Scanner/webcam not working when connected to USB hub
Hello guys,
I have the following problem: if connected directly to my computer's USB ports, my webcam works correctly, but when connected through my 'AirVast' hub (124a:168b), it fails. The device is reported by lsusb (IDs correct), but it does not work. The worst is: I have tried using some proprietary OS, and it all worked there.
There are two possibilities (did I miss one?) I guess: either libusb is playing, or the kernel USB stack is.
Now, rather than giving work to others, I don't mind trying to find the problem myself, but I would appreciate a pointer to how to debug such a problem... Tools? Compilation options?
Cheers,
Hervé.
Kernel: 2.6.12 from Kubuntu
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0002
No power switching (usb 1.0)
Ganged overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0xf0
PortPwrCtrlMask 0x37
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0100 power
Port 3: 0000.0103 power enable connect
Quoted 7 lines · Herv? Fache
Hello guys,
I have the following problem: if connected directly to my computer's USB ports, my webcam works correctly, but when connected through my 'AirVast' hub (124a:168b), it fails. The device is reported by lsusb (IDs correct), but it does not work. The worst is: I have tried using some proprietary OS, and it all worked there.
Is it a USB 1.1 device connected to a USB 2.0 hub? If so, Linux currently has some issues with running properly for this setup. See the linux-usb-devel mailing list archives for some patches that some people have found to resolve this.
thanks,
greg k-h
Sorry I missed this important point in my message. You're right. I shall check the mailing lists you supplied and report success there if any.
Cheers,
Hervé.