Skip to contentSkip to conversation

mpt fusion - add support for fibre channel FC949ES

PATCH In review Michael Reed 2 participants 2 messages Jan 12, 2006 – Jan 13, 2006

Subsystems (2)
SCSI LSI Logic MPT fusion drivers (FC/SAS/SPI)
lore
Share & tools
lore

Michael Reed

author
#0 lore raw

PATCH 1/1 mpt fusion - add support for fibre channel FC949ES

Add software recognition for the new LSI Logic Fibre Channel controller. (Patch originally sent to me by Eric Moore.)

Signed-off-by Michael Reed <[email protected]>
drivers/message/fusion/mptbase.c +4 -0
diff -ru a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
@@ -1374,6 +1374,10 @@
 		ioc->bus_type = FC;
 		ioc->errata_flag_1064 = 1;
 	}
+	else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC949E) {
+		ioc->prod_name = "LSIFC949ES";
+		ioc->bus_type = FC;
+	}
 	else if (pdev->device == MPI_MANUFACTPAGE_DEVID_53C1030) {
 		ioc->prod_name = "LSI53C1030";
 		ioc->bus_type = SPI;
#1 lore raw
Quoted 2 lines · Michael Reed

Add software recognition for the new LSI Logic Fibre Channel controller. (Patch originally sent to me by Eric Moore.)

don't you need to add it to the pci_ids table aswell?

also include the previous patch to add the #define to pci_ids.h to this patch as akpm apparently doesn't lie that one on it's own.