PROBLEM: "rmmod snd_cmipci" cause an Oops
"rmmod snd_cmipci" cause an Oops.
Linux-2.6.14 does not have this bug.
# rmmod snd_cmipci
Unable to handle kernel NULL pointer dereference at virtual address
00000018
printing eip:
c011b9da
*pde = 00000000
Oops: 0000 [#1]
PREEMPT
Modules linked in: lp snd_cmipci snd_pcm_oss snd_mixer_oss snd_pcm
snd_page_alloc snd_opl3_lib snd_timer snd_hwdep
snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore pl2303 usbserial
ohci_hcd usbcore sis_agp agpgart nls_cp866
vfat fat fuse parport_pc parport psmouse 8250 serial_core unix
CPU: 0
EIP: 0060:[<c011b9da>] Not tainted VLI
EFLAGS: 00010202 (2.6.15.4-gaa)
EIP is at __release_resource+0xa/0x50
eax: 00000000 ebx: c145c000 ecx: 00000018 edx: c2f5f3a0
esi: c2c7e540 edi: 00001fff ebp: c2c7e400 esp: c145de64
ds: 007b es: 007b ss: 0068
Process rmmod (pid: 2685, threadinfo=c145c000 task=c34d7560)
Stack: c011bae1 c2f5f3a0 c2f5f3a0 c2c7e540 c4a67914 c2f5f3a0 c3655400
c49ed65f
c2f5f3a0 c2f5f3e0 c4a679fd c3655400 00001000 c4a67c72 c2c7e400
c3655400
c145c000 c2c7e400 c4a9c548 c4a9c548 c4a62de9 c2c7e400 00000001
c01ec0cf
Call Trace:
[<c011bae1>] release_resource+0x21/0x50
[<c4a67914>] release_and_free_resource+0x14/0x30 [snd]
[<c49ed65f>] snd_opl3_free+0x1f/0x40 [snd_opl3_lib]
[<c4a679fd>] snd_device_free+0x5d/0xb0 [snd]
[<c4a67c72>] snd_device_free_all+0x62/0x70 [snd]
[<c4a62de9>] snd_card_free+0x109/0x210 [snd]
[<c01ec0cf>] kref_put+0x2f/0x80
[<c4a97bf9>] snd_cmipci_remove+0x19/0x24 [snd_cmipci]
[<c01f621e>] pci_device_remove+0x1e/0x40
[<c0227522>] __device_release_driver+0x62/0xa0
[<c0227634>] driver_detach+0xa4/0xbe
[<c0226e83>] bus_remove_driver+0x53/0x80
[<c0227950>] driver_unregister+0x10/0x20
[<c01f64a3>] pci_unregister_driver+0x13/0x20
[<c4a97c9f>] alsa_card_cmipci_exit+0xf/0x11 [snd_cmipci]
[<c0131425>] sys_delete_module+0x155/0x1a0
[<c014c9d4>] sys_munmap+0x44/0x70
[<c0102f21>] syscall_call+0x7/0xb
Code: 0c c3 89 47 14 89 3a 89 77 10 31 f6 89 f0 8b 1c 24 8b 74 24 04 8b 7c
24 08 83 c4 0c c3 8d 74 26 00 8b 54 24 04 8b
42 10 8d 48 18 <8b> 40 18 85 c0 74 2f 39 c2 75 13 8b 42 14 89 01 31 c0 c7
42 10
<6>note: rmmod[2685] exited with preempt_count 1
Segmentation fault# cat /proc/version Linux version 2.6.15.4-gaa (root@gaa) (gcc version 4.0.3 20060115 (prerelease) (Debian 4.0.2-7)) #1 PREEMPT Sat Feb 11 22:11:07 MSK 2006
