Skip to contentSkip to conversation

Recoding of {git,cg}-log output

PATCH Krzysiek Pawlik 3 participants 4 messages Jun 15, 2016 Kbuild

lore
Share & tools
lore
#0 lore raw

First: a little "why": having /usr/bin/vim as PAGER allows to enter UTF-8 commit messages quite easily, the problem is when git-log (or cg-log) is run in terminal that's not UTF-8. In my case: terminal is ISO-8859-2 and:

nelchael@nelchael ~$ cat ~/.vimrc | grep gitci
au BufRead /tmp/gitci* setlocal textwidth=75 fileencoding=utf-8 encoding=utf-8 fileencodings=utf-8,default

So... having {git,cg}-log recode the log entires when displaying is quite useful. Two patches attached:

a. git-log-recode.patch - uses iconv to recode the log output to
GIT_LOG_RECODE encoding
b. cg-log-recode.patch - the same, but for cogito

With this patches it's possible to write UTF-8 commit messages and see them ok in non-UTF-8 terminal in log by having GIT_LOG_RECODE=iso-8859-2.

Comments?

Signature · 2 lines
Krzysiek Pawlik (Nelchael)
RLU #322999 GPG Key ID: 0xBC555551
cg-log renamed from usr/bin/cg-log +10 -2
@@ -348,13 +348,21 @@
 
 if [ "$shortlog" ]; then
 	# Special care here.
-	$revls $sep "${ARGS[@]}" | git-shortlog | pager
+	if [ -n "${GIT_LOG_RECODE}" ]; then
+		$revls $sep "${ARGS[@]}" | git-shortlog | iconv --from-code=UTF-8 --to-code="${GIT_LOG_RECODE}" | pager
+	else
+		$revls $sep "${ARGS[@]}" | git-shortlog | pager
+	fi
 	exit
 fi
 
 
 # LESS="S" will prevent less to wrap too long titles to multiple lines;
 # you can scroll horizontally.
-$revls $sep "${ARGS[@]}" | print_commit_log | _local_CG_LESS="S" pager
+if [ -n "${GIT_LOG_RECODE}" ]; then
+	$revls $sep "${ARGS[@]}" | print_commit_log | iconv --from-code=UTF-8 --to-code="${GIT_LOG_RECODE}" | _local_CG_LESS="S" pager
+else
+	$revls $sep "${ARGS[@]}" | print_commit_log | _local_CG_LESS="S" pager
+fi
 
 exit 0
git-log renamed from usr/bin/git-log +8 -2
@@ -11,5 +11,11 @@
 [ "$revs" ] || {
 	die "No HEAD ref"
 }
-git-rev-list --pretty $(git-rev-parse --default HEAD "$@") |
-LESS=-S ${PAGER:-less}
+if [ -n "${GIT_LOG_RECODE}" ]; then
+	git-rev-list --pretty $(git-rev-parse --default HEAD "$@") | \
+		iconv --from-code=UTF-8 --to-code="${GIT_LOG_RECODE}" | \
+		LESS=-S ${PAGER:-less}
+else
+	git-rev-list --pretty $(git-rev-parse --default HEAD "$@") | \
+	LESS=-S ${PAGER:-less}
+fi
#1 lore raw

Dear diary, on Mon, Feb 27, 2006 at 01:10:44AM CET, I got a letter where Krzysiek Pawlik <[email protected]> said that...

Quoted 9 lines

First: a little "why": having /usr/bin/vim as PAGER allows to enter UTF-8 commit messages quite easily, the problem is when git-log (or cg-log) is run in terminal that's not UTF-8. In my case: terminal is ISO-8859-2 and:

nelchael@nelchael ~$ cat ~/.vimrc | grep gitci
au BufRead /tmp/gitci* setlocal textwidth=75 fileencoding=utf-8 encoding=utf-8 fileencodings=utf-8,default

Wouldn't it be enough to also set termencoding?

Quoted 11 lines

So... having {git,cg}-log recode the log entires when displaying is quite useful. Two patches attached:

a. git-log-recode.patch - uses iconv to recode the log output to
GIT_LOG_RECODE encoding
b. cg-log-recode.patch - the same, but for cogito

With this patches it's possible to write UTF-8 commit messages and see them ok in non-UTF-8 terminal in log by having GIT_LOG_RECODE=iso-8859-2.

Comments?

Not opposed in principle. But it would be much more sensible to have something like $GIT_META_ENCODING (defaulting probably to utf8), recode to whatever is your current locale, have the appropriate setting in the configfile, ...

Signature · 5 lines
				Petr "Pasky" Baudis
Stuff: http://pasky.or.cz/
Of the 3 great composers Mozart tells us what it's like to be human,
Beethoven tells us what it's like to be Beethoven and Bach tells us
what it's like to be the universe.  -- Douglas Adams
#2 lore raw
In reply to Krzysiek Pawlik

Hi,

Quoted 3 lines · Krzysiek Pawlik

First: a little "why": having /usr/bin/vim as PAGER allows to enter UTF-8 commit messages quite easily, the problem is when git-log (or cg-log) is run in terminal that's not UTF-8.

Of course, you could always set up a script doing the recoding and the paging, like

-- snip --
#!/bin/sh

iconv -f UTF-8 -t ISO-8859-2 "$@" | vim
-- snap --

and point your PAGER to that script (which is untested BTW). The advantage of this approach compared to adjusting git is that other programs use PAGER, too.

Hth,
Dscho

#3 lore raw
Quoted 2 lines · Johannes Schindelin

Of course, you could always set up a script doing the recoding and the paging, like

No.

Quoted 2 lines

The advantage of this approach compared to adjusting git is that other programs use PAGER, too.

Passing code (web pages, etc) throught iconv is not a good idea - {git,cg}-diff should show the file content as it is, not altered by iconv.

Changing PAGER is a bit... ugly and messy way of doing it. Assume that I work on some files and want to look at some unversioned files outside the tree (like docs, man pages, whatever) and the $PAGER passes the legitimate ISO8859-2 files through iconv, what gives us garbage. And we end up changing pager very often - Bad Idea (TM).

Signature · 2 lines
Krzysiek Pawlik (Nelchael)
RLU #322999 GPG Key ID: 0xBC555551