PCI device driver writing newbie trouble
Hi All,
I'm attempting to write a PCI device driver. I've read chapters 2, 9 and 12 of the linux device driver book (3rd ed) and it got me going with the code below. However, I never see the message printed from cif50_probe, so appearantly the kernel doesn't consider my driver the correct driver for the hardware.
I tried to load the driver with insmod, but I also rebooted the system in the hope that some part of the kernel would find the hardware and try to load my driver. Is that how it is supposed to work? At least my driver is listed in /lib/modules/2.6.15.7/modules.pcimap. Modprobe doesn't find it, I don't know why. The hardware contains a PLX chip. The hardware is found by the kernel, as it correctly shows up in /proc/pci:
Bus 1, device 13, function 0:
Class 0680: PCI device 10b5:9050 (rev 1).
IRQ 5.
Non-prefetchable 32 bit memory at 0xd1005000 [0xd100507f].
I/O at 0xd100 [0xd17f].
Non-prefetchable 32 bit memory at 0xd1000000 [0xd1001fff].Also in the corresponding /sys files.
Does anyone have a suggestion why my probe function is not being called?
TIA
Bert
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>MODULE_LICENSE("Dual BSD/GPL");
static const struct pci_device_id cif50_ids[] = {
{
.vendor = 0x10B5,
.device = 0x9050,
.subvendor = PCI_ANY_ID, //0x10B5,
.subdevice = PCI_ANY_ID, //0x1080,
.class = PCI_ANY_ID,
.class_mask = PCI_ANY_ID
},
{ 0 }
};MODULE_DEVICE_TABLE(pci,cif50_ids);
int cif50_probe(struct pci_dev *dev, const struct pci_device_id *id) {
printk("<1>Joehoe, de kernel wil me een PCI device geven!\n"); return -1;
}
void cif50_remove(struct pci_dev *dev)
{
}
static struct pci_driver pci_driver = {
.name = "cif50pb",
.id_table = cif50_ids,
.probe = cif50_probe,
.remove = cif50_remove,
};static int hello_init(void)
{
printk("<1>Hello, world\n");
return pci_register_driver(&pci_driver);
}
static void hello_exit(void)
{
printk("<1>Goodbye cruel world\n");
pci_unregister_driver(&pci_driver);
}module_init(hello_init);module_exit(hello_exit);
Quoted 34 lines · Bert Thomas
Hi All,
I'm attempting to write a PCI device driver. I've read chapters 2, 9 and 12 of the linux device driver book (3rd ed) and it got me going with the code below. However, I never see the message printed from
cif50_probe, so appearantly the kernel doesn't consider my driver the correct driver for the hardware.I tried to load the driver with insmod, but I also rebooted the system in the hope that some part of the kernel would find the hardware and try to load my driver. Is that how it is supposed to work? At least my driver is listed in
/lib/modules/2.6.15.7/modules.pcimap. Modprobe doesn't find it, I don't know why. The hardware contains a PLX chip. The hardware is found by the kernel, as it correctly shows up in/proc/pci:Bus 1, device 13, function 0:
Class 0680: PCI device 10b5:9050 (rev 1). IRQ 5. Non-prefetchable 32 bit memory at 0xd1005000 [0xd100507f]. I/O at 0xd100 [0xd17f]. Non-prefetchable 32 bit memory at 0xd1000000 [0xd1001fff].Also in the corresponding /sys files.
Does anyone have a suggestion why my probe function is not being called?
TIA
Bert#include <
linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>MODULE_LICENSE("Dual BSD/GPL");
Quoted 9 lines
static const struct pci_device_id cif50_ids[] = {
{
.vendor = 0x10B5,
.device = 0x9050,
.subvendor = PCI_ANY_ID, //0x10B5,
.subdevice = PCI_ANY_ID, //0x1080,
.class = PCI_ANY_ID,
.class_mask = PCI_ANY_ID
},Try the PCI_DEVICE() macro here instead.
But that should not matter, this should work, I don't know why it doesn't sorry.
greg k-h
Quoted 9 lines · Bert Thomas
Quoted 9 lines
static const struct pci_device_id cif50_ids[] = { { .vendor = 0x10B5, .device = 0x9050, .subvendor = PCI_ANY_ID, //0x10B5, .subdevice = PCI_ANY_ID, //0x1080, .class = PCI_ANY_ID, .class_mask = PCI_ANY_ID },
Quoted 4 lines · Greg KH
Try the
PCI_DEVICE()macro here instead.But that should not matter, this should work, I don't know why it doesn't sorry.
No device class will ever match the above class and class_mask. Changing them to zero makes it work according to Bert.
Pekka
Quoted 11 lines · Pekka Enberg
Quoted 9 lines · Bert Thomas
Quoted 9 lines
static const struct pci_device_id cif50_ids[] = { { .vendor = 0x10B5, .device = 0x9050, .subvendor = PCI_ANY_ID, //0x10B5, .subdevice = PCI_ANY_ID, //0x1080, .class = PCI_ANY_ID, .class_mask = PCI_ANY_ID },
Quoted 8 lines
Quoted 4 lines · Greg KH
Try the
PCI_DEVICE()macro here instead.But that should not matter, this should work, I don't know why it doesn't sorry.
No device class will ever match the above class and
class_mask. Changing them to zero makes it work according to Bert.
Ah, yeah, that would work, good catch. If you used the PCI_DEVICE() macro, it would have also worked :)
thanks,
greg k-h