Dongle with a strange configuration
Hi all,
I'm trying out this Billionton dongle (CSR-based, class 1), and it's curious that:
Name: 'James-1711....' (I guess James what one of the developers)
Class: 0x000000
HCI Ver: 1.1 (0x1) HCI Rev: 0x460 LMP Ver: 1.1 (0x1) LMP Subver: 0x460
The problem is that when I start hcid, it doesn't configure the dongle with the values in hcid.conf, but the ones above. I've tried various combinations of inserting, then starting hcid, having hcid running then insert, etc.
Can anyone give me an insight as to why this is happening? How can I get the dongle to init with the right settings?
Regards,
Mike
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Marcel Holtmann
maintainerHi Mike,
Quoted 6 lines
I'm trying out this Billionton dongle (CSR-based, class 1), and it's curious that:
Name: 'James-1711....' (I guess James what one of the developers)
Class:0x000000
HCI Ver: 1.1 (0x1) HCI Rev:0x460LMP Ver: 1.1 (0x1) LMP Subver:0x460
are you sure this is a CSR dongle? The build id is a little bit too high for a Bluetooth 1.1 dongle from CSR.
Quoted 7 lines
The problem is that when I start hcid, it doesn't configure the dongle with the values in hcid.conf, but the ones above. I've tried various combinations of inserting, then starting hcid, having hcid running then insert, etc.
Can anyone give me an insight as to why this is happening? How can I get the dongle to init with the right settings?
Run "hcidump -X -V" before you start hcid and look out what it tells you.
Regards
Marcel
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Hi Marcel,
Thanks for your input - I have the dongle out of plastics, and will be lifting the RF shield off today, this will tell for sure.
Hcid is running fine now, I have found that if I boot with the dongle inserted, all goes well, I'll investigate a bit further with your suggestion.
Best regards,
Mike
Quoted 43 lines
-----Mensaje original-----
De: [email protected] [mailto:[email protected]] En nombre de Marcel Holtmann
Enviado el: viernes, 20 de enero de 2006 2:15
Para: [email protected]
Asunto: Re: [Bluez-devel] Dongle with a strange configurationHi Mike,
Quoted 1 line
I'm trying out this Billionton dongle (CSR-based, class 1),
and it's
Quoted 5 lines
curious that:
Name: 'James-1711....' (I guess James what one of the developers)
Class:0x000000
HCI Ver: 1.1 (0x1) HCI Rev:0x460LMP Ver: 1.1 (0x1) LMPSubver:
0x460are you sure this is a CSR dongle? The build id is a little bit too high for a Bluetooth 1.1 dongle from CSR.
Quoted 1 line
The problem is that when I start hcid, it doesn't configure
the dongle
Quoted 1 line
with the values in hcid.conf, but the ones above. I've
tried various
Quoted 4 lines
combinations of inserting, then starting hcid, having hcid running then insert, etc.
Can anyone give me an insight as to why this is happening?
How can I
Quoted 1 line
get the dongle to init with the right settings?
Run "hcidump -X -V" before you start hcid and look out what it tells you.
Regards
Marcel
Quoted 6 lines
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&
dat=121642
Quoted 5 lines
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Quoted 4 lines · Marcel Holtmann
Quoted 1 line
HCI Ver: 1.1 (
0x1) HCI Rev:0x460LMP Ver: 1.1 (0x1) LMP Subver:0x460are you sure this is a CSR dongle? The build id is a little bit too high for a Bluetooth 1.1 dongle from CSR.
The build ID looks fine. It's a BlueCore3-ROM part with 17.11 firmware. It is 1.1 only. The full firmware ID is:
bc3n_4hci_bt1.1_17.11_encr128_nodfu_nopsfl_special_ghostbat
and it was released on 7 January 2004.
- Steven
Signature · 12 lines
To access the latest news from CSR copy this link into a web browser: http://www.csr.com/email_sig.html ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 _______________________________________________ Bluez-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bluez-devel