iptables-problem
Subsystems (2)
Hi all
I have a Lan with range IP:192.168.1.0/24 that
192.168.1.3 is my webserver.
& have a firewall with 2 eth (eth0:192.168.1.2)
& (eth1:217.218.68.20) .
I want when firewall get web request packet
with eth1 then give it to eth0 & eth0 send
packet to 192.168.1.3:80.
I used these iptables that SNAT didn't work(Bad
argument):
iptables -A PREROUTING -t nat -p tcp -d
217.218.68.20 --dport 80 -j SNAT --to
192.168.1.2:80
or(--to-source 192.168.1.3:80)
But DNAT is working good:
iptables -A PREROUTING -t nat -p tcp -d
217.218.68.20 --dport 80 -j DNAT --to
192.168.1.3
with regards.
amir sarbazi
amir_sarbazi <[email protected]> :
[...]
Quoted 4 lines
I used these iptables that SNAT didn't work(Bad
argument):iptables -A PREROUTING -t nat -p tcp -d 217.218.68.20 --dport 80 \ -j SNAT --to 192.168.1.2:80 or(--to-source 192.168.1.3:80)
$ LANG=en_US man 8 iptables
[...]
SNAT
This target is only valid in the nat table, in the POSTROUTING chain.
^^^^^^^^^^^
--
Ueimor