make O="<dir>" install; output not relocated; 2.6.16.11(kbuild)
From "make help", the "O=" param to make is said to
'Locate all output files in "dir", including .config'
I first did:
"make O=$PWD/root bzImage modules" # (Note: PWD=/usr/src/ast-261611)
That worked w/no apparent problems.
I wanted the output of "make install modules_install" placed in a working directory (for transfer to the target system).
Instead, it appears the "O=" parameter is _partially_ ignored.
It is used for the "input" to the "make install" and the "make modules_install", but seems to be ignored for "output":
ishtar:/usr/src/ast-261611> make V=1 O=$PWD/root modules_install
make -C /usr/src/ast-261611/root \
KBUILD_SRC=/usr/src/ast-261611 \
KBUILD_EXTMOD="" -f /usr/src/ast-261611/Makefile modules_install
mkdir: cannot create directory `/lib/modules/2.6.16.11-astarte':
Permission denied
make[1]: *** [_modinst_] Error 1
make: *** [modules_install] Error 2
ishtar:/usr/src/ast-261611> make V=1 O=$PWD/root install
make -C /usr/src/ast-261611/root \
KBUILD_SRC=/usr/src/ast-261611 \
KBUILD_EXTMOD="" -f /usr/src/ast-261611/Makefile install make -f /usr/src/ast-261611/scripts/Makefile.build
obj=arch/i386/boot BOOTIMAGE=arch/i386/boot/bzImage install
sh /usr/src/ast-261611/arch/i386/boot/install.sh 2.6.16.11-astarte
arch/i386/boot/bzImage System.map "/boot"
ln: cannot remove `/boot/vmlinuz': Permission denied
rm: cannot remove `/boot/System.map': Permission denied
cp: cannot create regular file `/boot/vmlinuz-2.6.16.11-astarte':
Permission denied
cp: cannot create regular file
`/boot/System.map-2.6.16.11-astarte': Permission denied
ln: cannot remove `/boot/vmlinuz': Permission denied You may need to create an initial ramdisk now.
----
Is this a bug or a feature? I.e. is the "make help" misleading in
saying "O=<dir>" can be used to specify the output directory of a make run? Or should this be working?
Thanks,
Linda'
Quoted 5 lines · Linda Walsh
From "make help", the "O=" param to make is said to
'Locate all output files in "dir", including .config'I first did:
"make O=$PWD/root bzImage modules" # (Note: PWD=/usr/src/ast-261611)
[...]
Quoted 3 lines
Instead, it appears the "O=" parameter is _partially_ ignored.
ishtar:/usr/src/ast-261611> make V=1 O=$PWD/root
modules_install
The modules_install target uses O= for its _input_ files (that is, for the readily compiled modules) and outputs to $(INSTALL_MOD_PATH)/lib/modules/$VERSION/ . So you may want to set $(INSTALL_MOD_PATH) in the same way as you've set V= or O= before.
If you're trying to prepare something to be copied over to a target system, the tar-pkg, targz-pkg and tarbz2-pkg targets may be exactly what you're searching for.
Quoted 1 line
Is this a bug or a feature? I.e. is the "make help" misleading in
Feature. Modules won't ever be searched inside some kernel source directory, modprobe expects them to be in /lib/modules/.
Quoted 2 lines
saying "O=<dir>" can be used to specify the output directory of a make run? Or should this be working?
It's maybe a bit misleading, but `modules_install' isn't a compilation run, it's an installation run. O= was ment to hold all compiled/generated objects, but to have a working installation, you need to break out of that (or have INSTALL_MOD_PATH set.)
MfG, JBG
Signature · 4 lines
Jan-Benedict Glaw [email protected] . +49-172-7608481 _ O _ "Eine Freie Meinung in einem Freien Kopf | Gegen Zensur | Gegen Krieg _ _ O für einen Freien Staat voll Freier Bürger" | im Internet! | im Irak! O O O ret = do_actions((curr | FREE_SPEECH) & ~(NEW_COPYRIGHT_LAW | DRM | TCPA));
Quoted 9 lines · Jan-Benedict Glaw
The
modules_installtarget uses O= for its _input_ files (that is, for the readily compiled modules) and outputs to $(INSTALL_MOD_PATH)/lib/modules/$VERSION/ . So you may want to set $(INSTALL_MOD_PATH) in the same way as you've set V= or O= before.If you're trying to prepare something to be copied over to a target system, the tar-pkg, targz-pkg and tarbz2-pkg targets may be exactly what you're searching for.
