Skip to contentSkip to conversation

Unable to receive multicast stream

DISCUSSION Andrew Athan 3 participants 3 messages Apr 20, 2006

lore
Share & tools
lore
#0 lore raw

The simple UDP multicast receive application below, adapted from source on IBM's web site, will not receive any data. While it is blocked on recv():

hfclinux2:/home/root/UDP/apps/Crosser2# netstat -ang
IPv6/IPv4 Group Memberships
Interface       RefCnt Group
--------------- ------ ---------------------
lo              1      224.0.0.1
eth0            1      224.0.0.1
eth1            1      224.0.17.44
eth1            1      224.0.0.1
lo              1      ff02::1
eth0            1      ff02::1:ffdd:eb2b
eth0            1      ff02::1
eth1            1      ff02::1:ffdd:eb2c
eth1            1      ff02::1

And tcpdump shows traffic arriving at the interface(see below)! This leads me to belive the kernel is filtering it, and or not delivering it to the socket.

The one "strange" thing about this network is that the traffic is flowing in "dense mode", meaning there is no explicit need for IGMP messaging (nor any response to such messaging).

Can anyone point me in the right direction regarding why the socket never receives any data????

Thanks.
Andrew

hfclinux2:/home/root/UDP/apps/Crosser2# uname -a
Linux hfclinux2 2.6.15.1smp #6 SMP PREEMPT Mon Feb 13 11:38:32 EST 2006 i686 GNU/Linux
hfclinux2:/home/root/UDP/apps/Crosser2# tcpdump -i eth1 port 55300
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth1, link-type EN10MB (Ethernet), capture size 96 bytes
12:54:06.980000 IP 206.200.5.144.2232 > 224.0.17.44.55300: UDP, length 91
12:54:07.079675 IP 206.200.5.144.2232 > 224.0.17.44.55300: UDP, length 46
12:54:07.179869 IP 206.200.5.144.2232 > 224.0.17.44.55300: UDP, length 181
12:54:07.280437 IP 206.200.5.144.2232 > 224.0.17.44.55300: UDP, length 181
12:54:07.380005 IP 206.200.5.144.2232 > 224.0.17.44.55300: UDP, length 181
12:54:07.480073 IP 206.200.5.144.2232 > 224.0.17.44.55300: UDP, length 136
12:54:07.680459 IP 206.200.5.144.2232 > 224.0.17.44.55300: UDP, length 91
12:54:07.780277 IP 206.200.5.144.2232 > 224.0.17.44.55300: UDP, length 136
hfclinux2:/home/root/UDP/apps/Crosser2# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:11:43:DD:EB:2B
         inet addr:172.22.71.128  Bcast:172.22.71.255  Mask:255.255.255.0
         inet6 addr: fe80::211:43ff:fedd:eb2b/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:19540 errors:0 dropped:0 overruns:0 frame:0
         TX packets:7838 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:1563190 (1.4 MiB)  TX bytes:1943895 (1.8 MiB)
         Base address:0xdcc0 Memory:dfae0000-dfb00000

eth0:1 Link encap:Ethernet HWaddr 00:11:43:DD:EB:2B

         inet addr:10.61.6.128  Bcast:10.61.6.255  Mask:255.255.255.0
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         Base address:0xdcc0 Memory:dfae0000-dfb00000

eth0:2 Link encap:Ethernet HWaddr 00:11:43:DD:EB:2B

         inet addr:196.0.34.11  Bcast:196.0.34.255  Mask:255.255.255.0
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         Base address:0xdcc0 Memory:dfae0000-dfb00000

eth0:3 Link encap:Ethernet HWaddr 00:11:43:DD:EB:2B

         inet addr:192.168.254.128  Bcast:192.168.254.255  

Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Base address:0xdcc0 Memory:dfae0000-dfb00000

eth1 Link encap:Ethernet HWaddr 00:11:43:DD:EB:2C

         inet addr:192.168.250.128  Bcast:192.168.250.255  
Mask:255.255.255.0
         inet6 addr: fe80::211:43ff:fedd:eb2c/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:137717 errors:0 dropped:0 overruns:0 frame:0
         TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:58314262 (55.6 MiB)  TX bytes:1596 (1.5 KiB)
         Base address:0xccc0 Memory:df8e0000-df900000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