# ./ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.
Linux gaa 2.6.15.4-gaa #1 PREEMPT Sat Feb 11 22:11:07 MSK 2006 i686 GNU/ Linux
Gnu C 4.0.3 Gnu make 3.80 binutils 2.16.91 util-linux 2.11z mount 2.12 module-init-tools 3.2-pre1 e2fsprogs 1.38 reiserfsprogs line reiser4progs line PPP 2.4.3 Linux C Library 2.3.5 Dynamic linker (ldd) 2.3.5 Procps 3.1.9 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 5.2.1 udev 056 Modules Loaded lp snd_cmipci snd_pcm_oss snd_mixer_oss snd_pcm
snd_page_alloc snd_opl3_lib snd_timer snd_hwdep snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore pl2303 usbserial ohci_hcd usbcore sis_agp agpgart nls_cp866 vfat fat fuse parport_pc parport psmouse 8250 serial_core unix
# cat /proc/cpuinfo processor: 0 vendor_id: CyrixInstead cpu family: 6 model: 2 model name: M II 3.5x Core/Bus Clock stepping: 4 cpu MHz: 292.363 fdiv_bug: no hlt_bug: no f00f_bug: no coma_bug: no fpu: yes fpu_exception: yes cpuid level: 1 wp: yes flags: fpu de tsc msr cx8 pge cmov mmx cyrix_arr bogomips: 585.45
# cat /proc/modules lp 12904 0 - Live 0xc4a2e000 snd_cmipci 34720 0 - Unloading 0xc4a94000 snd_pcm_oss 55680 0 - Live 0xc4ab7000 snd_mixer_oss 19968 1 snd_pcm_oss, Live 0xc4a82000 snd_pcm 95176 2 snd_cmipci,snd_pcm_oss, Live 0xc4a9e000 snd_page_alloc 10952 1 snd_pcm, Live 0xc4a3b000 snd_opl3_lib 11104 1 snd_cmipci, Live 0xc49ed000 snd_timer 26212 2 snd_pcm,snd_opl3_lib, Live 0xc4a7a000 snd_hwdep 9504 1 snd_opl3_lib, Live 0xc4a2a000 snd_mpu401_uart 7840 1 snd_cmipci, Live 0xc4981000 snd_rawmidi 26272 1 snd_mpu401_uart, Live 0xc4a33000 snd_seq_device 8748 2 snd_opl3_lib,snd_rawmidi, Live 0xc49f1000 snd 55492 10 snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib, snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device, Live 0xc4a62000 soundcore 10304 1 snd, Live 0xc49bd000 pl2303 21540 0 - Live 0xc4a17000 usbserial 29056 1 pl2303, Live 0xc4a21000 ohci_hcd 22340 0 - Live 0xc49f5000 usbcore 135748 4 pl2303,usbserial,ohci_hcd, Live 0xc4a3f000 sis_agp 8740 0 - Live 0xc49b9000 agpgart 35816 1 sis_agp, Live 0xc4a0d000 nls_cp866 5088 1 - Live 0xc4984000 vfat 14144 1 - Live 0xc49b4000 fat 53788 1 vfat, Live 0xc49fe000 fuse 40428 0 - Live 0xc49e2000 parport_pc 37124 1 - Live 0xc49d7000 parport 39592 2 lp,parport_pc, Live 0xc49cc000 psmouse 39268 0 - Live 0xc49c1000 8250 23924 0 - Live 0xc49ad000 serial_core 22688 1 8250, Live 0xc49a6000 unix 29424 8 - Live 0xc498b000
# cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 0378-037a : parport0 037b-037f : parport0 03c0-03df : vesafb 03f6-03f6 : ide0 03f8-03ff : serial 0cf8-0cff : PCI conf1 4000-400f : 0000:00:01.1 4000-4007 : ide0 4008-400f : ide1 f400-f47f : 0000:00:14.0 f600-f6ff : 0000:00:0d.0 f600-f6ff : CMI8738
# cat /proc/iomem 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-03bfffff : System RAM 00100000-002c0126 : Kernel code 002c0127-00333eff : Kernel data 08000000-083fffff : vesafb fec00000-fec00fff : reserved fee00000-fee00fff : reserved ff400000-ff7fffff : 0000:00:14.0 ffadf000-ffadffff : 0000:00:01.2 ffadf000-ffadffff : ohci_hcd ffae0000-ffae7fff : 0000:00:14.0 ffaf0000-ffafffff : 0000:00:14.0 fffe0000-ffffffff : reserved
# lspci -vvv 0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 5597 [SiS5582] (rev 10) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64
0000:00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:01.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 8a [Master SecP PriP])
Subsystem: Unknown device 2841:a212
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at 4000 [size=16]
0000:00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 10) (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ffadf000 (32-bit, non-prefetchable) [size=4K]
0000:00:0d.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at f600 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:14.0 VGA compatible controller: Silicon Integrated Systems [SiS] 5597/5598/6326 VGA (rev 68) (prog-if 00 [VGA])
Subsystem: Silicon Integrated Systems [SiS] 5597/5598/6326 VGA
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at ff400000 (32-bit, prefetchable) [size=4M] Region 1: Memory at ffaf0000 (32-bit, non-prefetchable) [size=64K] Region 2: I/O ports at f400 [size=128]
Expansion ROM at ffae0000 [disabled] [size=32K]
At Thu, 16 Feb 2006 13:19:19 +0300 (MSK),
Quoted 49 lines · <[email protected]> wrote:
"rmmod
snd_cmipci" cause an Oops.
