Skip to contentSkip to conversation

TSC unstable on Intel Pentium M processor 750

DISCUSSION Mao Yilu 4 participants 7 messages Apr 26, 2009 – Apr 30, 2009 4 messages not in the archive

lore
Share & tools
lore

Mao Yilu

author
#0 lore raw

Hi,

I masked all the interrupts except keyboard interrupt before the instruction “hlt”, So the CPU ran nothing until I click the keyboard button. And I used “rdtscll” and “do_gettimeofday” to get the halt time. But the result of “do_gettimeofday” was longer than the one of “rdtscll” about 3s per minute. I don’t know why. I timed some math job using the same way in contrary to the “hlt” instruction. The TSC was not correct either. In 3 minutes, the result of “do_gettimeofday” was longer than the one of “rdtscll” about 5s.
The processor is Intel Pentium M processor 750. From the software developer’s manual of Intel, the processor clock of Pentium M processors is impacted by Intel SpeedStep technology, while some other processors is not. Maybe this is another feature Pentium M processors own. Pentium M processors support 5 C-states. I am sure the TSC doesn’t stop in C0 and C1 states. But I am not sure about other states. Maybe other states will stop the clock, and “hlt” instruction will make the CPU into deeper state.
These are my guess. I wanna the truth. Thank you.

Mao Yilu

#1 lore raw
Quoted 10 lines · Mao Yilu

Hi,

I masked all the interrupts except keyboard interrupt before the instruction “hlt”, So the CPU ran nothing until I click the keyboard button. And I used “rdtscll” and “do_gettimeofday” to get the halt time. But the result of “do_gettimeofday” was longer than the one of “rdtscll” about 3s per minute. I don’t know why. I timed some math job using the same way in contrary to the “hlt” instruction. The TSC was not correct either. In 3 minutes, the result of “do_gettimeofday” was longer than the one of “rdtscll” about 5s.
The processor is Intel Pentium M processor 750. From the software developer’s manual of Intel, the processor clock of Pentium M processors is impacted by Intel SpeedStep technology, while some other processors is not. Maybe this is another feature Pentium M processors own. Pentium M processors support 5 C-states. I am sure the TSC doesn’t stop in C0 and C1 states. But I am not sure about other states. Maybe other states will stop the clock, and “hlt” instruction will make the CPU into deeper state.
These are my guess. I wanna the truth. Thank you.

Mao Yilu

On many processors the TSC will stop in various C-states, and also the TSC frequency changes when CPU frequency changes. This is why using rdtsc in userspace is not reliable, since the code can't know whether or not TSC can be used on that CPU reliably or how to scale the results.

author
#3 lore raw
In reply to a message not in the archive

Thank you for your reply.
But I still don't know why the TSC is not correct in the C1 state (hlt instruction). Is there anything more to influence the TSC? What happened when the CPU is not running under hlt instruction?

Thank you.
Mao Yilu

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Robert Hancock
Sent: Thursday, April 30, 2009 7:50 AM
To: Mao Yilu
Cc: [email protected]
Subject: Re: TSC unstable on Intel Pentium M processor 750

Quoted 10 lines · Mao Yilu

Hi,

I masked all the interrupts except keyboard interrupt before the instruction “hlt”, So the CPU ran nothing until I click the keyboard button. And I used “rdtscll” and “do_gettimeofday” to get the halt time. But the result of “do_gettimeofday” was longer than the one of “rdtscll” about 3s per minute. I don’t know why. I timed some math job using the same way in contrary to the “hlt” instruction. The TSC was not correct either. In 3 minutes, the result of “do_gettimeofday” was longer than the one of “rdtscll” about 5s.
The processor is Intel Pentium M processor 750. From the software developer’s manual of Intel, the processor clock of Pentium M processors is impacted by Intel SpeedStep technology, while some other processors is not. Maybe this is another feature Pentium M processors own. Pentium M processors support 5 C-states. I am sure the TSC doesn’t stop in C0 and C1 states. But I am not sure about other states. Maybe other states will stop the clock, and “hlt” instruction will make the CPU into deeper state.
These are my guess. I wanna the truth. Thank you.

