Block I/O while SG reset operation in progress - midlayer portion
PATCH 1/2 Block I/O while SG reset operation in progress - midlayer portion
This is the midlayer portion of the patch
This patch ensures that i/o is stopped while an eh handler is being processed. It adds a new flag, set by the async reset callers, which augments the host-in-reset checks and stops i/o. The async reset callers are already synchronized to hold off until the error thread is no longer running.
-- james s
drivers/scsi/scsi_error.c +10 -0
@@ -1654,7 +1654,9 @@ int scsi_reset_provider(struct scsi_device *dev, int flag) {struct scsi_cmnd *scmd =scsi_get_command (dev,GFP_KERNEL ); +struct Scsi_Host *shost = dev->host;struct request req; +unsigned long flags;int rtn; scmd->request = &req;
@@ -1684,6 +1686,10 @@ scsi_reset_provider(struct scsi_device **/ scmd->pid =0 ; +spin_lock_irqsave (shost->host_lock, flags); + shost->tmf_in_progress =1 ; +spin_unlock_irqrestore (shost->host_lock, flags); +switch (flag) {case SCSI_TRY_RESET_DEVICE : rtn =scsi_try_bus_device_reset (scmd);
@@ -1702,6 +1708,10 @@ scsi_reset_provider(struct scsi_device * rtn =FAILED ; } +spin_lock_irqsave (shost->host_lock, flags); + shost->tmf_in_progress =0 ; +spin_unlock_irqrestore (shost->host_lock, flags); +scsi_next_command (scmd);return rtn; }
include/scsi/scsi_host.h +5 -1
@@ -556,6 +556,9 @@ struct Scsi_Host {*/ unsigned ordered_tag:1; +/* task mgmt function in progress */ + unsigned tmf_in_progress:1; +/* * Optional work queue to be utilized by the transport */
@@ -633,7 +636,8 @@ static inline int scsi_host_in_recovery( {return shost->shost_state ==SHOST_RECOVERY || shost->shost_state ==SHOST_CANCEL_RECOVERY || - shost->shost_state ==SHOST_DEL_RECOVERY ; + shost->shost_state ==SHOST_DEL_RECOVERY || + shost->tmf_in_progress; }extern int scsi_queue_work (struct Scsi_Host *,struct work_struct *);
Quoted 7 lines · James Smart
This is the midlayer portion of the patch
This patch ensures that i/o is stopped while an eh handler is being processed. It adds a new flag, set by the async reset callers, which augments the host-in-reset checks and stops i/o. The async reset callers are already synchronized to hold off until the error thread is no longer running.
Why the new flag instead of calling scsi_host_set_state(shost, SHOST_RECOVERY) or a new state if you want different behavior?
Not using the state model but still doing recovery actions may run into issues if these happen while someone tries to remove a host.
-andmike
--
Michael Anderson
[email protected]
Well for a couple of reasons. I didn't view it as an actual recovery function as it's execution doesn't attempt to change the state of the shost, starget or sdev. It's not part of an escalation policy, etc. It's essentially performing the same effect as a reset by some other initiator in a multi-initiator environment, just with i/o failing faster than it may normally take us to detect it. As for side effects on the teardown, I don't see anything different than what exists today. At worst, it should only add a short delay until the ioflow resumes.
I also looked at what it would take to implement a full state change or piggy back on SHOST_RECOVERY. It's a significant amount of code, and the addition of a new state brings it's own set of additional issues to get everything to play right. In the end, I saw very little change in result, but with lots of code changes.
My main concern was - what is the interface definition we're telling the LLDD's for the eh routines ? Does the LLDD expect to always be entered in them while in the error thread ? Does the LLDD expect that an eh routine will never be invoked will another call to that routine is outstanding ? Obviously, none of these are true with the existing implementation.
Thoughts ?
-- james
Quoted 20 lines · Mike Anderson
Quoted 7 lines · James Smart
This is the midlayer portion of the patch
This patch ensures that i/o is stopped while an eh handler is being processed. It adds a new flag, set by the async reset callers, which augments the host-in-reset checks and stops i/o. The async reset callers are already synchronized to hold off until the error thread is no longer running.
Why the new flag instead of calling
scsi_host_set_state(shost, SHOST_RECOVERY)or a new state if you want different behavior?Not using the state model but still doing recovery actions may run into issues if these happen while someone tries to remove a host.
-andmike
--
Michael Anderson
[email protected]
Quoted 8 lines · James Smart
Well for a couple of reasons. I didn't view it as an actual recovery function as it's execution doesn't attempt to change the state of the shost, starget or sdev. It's not part of an escalation policy, etc. It's essentially performing the same effect as a reset by some other initiator in a multi-initiator environment, just with i/o failing faster than it may normally take us to detect it. As for side effects on the teardown, I don't see anything different than what exists today. At worst, it should only add a short delay until the ioflow resumes.
I agree it is unsafe today as we do not restrict the scsi_reset_provider during scsi_remove_host.
In scsi_remove_host there was code added to detect recovery running during removal and try to reduce the chance of eh_* routines being called post scsi_remove_host returning.
Quoted 7 lines
I also looked at what it would take to implement a full state change or piggy back on
SHOST_RECOVERY. It's a significant amount of code, and the addition of a new state brings it's own set of additional issues to get everything to play right. In the end, I saw very little change in result, but with lots of code changes.
Yes, there is some code overhead, but some of it is needed. In looking at your patch you add to the scsi_host_in_recovery case, but do not have a wake_up for event waiters on host_wait.
Quoted 6 lines
My main concern was - what is the interface definition we're telling the LLDD's for the eh routines ? Does the LLDD expect to always be entered in them while in the error thread ? Does the LLDD expect that an eh routine will never be invoked will another call to that routine is outstanding ? Obviously, none of these are true with the existing implementation.
Well the scsi_mid_low_api.txt indicates that the eh_*_reset_handler routines will be called with "No other commands will be queued on current host during eh". As you have indicated this is not true today. I did review a few reset functions: One checked to see if a reset action was pending and returned an error, the others appeared to not care about current state of a reset action.
-andmike
--
Michael Anderson
[email protected]