Support for the Lite5200B
PATCH 1/1 Support for the Lite5200B
Hi all,
This is a patch to support the new Lite5200B board based on the MPC5200B. It has been implemented as a modification of the actual icecube. The main differences beetwen both boards are the type and amount of ram and flash memory. The Lite5200B has 256M of DDR ram and 32 M of flash mapped in two banks.It's used the cfi flash driver but it's needed a patch for this driver to support the x8/x16 flash in x8 mode. There is a patch supplied by Alex Bastos and I supply another one.
CHANGELOG
* Add support for the Lite5200B board:
Patch by Jose Maria Lopez, 16 Jan 2006
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: lite5200b_patch
Url: http://lists.denx.de/pipermail/u-boot/attachments/20060116/7616f198/attachment.txt
-------------- next part --------------
A non-text attachment was scrubbed...
Name: tlopez.vcf
Type: text/x-vcard
Size: 427 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20060116/7616f198/attachment.vcf
PATCH 1/1 Support for the Lite5200B
Quoted 3 lines · In message <[email protected]> you wrote:
* Add support for the Lite5200B board:
Patch by Jose Maria Lopez, 16 Jan 2006
Checked in, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is impractical for the standard to attempt to constrain the
behavior of code that does not obey the constraints of the standard.
- Doug Gwyn