Skip to contentSkip to conversation

freescale 8xx: which architecture to use ? ppc - powerpc ?

DISCUSSION Josef Angermeier 2 participants 2 messages Mar 27, 2006

lore
Share & tools
lore
#0 lore raw

Hello,

i want to run linux (2.6.15) on my MPC875 board. I wonder which architecture to choose: "powerpc" or "ppc" ? - menuconfig shows a "freescale 8xx" option when used with "powerpc", and a "8xx" option when used with ARCH=ppc. Because i use a embedded freescale 8xx i wanted to use the "powerpc" architecture. BUT: i seems to be unstable, i got some undefined referencies. Or am i wrong ?

thanks
Josef

#1 lore raw
Quoted 9 lines · On Mon, 27 Mar 2006 15:20:19 +0200 Josef Angermeier…

Hello,

i want to run linux (2.6.15) on my MPC875 board. I wonder which architecture to choose: "powerpc" or "ppc" ? - menuconfig shows a "freescale 8xx" option when used with "powerpc", and a "8xx" option when used with ARCH=ppc. Because i use a embedded freescale 8xx i wanted to use the "powerpc" architecture. BUT: i seems to be unstable, i got some undefined referencies. Or am i wrong ?

You should use ppc for now. Work to move the 8xx stuff to the powerpc is ongoing, but quite far from complete state as you see...

Quoted 9 lines

thanks
Josef
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Signature · 2 lines
Sincerely, 
Vitaly