Skip to contentSkip to conversation

question about Linux 2.6 with Xilinx ML-403

DISCUSSION Grant Likely 2 participants 7 messages Apr 7, 2006 – May 2, 2006 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 9 lines · yding

HI, Grant,

I found this message :
http://patchwork.ozlabs.org/linuxppc/patch?id=3D3841 on Internet.
It looks like you created some patch files for supporting Linux 2.6 with
Xilinx ML-403.

how can download the whole kernel source tree with your patched files (vi=

a

Quoted 1 line

cvs or bitkeeper) ?

I believe they are now in Linus' mainline git tree. If not, they are in Paul's powerpc git tree.

BTW, please CC the linuxppc-embedded mailing list when emailing me directly= .

Cheers,
g.
--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
(403) 399-0195

#2 lore raw

Hi, Grant,

Thanks for the information.

I just checked out Linus's GIT tree from rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git linux-2.6.

Where is the location for Paul's GIT tree ? Just curious ...

Best Regards,
--
Ying Ding

Quoted 30 lines · Grant Likely
Quoted 12 lines · yding

HI, Grant,

I found this message :
http://patchwork.ozlabs.org/linuxppc/patch?id=3841 on Internet.
It looks like you created some patch files for supporting Linux 2.6 with Xilinx ML-403.

how can download the whole kernel source tree with your patched files (via cvs or bitkeeper) ?

I believe they are now in Linus' mainline git tree. If not, they are in Paul's powerpc git tree.

BTW, please CC the linuxppc-embedded mailing list when emailing me directly.

Cheers,
g.
--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
(403) 399-0195

#3 lore raw
Quoted 5 lines · yding

I just checked out Linus's GIT tree from
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git linux-2.6.

Where is the location for Paul's GIT tree ? Just curious ...

rsync://rsync.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc.git

g.

--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
(403) 399-0195

#4 lore raw

HI, Grant,

I downloaded Paul's git tree as you suggested.

It seems that the defconfig for ML-403(in Patch [9/9]:
http://patchwork.ozlabs.org/linuxppc/patch?id=4226 ), the tri-mode Ethernet MAC on Virtex-4 FX12 on the ML-403 board was disabled.

Is this Ethernet device supported by this patch ?

Thanks.
--
Ying Ding

Quoted 22 lines · Grant Likely
Quoted 7 lines · yding

I just checked out Linus's GIT tree from rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git linux-2.6.

Where is the location for Paul's GIT tree ? Just curious ...

rsync://rsync.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc.git

g.

--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
(403) 399-0195

#5 lore raw
Quoted 1 line · yding

Is this Ethernet device supported by this patch ?

No, sorry. I'm still trying to get permission to release it (it's internal only at the moment)

g.

--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
(403) 399-0195

#6 lore raw
In reply to Grant Likely

HI, Grant,

It looks like that the patch for ML-403 in Linux 2.6.17 kernel(I downloaded from Linus git tree) does not have the directory :
./arch/ppc/platform/4xx/xilinx_ocp like the one in the 2.4.30 kernel.

And also, I saw this thread: "Migrate Xilinx Vertex support from the OCP bus to the platfom bus"

    http://patchwork.ozlabs.org/linuxppc/patch?id=3933

Does it mean all of onchip peripherals for Virtex-4 FX must reside on the PLB bus instead of OPB (OCB) bus ?
(i.e. during the process of creating the ref design for Linux using Xilinx Platform studio, I have to select PLB peripherals instead of OPB peripherals. Is is correct ?)

BTW, do you have a sample ref design for ML-403 board for Xilinx Platform studio ?

Thanks for the help.
--
Ying Ding

Quoted 30 lines · Grant Likely
Quoted 12 lines · yding

HI, Grant,

I found this message :
http://patchwork.ozlabs.org/linuxppc/patch?id=3841 on Internet.
It looks like you created some patch files for supporting Linux 2.6 with Xilinx ML-403.

how can download the whole kernel source tree with your patched files (via cvs or bitkeeper) ?

I believe they are now in Linus' mainline git tree. If not, they are in Paul's powerpc git tree.

BTW, please CC the linuxppc-embedded mailing list when emailing me directly.

Cheers,
g.
--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
(403) 399-0195

#7 lore raw
Quoted 3 lines · yding

HI, Grant,

It looks like that the patch for ML-403 in Linux 2.6.17 kernel(I downloa=

ded

Quoted 3 lines

from Linus git tree) does not have the directory :
./arch/ppc/platform/4xx/xilinx_ocp like the one in the 2.4.30 kernel.

That's right. AFAIK, The 2.6 kernel is not yet supported by the Xilinx EDK tools; and so it cannot generate a 2.6 BSP. If you want to use the generated BSP; use the montavista 2.4 kernel.

Quoted 5 lines

And also, I saw this thread: "Migrate Xilinx Vertex support from the OCP
bus to the platfom bus"

http://patchwork.ozlabs.org/linuxppc/patch?id=3D3933
Does it mean all of onchip peripherals for Virtex-4 FX must reside on th=

e

Quoted 1 line

PLB bus instead of OPB (OCB) bus ?

No. Platform bus is a Linux construct to make it simpler to handle "directly attached" devices. ie. Anything that the processor can access directly w/o PCI et all. OPB and PLB devices are both 'platform' devices in Linux 2.6 terminology.

Quoted 1 line

(i.e. during the process of creating the ref design for Linux using Xili=

nx

Quoted 2 lines

Platform studio, I have to select PLB peripherals instead of OPB peripherals. Is is correct ?)

No, use whatever peripherals you want (either PLB, or OPB). Just be prepared to port device drivers for anything beyond a serial port.

Quoted 2 lines

BTW, do you have a sample ref design for ML-403 board for Xilinx Platfor=

m

Quoted 1 line

studio ?

Why not use the ref design that Xilinx provides? (I have a number of designs that work; but most of the time I use the ML403 ref design because I know it's proven)

Cheers,
g.

--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
(403) 399-0195