERING when recovery starts on the region and get reclaimed when the recovery completes.
So it doesn't leak the region hash entry.

drivers/md/dm-raid1.c +13 -1
diff -urp linux.orig/drivers/md/dm-raid1.c linux/drivers/md/dm-raid1.c
@@ -414,9 +414,21 @@ static void rh_dec(struct region_hash *r
 
 	spin_lock_irqsave(&rh->region_lock, flags);
 	if (atomic_dec_and_test(&reg->pending)) {
+		/*
+		 * There is no pending I/O for this region.
+		 * We can move the region to corresponding list for next action.
+		 * At this point, the region is not yet connected to any list.
+		 *
+		 * If the state is RH_NOSYNC, the region should be kept off
+		 * from clean list.
+		 * The hash entry for RH_NOSYNC will remain in memory
+		 * until the region is recovered or the map is reloaded.
+		 */
+
+		/* do nothing for RH_NOSYNC */
 		if (reg->state == RH_RECOVERING) {
 			list_add_tail(&reg->list, &rh->quiesced_regions);
-		} else {
+		} else if (reg->state == RH_DIRTY) {
 			reg->state = RH_CLEAN;
 			list_add(&reg->list, &rh->clean_regions);
 		}