2.6.16-rc5: unreasonable temperature reported by w83627thf-isa-0290
Hi folks,
Configuring a barebone (Aopen MZ915-M) I tried the sensors stuff today. After running sensors-detect this is what sensors reports:
w83627thf-isa-0290
Adapter: ISA adapter
VCore: +1.36 V (min = +1.94 V, max = +1.94 V) ALARM
+12V: +12.28 V (min = +10.82 V, max = +13.19 V) +3.3V: +3.18 V (min = +3.14 V, max = +3.47 V) +5V: +4.93 V (min = +4.75 V, max = +5.25 V) -12V: -12.11 V (min = -13.18 V, max = -10.80 V) V5SB: +5.05 V (min = +4.76 V, max = +5.24 V) VBat: +3.10 V (min = +2.40 V, max = +3.60 V) fan1: 0 RPM (min = 664 RPM, div = 8) ALARM CPU Fan: 0 RPM (min = 664 RPM, div = 8) ALARM fan3: 0 RPM (min = 664 RPM, div = 8) ALARM M/B Temp: +7 C (high = +45 C, hyst = +101 C) sensor = diode CPU Temp: -5.5 C (high = +80 C, hyst = +75 C) sensor = diode temp3: +7.5 C (high = +80 C, hyst = +75 C) sensor = diode (beep)
alarms:beep_enable:
Sound alarm enabled
The voltage values seem to be the same as the bios displays. The min/max values of VCore doesn't seem right to me.
M/B and CPU temperatures are unreasonable. Not to mention the CPU fan. It is set to full speed in the bios.
Any ideas? Any help would be highly appreciated.
Regards
Harri
================================================================================
uname -a:
Linux bugs 2.6.16-rc5 #2 PREEMPT Sun Mar 5 16:22:06 CET 2006 i686 GNU/Linux
/proc/cpuinfo:
processor : 0vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 2.00GHz
stepping : 8
cpu MHz : 1995.371
cache size : 2048 KBfdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx est tm2
bogomips : 3995.04
Hallo Harald,
Quoted 18 lines · Harald Dunkel
Configuring a barebone (Aopen MZ915-M) I tried the sensors stuff today. After running sensors-detect this is what sensors reports:
w83627thf-isa-0290
Adapter: ISA adapter
VCore: +1.36 V (min = +1.94 V, max = +1.94 V) ALARM+12V: +12.28 V (min = +10.82 V, max = +13.19 V) +3.3V: +3.18 V (min = +3.14 V, max = +3.47 V) +5V: +4.93 V (min = +4.75 V, max = +5.25 V) -12V: -12.11 V (min = -13.18 V, max = -10.80 V) V5SB: +5.05 V (min = +4.76 V, max = +5.24 V) VBat: +3.10 V (min = +2.40 V, max = +3.60 V) fan1: 0 RPM (min = 664 RPM, div = 8) ALARM CPU Fan: 0 RPM (min = 664 RPM, div = 8) ALARM fan3: 0 RPM (min = 664 RPM, div = 8) ALARM M/B Temp: +7 C (high = +45 C, hyst = +101 C) sensor = diode CPU Temp: -5.5 C (high = +80 C, hyst = +75 C) sensor = diode temp3: +7.5 C (high = +80 C, hyst = +75 C) sensor = diode
Quoted 6 lines
alarms:
beep_enable:
Sound alarm enabledThe voltage values seem to be the same as the bios displays. The min/max values of VCore doesn't seem right to me.
You can just change these values to something more suitable. Edit /etc/sensors.conf, seek to the w83627thf-* section, edit the "set in0_min" and "set in0_max" lines.
Quoted 2 lines
M/B and CPU temperatures are unreasonable. Not to mention the CPU fan. It is set to full speed in the bios.
Does the BIOS report any speed for that fan? If so, what is the value?
The temperature values are admittedly strange. What temperature values does the BIOS report, if any?
Quoted 1 line
Any ideas? Any help would be highly appreciated.
Either your W83627THF chip needs some additional configuration (such as a different thermal sensor type selection), or you have another chip on the board handling fans and tempeartures.
Please provide the full output of sensors-detect. Also, let us know which version of lm_sensors you are using (sensors -v).
Note that you may want to follow-up on this on the lm-sensors list [1] rather than the LKML, which isn't really the place for user-space configuration issues.
[1] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
--
Jean Delvare