Skip to contentSkip to conversation

problem booting 2.4.32, unknown symbol

DISCUSSION George Nychis 3 participants 5 messages May 16, 2006 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Hi,

I am trying to boot 2.4.32 with FC3, whenever i try to boot i get the following errors:

insmod: error inserting `/lib/scsi_mod.o': -1 Unknown symbol in module ERROR /bin/insmod excited abnormally!
insmod: error inserting `/lib/sd_mod.o': -1 Unknown symbol in module

I get the same error for libata.o, ata_piix.o, and lvm-mod.o

then i get failed to create /edv/ide/host0/bus0/target0/lun0/disc

So my guess is trying to fix the top most first

Anyone have any ideas?

Thanks!
George

#1 lore raw
Quoted 9 lines · On Tue, 16 May 2006 10:43:42 -0400 George Nychis wrote:

Hi,

I am trying to boot 2.4.32 with FC3, whenever i try to boot i get the following errors:

insmod: error inserting `/lib/scsi_mod.o': -1 Unknown symbol in module ERROR /bin/insmod excited abnormally!
insmod: error inserting `/lib/sd_mod.o': -1 Unknown symbol in module

Quoted 7 lines

I get the same error for libata.o, ata_piix.o, and lvm-mod.o

then i get failed to create /edv/ide/host0/bus0/target0/lun0/disc

So my guess is trying to fix the top most first

Anyone have any ideas?

I don't know the problem, but dmesg should show you/us the actual symbol that is wanted and missing, so please provide that.

---
~Randy

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw
Quoted 22 lines · On Tue, 16 May 2006 10:56:57 -0400 George Nychis wrote:
Quoted 19 lines · Randy.Dunlap
Quoted 16 lines · On Tue, 16 May 2006 10:43:42 -0400 George Nychis wrote:

Hi,

I am trying to boot 2.4.32 with FC3, whenever i try to boot i get the following errors:

insmod: error inserting `/lib/scsi_mod.o': -1 Unknown symbol in module ERROR /bin/insmod excited abnormally!
insmod: error inserting `/lib/sd_mod.o': -1 Unknown symbol in module

I get the same error for libata.o, ata_piix.o, and lvm-mod.o

then i get failed to create /edv/ide/host0/bus0/target0/lun0/disc

So my guess is trying to fix the top most first

Anyone have any ideas?

Quoted 8 lines
Quoted 6 lines

I don't know the problem, but dmesg should show you/us the actual symbol that is wanted and missing, so please provide that.

---
~Randy

If the system doesn't boot, how can i get the dmesg?

aha, my bad, sorry.
I'll have to defer to someone who knows about FC3.

---
~Randy

#4 lore raw
Quoted 28 lines · Randy.Dunlap
Quoted 26 lines · On Tue, 16 May 2006 10:56:57 -0400 George Nychis wrote:
Quoted 24 lines · Randy.Dunlap
Quoted 9 lines · On Tue, 16 May 2006 10:43:42 -0400 George Nychis wrote:

Hi,

I am trying to boot 2.4.32 with FC3, whenever i try to boot i get the following errors:

insmod: error inserting `/lib/scsi_mod.o': -1 Unknown symbol in module ERROR /bin/insmod excited abnormally!
insmod: error inserting `/lib/sd_mod.o': -1 Unknown symbol in module

Quoted 7 lines

I get the same error for libata.o, ata_piix.o, and lvm-mod.o

then i get failed to create /edv/ide/host0/bus0/target0/lun0/disc

So my guess is trying to fix the top most first

Anyone have any ideas?

I don't know the problem, but dmesg should show you/us the actual symbol that is wanted and missing, so please provide that.

---
~Randy

Quoted 8 lines
Quoted 1 line

If the system doesn't boot, how can i get the dmesg?

aha, my bad, sorry.
I'll have to defer to someone who knows about FC3.

---
~Randy

Some more info, my bottom most errors:

ERROR: failed in exec of vgscan
ERROR: failed in exec of vgchange
mount: error 6 mounting ext3
pivotroot: pivot_root(/sysroot,/sysroot/initrd) failed: 2 umount /initrd/proc failed: 2
ERROR: vchange exited abnormally!
mkrootdev: mknod failed: 17
...
...

Kernel panic: No init found.  Try passing init= option to kernel

- George

#5 lore raw
Quoted 51 lines · George Nychis
Quoted 28 lines · Randy.Dunlap
Quoted 26 lines · On Tue, 16 May 2006 10:56:57 -0400 George Nychis wrote:
Quoted 24 lines · Randy.Dunlap
Quoted 9 lines · On Tue, 16 May 2006 10:43:42 -0400 George Nychis wrote:

Hi,

I am trying to boot 2.4.32 with FC3, whenever i try to boot i get the following errors:

insmod: error inserting `/lib/scsi_mod.o': -1 Unknown symbol in module ERROR /bin/insmod excited abnormally!
insmod: error inserting `/lib/sd_mod.o': -1 Unknown symbol in module

Quoted 7 lines

I get the same error for libata.o, ata_piix.o, and lvm-mod.o

then i get failed to create /edv/ide/host0/bus0/target0/lun0/disc

So my guess is trying to fix the top most first

Anyone have any ideas?

I don't know the problem, but dmesg should show you/us the actual symbol that is wanted and missing, so please provide that.

---
~Randy

Quoted 8 lines
Quoted 1 line

If the system doesn't boot, how can i get the dmesg?

aha, my bad, sorry.
I'll have to defer to someone who knows about FC3.

---
~Randy

Some more info, my bottom most errors:

ERROR: failed in exec of vgscan
ERROR: failed in exec of vgchange
mount: error 6 mounting ext3
pivotroot: pivot_root(/sysroot,/sysroot/initrd) failed: 2 umount /initrd/proc failed: 2
ERROR: vchange exited abnormally!
mkrootdev: mknod failed: 17
...
...

Quoted 1 line
Kernel panic: No init found.  Try passing init= option to kernel

Are you really sure this combination is supported at all ? Your distro might be heavily relying on 2.6 extensions not present in 2.4 (lvm2, ...). For instance, I remember that a time ago, some distros installed with the DIRINDEX option enabled on all EXT2/EXT3 filesystems, which could not be mounted by unpatched kernels because this option was not in mainline.

Quoted 1 line

- George

Willy