Quite possibly. What about an installed kernel (apart from the modules)? Will the kernel image and map, etc, get installed into the "INSTALL_MOD_PATH" as well? It doesn't sound, intuitively, to be so from the environment variable name.
Quoted 5 lines
It's maybe a bit misleading, but `modules_install' isn't a compilation run, it's an installation run. O= was ment to hold all compiled/generated objects, but to have a working installation, you need to break out of that (or have
INSTALL_MOD_PATHset.)
---
Fair enough, but I'm more interested in where to specify
the target location of the installed kernel and System.map as I don't always have modules for a generated kernel, but usually (near 100% :-)) have an installable kernel image. For development, I could see it being useful to mount the target system's root in a local directory (like /mnt), then have the kernel build install to a target root of "/mnt".
Tnx,
Linda
Quoted 6 lines · Linda Walsh
Quoted 5 lines · Jan-Benedict Glaw
The
modules_installtarget uses O= for its _input_ files (that is, for the readily compiled modules) and outputs to $(INSTALL_MOD_PATH)/lib/modules/$VERSION/ . So you may want to set $(INSTALL_MOD_PATH) in the same way as you've set V= or O= before.
Quoted 7 lines
Quoted 4 lines
If you're trying to prepare something to be copied over to a target system, the tar-pkg, targz-pkg and tarbz2-pkg targets may be exactly what you're searching for.
Quite possibly. What about an installed kernel (apart from the modules)? Will the kernel image and map, etc, get installed into the "
INSTALL_MOD_PATH" as well? It doesn't sound, intuitively,
`make modules_install' will never ever end up installing the kernel image or the System.map or any other architecture-specific boot images. It'll install the modules, nothing more.
The packaging scripts OTOH will of course also take that stuff.
Quoted 6 lines
to be so from the environment variable name.
Quoted 4 lines
It's maybe a bit misleading, but `modules_install' isn't a compilation run, it's an installation run. O= was ment to hold all compiled/generated objects, but to have a working installation, you need to break out of that (or have
INSTALL_MOD_PATHset.)
Quoted 7 lines
Fair enough, but I'm more interested in where to specify
the target location of the installed kernel and System.map as I don't always have modules for a generated kernel, but usually (near 100% :-)) have an installable kernel image. For development, I could see it being useful to mount the target system's root in a local directory (like /mnt), then have the kernel build install to a target root of "/mnt".
Installing the kernel image is quite architecture specific; most architectures use $(INSTALL_PATH), so this could be something like /path/to/target_system/boot . Though they may also re-run lilo or something like that, so it's possibly not what you actually want to use.
MfG, JBG
Signature · 4 lines
Jan-Benedict Glaw [email protected] . +49-172-7608481 _ O _ "Eine Freie Meinung in einem Freien Kopf | Gegen Zensur | Gegen Krieg _ _ O für einen Freien Staat voll Freier Bürger" | im Internet! | im Irak! O O O ret = do_actions((curr | FREE_SPEECH) & ~(NEW_COPYRIGHT_LAW | DRM | TCPA));
On Saturday 29 April 2006 08:08, Jan-Benedict Glaw wrote:
[snip]
Quoted 8 lines
Quoted 7 lines
Fair enough, but I'm more interested in where to specify
the target location of the installed kernel and System.map as I don't always have modules for a generated kernel, but usually (near 100% :-)) have an installable kernel image. For development, I could see it being useful to mount the target system's root in a local directory (like /mnt), then have the kernel build install to a target root of "/mnt".
Quoted 5 lines
Installing the kernel image is quite architecture specific; most architectures use $(INSTALL_PATH), so this could be something like /path/to/target_system/boot . Though they may also re-run lilo or something like that, so it's possibly not what you actually want to use.
I'm fairly sure modern 2.6 kernels do the following with "make install":
1) Try to run ~/bin/installkernel script.
2) Try to run /sbin/installkernel (distributions)
3) Guess an install path and run LILO.
If you hack together an "installkernel" I'm sure you could get it to do what you want. It certainly works here (I have it generate a menu.lst update for grub and copy my images to /boot/vmlinuz-version
and /boot/System.map-version, and run make modules_install).
Signature · 5 lines
Cheers, Alistair. Third year Computer Science undergraduate. 1F2 55 South Clerk Street, Edinburgh, UK.