Mao Yilu

On many processors the TSC will stop in various C-states, and also the TSC frequency changes when CPU frequency changes. This is why using rdtsc in userspace is not reliable, since the code can't know whether or not TSC can be used on that CPU reliably or how to scale the results. --
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#5 lore raw
In reply to a message not in the archive
Quoted 3 lines · Mao Yilu

But I still don't know why the TSC is not correct in the C1 state (hlt instruction). Is there anything more to influence the TSC? What happened when the CPU is not running under hlt instruction?

SMIs? Laptops love that crap...

Signature · 4 lines
  "One disk to rule them all, One disk to find them. One disk to bring
  them all and in the darkness grind them. In the Land of Redmond
  where the shadows lie." -- The Silicon Valley Tarot
  Henrique Holschuh
author
#7 lore raw
In reply to a message not in the archive
Quoted 9 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Henrique de Moraes Holschuh
Sent: Thursday, April 30, 2009 11:12 AM
To: Mao Yilu
Cc: 'Robert Hancock'; [email protected]
Subject: Re: TSC unstable on Intel Pentium M processor 750

Quoted 6 lines
Quoted 3 lines · Mao Yilu

But I still don't know why the TSC is not correct in the C1 state (hlt instruction). Is there anything more to influence the TSC? What happened when the CPU is not running under hlt instruction?

SMIs? Laptops love that crap...

What is SMIs?

#10 lore raw
In reply to a message not in the archive
Quoted 8 lines · Mao Yilu
Quoted 6 lines · Mao Yilu
Quoted 3 lines

But I still don't know why the TSC is not correct in the C1 state (hlt instruction). Is there anything more to influence the TSC? What happened when the CPU is not running under hlt instruction?

SMIs? Laptops love that crap...

What is SMIs?

http://en.wikipedia.org/wiki/System_Management_Mode

Signature · 4 lines
  "One disk to rule them all, One disk to find them. One disk to bring
  them all and in the darkness grind them. In the Land of Redmond
  where the shadows lie." -- The Silicon Valley Tarot
  Henrique Holschuh
#8 lore raw
In reply to Mao Yilu

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 9 lines · On Thu, 30 Apr 2009 15:40:02 +0800 "Mao Yilu" <[email protected]> wrote:
Quoted 9 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Henrique de Moraes Holschuh
Sent: Thursday, April 30, 2009 11:12 AM
To: Mao Yilu
Cc: 'Robert Hancock'; [email protected]
Subject: Re: TSC unstable on Intel Pentium M processor 750

Quoted 10 lines
Quoted 6 lines · Mao Yilu
Quoted 3 lines

But I still don't know why the TSC is not correct in the C1 state (hlt instruction). Is there anything more to influence the TSC? What happened when the CPU is not running under hlt instruction?

SMIs? Laptops love that crap...

What is SMIs?

System Management Interrupt. Usually handled by BIOS code and completely invisible to Linux.

Laptops and big servers (rackmount/blades) typically have tons of SMIs going off to do thermal management, statisics and remote management.

Clark
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.10 (GNU/Linux)

iEYEARECAAYFAkn5tpkACgkQHyuj/+TTEp1CjgCfZkG+/AU9CJrTSrk/+XVqPszS
4aoAoNgvDoLRMRUs1VSXqBRyg2HzPs6U
=drzY
-----END PGP SIGNATURE----- ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ¥Šwÿº{.nÇ+‰·¥Š{±þG«�éÿŠ{ayºʇڙë,j­¢f£¢·hš�ï�êÿ‘êçz_è®(­éšŽŠÝ¢j"�ú¶m§ÿÿ¾«þG«�éÿ¢¸?™¨è­Ú&£ø§~�á¶iO•æ¬z·švØ^¶m§ÿÿà ÿ¶ìÿ¢¸?–I¥