Skip to contentSkip to conversation

LVM data recovery ?

linux-lvm Miguel Bettencourt Dias (Netopia) 2 participants 3 messages Mar 29, 2006 – Mar 30, 2006

lore
Share & tools
lore
#0 lore raw

Hi All,

I've been reading the arquives and didn't find an answer to my problem and I was wondering how data recovery could be done... because I have a server that crashed quite badly. It did not have lvm backups from /etc/lvm/archive/ and I wanted to recover the LVM.

I only have two partitions, sda1 and sda2.
sda1 is the /boot. sda2 is LVM, with swap and / (the machine runs fedora core 4)with root inside the LVM... now I know that's a bad ideia.

The problem is that I don't have any backups of any LVM information and all I know is the size of the partitions inside LVM...

Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k

Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/VolGroup00-LogVol00

                      32963596  24207464   8756132  74% /

/dev/sda1 101086 56597 39270 60% /boot
/dev/shm 1037328 0 1037328 0% /dev/shm

can I conceivably recover the data ? how ?

regards,
miguel dias

begin:vcard
fn:Miguel Bettencourt de Freitas Dias
n:Bettencourt de Freitas Dias;Miguel org;quoted-printable:Netopia, Sistemas de Informa=C3=A7=C3=A3o Global, Lda. adr:;;Apartado 42111;Lisboa;;1601-801 Lisboa;Portugal email;internet:[email protected]
tel;work:+351917245758
tel;fax:+35166917245758
tel;cell:+351917245758
url:http://www.netopia.pt
version:2.1
end:vcard

#1 lore raw

You may be able to mount the LVM LV's on another system....

I'd take some dd backups just in case, and then try attaching the drives to another system.

pvscan to see if it finds the PV's
then vgscan to find the VG's

vgchange -a y will then activate them...but be careful. If the same VG/LV names are present on the new system, you'll have to use some renaming trickery to get them to actually show up.

Thanks,

Tom Callahan
TESSCO Technologies
Desk: (410)-229-1361
Cell: (410)-588-7605
Email: [email protected]

A real engineer only resorts to documentation when the keyboard dents on the forehead get too noticeable.

Quoted 34 lines · Miguel Bettencourt Dias (Netopia)

Hi All,

I've been reading the arquives and didn't find an answer to my problem and I was wondering how data recovery could be done... because I have a server that crashed quite badly. It did not have lvm backups from /etc/lvm/archive/ and I wanted to recover the LVM.

I only have two partitions, sda1 and sda2.
sda1 is the /boot. sda2 is LVM, with swap and / (the machine runs fedora core 4)with root inside the LVM... now I know that's a bad ideia.

The problem is that I don't have any backups of any LVM information and all I know is the size of the partitions inside LVM...

Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k

Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/VolGroup00-LogVol00

                      32963596  24207464   8756132  74% /

/dev/sda1 101086 56597 39270 60% /boot
/dev/shm 1037328 0 1037328 0% /dev/shm

can I conceivably recover the data ? how ?

regards,
miguel dias

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

#2 lore raw

Hi, thanks for your feedback.

Unfortunately I get a metadata checksum error. Would there be a way to recreate the metadata, telling it the number of "partitions" and the size of both ? Just like I could with fdisk... without "touching" the underlying reiserfs ?

regards,
miguel dias

Quoted 59 lines · Tom Callahan

You may be able to mount the LVM LV's on another system....

I'd take some dd backups just in case, and then try attaching the drives to another system.

pvscan to see if it finds the PV's
then vgscan to find the VG's

vgchange -a y will then activate them...but be careful. If the same VG/LV names are present on the new system, you'll have to use some renaming trickery to get them to actually show up.

Thanks,

Tom Callahan
TESSCO Technologies
Desk: (410)-229-1361
Cell: (410)-588-7605
Email: [email protected]

A real engineer only resorts to documentation when the keyboard dents on the forehead get too noticeable.

Quoted 28 lines · Miguel Bettencourt Dias (Netopia)

Hi All,

I've been reading the arquives and didn't find an answer to my problem and I was wondering how data recovery could be done... because I have a server that crashed quite badly. It did not have lvm backups from /etc/lvm/archive/ and I wanted to recover the LVM.

I only have two partitions, sda1 and sda2.
sda1 is the /boot. sda2 is LVM, with swap and / (the machine runs fedora core 4)with root inside the LVM... now I know that's a bad ideia.

The problem is that I don't have any backups of any LVM information and all I know is the size of the partitions inside LVM...

Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k

Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/VolGroup00-LogVol00

                      32963596  24207464   8756132  74% /

/dev/sda1 101086 56597 39270 60% /boot
/dev/shm 1037328 0 1037328 0% /dev/shm

can I conceivably recover the data ? how ?

regards,
miguel dias

Quoted 6 lines

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

Quoted 5 lines

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

begin:vcard
fn:Miguel Bettencourt de Freitas Dias
n:Bettencourt de Freitas Dias;Miguel org;quoted-printable:Netopia, Sistemas de Informa=C3=A7=C3=A3o Global, Lda. adr:;;Apartado 42111;Lisboa;;1601-801 Lisboa;Portugal email;internet:[email protected]
tel;work:+351917245758
tel;fax:+35166917245758
tel;cell:+351917245758
url:http://www.netopia.pt
version:2.1
end:vcard