Linux-2.6.14 does not have this bug.# rmmod snd_cmipci Unable to handle kernel NULL pointer dereference at virtual address 00000018 printing eip: c011b9da *pde = 00000000 Oops: 0000 [#1] PREEMPT Modules linked in: lp snd_cmipci snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_opl3_lib snd_timer snd_hwdep snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore pl2303 usbserial ohci_hcd usbcore sis_agp agpgart nls_cp866 vfat fat fuse parport_pc parport psmouse 8250 serial_core unix CPU: 0 EIP: 0060:[<c011b9da>] Not tainted VLI EFLAGS: 00010202 (2.6.15.4-gaa) EIP is at __release_resource+0xa/0x50 eax: 00000000 ebx: c145c000 ecx: 00000018 edx: c2f5f3a0 esi: c2c7e540 edi: 00001fff ebp: c2c7e400 esp: c145de64 ds: 007b es: 007b ss: 0068 Process rmmod (pid: 2685, threadinfo=c145c000 task=c34d7560) Stack: c011bae1 c2f5f3a0 c2f5f3a0 c2c7e540 c4a67914 c2f5f3a0 c3655400 c49ed65f c2f5f3a0 c2f5f3e0 c4a679fd c3655400 00001000 c4a67c72 c2c7e400 c3655400 c145c000 c2c7e400 c4a9c548 c4a9c548 c4a62de9 c2c7e400 00000001 c01ec0cf Call Trace: [<c011bae1>] release_resource+0x21/0x50 [<c4a67914>] release_and_free_resource+0x14/0x30 [snd] [<c49ed65f>] snd_opl3_free+0x1f/0x40 [snd_opl3_lib] [<c4a679fd>] snd_device_free+0x5d/0xb0 [snd] [<c4a67c72>] snd_device_free_all+0x62/0x70 [snd] [<c4a62de9>] snd_card_free+0x109/0x210 [snd] [<c01ec0cf>] kref_put+0x2f/0x80 [<c4a97bf9>] snd_cmipci_remove+0x19/0x24 [snd_cmipci] [<c01f621e>] pci_device_remove+0x1e/0x40 [<c0227522>] __device_release_driver+0x62/0xa0 [<c0227634>] driver_detach+0xa4/0xbe [<c0226e83>] bus_remove_driver+0x53/0x80 [<c0227950>] driver_unregister+0x10/0x20 [<c01f64a3>] pci_unregister_driver+0x13/0x20 [<c4a97c9f>] alsa_card_cmipci_exit+0xf/0x11 [snd_cmipci] [<c0131425>] sys_delete_module+0x155/0x1a0
Quoted 8 lines
[<c014c9d4>] sys_munmap+0x44/0x70 [<c0102f21>] syscall_call+0x7/0xb Code: 0c c3 89 47 14 89 3a 89 77 10 31 f6 89 f0 8b 1c 24 8b 74 24 04 8b 7c 24 08 83 c4 0c c3 8d 74 26 00 8b 54 24 04 8b 42 10 8d 48 18 <8b> 40 18 85 c0 74 2f 39 c2 75 13 8b 42 14 89 01 31 c0 c7 42 10 <6>note: rmmod[2685] exited with preempt_count 1 Segmentation fault
Likely fixed already in 2.6.16-rc by the patch below.
Takashi
[ALSA] opl3 - Fix the unreleased resources
Modules: OPL3
Fix the unreleased resources in the error path of snd_opl3_create().
---
commit 676338a1623ee9b60a6efb19ef8f743ab3b2eecb
tree 353750772b10adbfa8eed9a09fea94b72f8f55ad
parent 3e23c658833f135508127c955d40d7c9387f71dd
author Takashi Iwai <[email protected]> Tue, 03 Jan 2006 19:56:55 +0100 committer Jaroslav Kysela <[email protected]> Wed, 04 Jan 2006 10:13:52 +0100
sound/drivers/opl3/opl3_lib.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
sound/drivers/opl3/opl3_lib.c +3 -3
@@ -409,13 +409,13 @@ int snd_opl3_create(struct snd_card *carif (! integrated) {if ((opl3->res_l_port =request_region (l_port,2 ,"OPL2/3 (left)" )) ==NULL ) {snd_printk (KERN_ERR "opl3: can't grab left port 0x%lx\n" , l_port); -snd_opl3_free (opl3); +snd_device_free (card, opl3);return -EBUSY ; }if (r_port !=0 && (opl3->res_r_port =request_region (r_port,2 ,"OPL2/3 (right)" )) ==NULL ) {snd_printk (KERN_ERR "opl3: can't grab right port 0x%lx\n" , r_port); -snd_opl3_free (opl3); +snd_device_free (card, opl3);return -EBUSY ; } }
@@ -434,7 +434,7 @@ int snd_opl3_create(struct snd_card *carif ((err =snd_opl3_detect (opl3)) <0 ) {snd_printd ("OPL2/3 chip not detected at 0x%lx/0x%lx\n" , opl3->l_port, opl3->r_port); -snd_opl3_free (opl3); +snd_device_free (card, opl3);return err; }/* detect routine returns correct hardware type */