-------------------------
#include <sys/types.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#include <netinet/in.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>

using namespace std;

struct sockaddr_in localSock;
struct ip_mreqn group;

int                   sd;
int                   datalen;
char                  databuf[10];

int main (int argc, char *argv[])
{
sd = socket(AF_INET, SOCK_DGRAM, 0);
if (sd < 0) {
perror("opening datagram socket");
exit(1);
}

{
int reuse=1;

if (setsockopt(sd, SOL_SOCKET, SO_REUSEADDR,

                  (char *)&reuse, sizeof(reuse)) < 0) {
     perror("setting SO_REUSEADDR");
     close(sd);
     exit(1);

}
}

memset((char *) &localSock, 0, sizeof(localSock)); localSock.sin_family = AF_INET; localSock.sin_port = htons(55300);; localSock.sin_addr.s_addr = INADDR_ANY;

if (bind(sd, (struct sockaddr*)&localSock, sizeof(localSock))) {
perror("binding datagram socket");
close(sd);
exit(1);
}

group.imr_multiaddr.s_addr = inet_addr("224.0.17.44"); printf("%d\n",group.imr_multiaddr.s_addr); group.imr_address.s_addr = inet_addr("192.168.250.128"); if (setsockopt(sd, IPPROTO_IP, IP_ADD_MEMBERSHIP,

                (char *)&group, sizeof(group)) < 0) {

perror("adding multicast group");
close(sd);
exit(1);
}
/*
* Read from the socket.
*/
datalen = sizeof(databuf);
if (read(sd, databuf, datalen) < 0) {
perror("reading datagram message");
close(sd);
exit(1);
} else {
puts("success reading");
}
}

#2 lore raw
In reply to Andrew Athan
Quoted 169 lines · Andrew Athan

The simple UDP multicast receive application below, adapted from source on IBM's web site, will not receive any data. While it is blocked on recv():

hfclinux2:/home/root/UDP/apps/Crosser2# netstat -ang
IPv6/IPv4 Group Memberships
Interface       RefCnt Group
--------------- ------ ---------------------
lo              1      224.0.0.1
eth0            1      224.0.0.1
eth1            1      224.0.17.44
eth1            1      224.0.0.1
lo              1      ff02::1
eth0            1      ff02::1:ffdd:eb2b
eth0            1      ff02::1
eth1            1      ff02::1:ffdd:eb2c
eth1            1      ff02::1

And tcpdump shows traffic arriving at the interface(see below)! This leads me to belive the kernel is filtering it, and or not delivering it to the socket.

The one "strange" thing about this network is that the traffic is flowing in "dense mode", meaning there is no explicit need for IGMP messaging (nor any response to such messaging).

Can anyone point me in the right direction regarding why the socket never receives any data????

Thanks.
Andrew

hfclinux2:/home/root/UDP/apps/Crosser2# uname -a
Linux hfclinux2 2.6.15.1smp #6 SMP PREEMPT Mon Feb 13 11:38:32 EST 2006
i686 GNU/Linux
hfclinux2:/home/root/UDP/apps/Crosser2# tcpdump -i eth1 port 55300
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth1, link-type EN10MB (Ethernet), capture size 96 bytes
12:54:06.980000 IP 206.200.5.144.2232 > 224.0.17.44.55300: UDP, length 91
12:54:07.079675 IP 206.200.5.144.2232 > 224.0.17.44.55300: UDP, length 46
12:54:07.179869 IP 206.200.5.144.2232 > 224.0.17.44.55300: UDP, length 181
12:54:07.280437 IP 206.200.5.144.2232 > 224.0.17.44.55300: UDP, length 181
12:54:07.380005 IP 206.200.5.144.2232 > 224.0.17.44.55300: UDP, length 181
12:54:07.480073 IP 206.200.5.144.2232 > 224.0.17.44.55300: UDP, length 136
12:54:07.680459 IP 206.200.5.144.2232 > 224.0.17.44.55300: UDP, length 91
12:54:07.780277 IP 206.200.5.144.2232 > 224.0.17.44.55300: UDP, length 136
hfclinux2:/home/root/UDP/apps/Crosser2# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:11:43:DD:EB:2B
         inet addr:172.22.71.128  Bcast:172.22.71.255  Mask:255.255.255.0
         inet6 addr: fe80::211:43ff:fedd:eb2b/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:19540 errors:0 dropped:0 overruns:0 frame:0
         TX packets:7838 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:1563190 (1.4 MiB)  TX bytes:1943895 (1.8 MiB)
         Base address:0xdcc0 Memory:dfae0000-dfb00000

eth0:1 Link encap:Ethernet HWaddr 00:11:43:DD:EB:2B

         inet addr:10.61.6.128  Bcast:10.61.6.255  Mask:255.255.255.0
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         Base address:0xdcc0 Memory:dfae0000-dfb00000

eth0:2 Link encap:Ethernet HWaddr 00:11:43:DD:EB:2B

         inet addr:196.0.34.11  Bcast:196.0.34.255  Mask:255.255.255.0
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         Base address:0xdcc0 Memory:dfae0000-dfb00000

eth0:3 Link encap:Ethernet HWaddr 00:11:43:DD:EB:2B

         inet addr:192.168.254.128  Bcast:192.168.254.255

Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Base address:0xdcc0 Memory:dfae0000-dfb00000

eth1 Link encap:Ethernet HWaddr 00:11:43:DD:EB:2C

         inet addr:192.168.250.128  Bcast:192.168.250.255
Mask:255.255.255.0
         inet6 addr: fe80::211:43ff:fedd:eb2c/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:137717 errors:0 dropped:0 overruns:0 frame:0
         TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:58314262 (55.6 MiB)  TX bytes:1596 (1.5 KiB)
         Base address:0xccc0 Memory:df8e0000-df900000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

-------------------------
#include <sys/types.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#include <netinet/in.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>

using namespace std;

struct sockaddr_in localSock;
struct ip_mreqn group;

int                   sd;
int                   datalen;
char                  databuf[10];

int main (int argc, char *argv[])
{
sd = socket(AF_INET, SOCK_DGRAM, 0);

 if (sd < 0) {
   perror("opening datagram socket");
   exit(1);

}

 {
   int reuse=1;

   if (setsockopt(sd, SOL_SOCKET, SO_REUSEADDR,
                  (char *)&reuse, sizeof(reuse)) < 0) {
     perror("setting SO_REUSEADDR");
     close(sd);
     exit(1);
   }

}

memset((char *) &localSock, 0, sizeof(localSock)); localSock.sin_family = AF_INET; localSock.sin_port = htons(55300);; localSock.sin_addr.s_addr = INADDR_ANY;

 if (bind(sd, (struct sockaddr*)&localSock, sizeof(localSock))) {
   perror("binding datagram socket");
   close(sd);
   exit(1);

}

group.imr_multiaddr.s_addr = inet_addr("224.0.17.44"); printf("%d\n",group.imr_multiaddr.s_addr); group.imr_address.s_addr = inet_addr("192.168.250.128"); if (setsockopt(sd, IPPROTO_IP, IP_ADD_MEMBERSHIP,

                (char *)&group, sizeof(group)) < 0) {
   perror("adding multicast group");
   close(sd);
   exit(1);
 }
 /*
  * Read from the socket.
  */
 datalen = sizeof(databuf);
 if (read(sd, databuf, datalen) < 0) {
   perror("reading datagram message");
   close(sd);
   exit(1);
 } else {
   puts("success reading");
Quoted 2 lines

}
}

12:54:07.780277 IP 206.200.5.144.2232 > 224.0.17.44.55300: UDP, length 136

                                                            ^^^___ datagram

Question? Don't you need to use:

     socklen_t slen = sizeof(localSock);
     recvfrom(sd, databuf, datalen, &localSock, &slen);

... to receive a datagram?

Cheers,
Dick Johnson
Penguin : Linux version 2.6.16.4 on an i686 machine (5592.89 BogoMips). Warning : 98.36% of all statistics are fiction, book release in April. _


****************************************************************
The information transmitted in this message is confidential and may be privileged. Any review, retransmission, dissemination, or other use of this information by persons or entities other than the intended recipient is prohibited. If you are not the intended recipient, please notify Analogic Corporation immediately - by replying to this message or by sending an email to [email protected] - and destroy all copies of this information, including any attachments, without reading or disclosing them.

Thank you.