Skip to contentSkip to conversation

ds.o: init_module: Operation not permitted (no socket drivers loaded)

DISCUSSION George Nychis 1 participant 3 messages May 27, 2006

lore
Share & tools
lore
#0 lore raw

Hey guys,

I have a prism card that I would like to get working with my 2.4.32 kernel. I installed pcmcia-cs and removed pcmcia support from the kernel, i am not sure if this was the right decision, if not please tell me.

So after installing pcmcia_cs, i boot and modprobe pcmcia_core and hostap, then i try to modprobe hostap_cs and i get:

[root@emu-5 hostap-driver-0.4.9]# modprobe hostap_cs /lib/modules/2.4.32/pcmcia/ds.o: init_module: Operation not permitted
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg

So of course I dmesg:
ds: no socket drivers loaded!

I can successfully get the card to work in my 2.6.9 kernel, here is my lsmod... the only thing i see different is the yenta_socket which I am not sure of:
[root@emu-5 ~]# lsmod

Module                  Size  Used by
parport_pc             24705  1
lp                     11565  0
parport                41737  2 parport_pc,lp
autofs4                24005  0
i2c_dev                10433  0
i2c_core               22081  1 i2c_dev
sunrpc                160421  1
hostap_cs              62656  3
hostap                117132  1 hostap_cs
ds                     16965  3 hostap_cs
button                  6481  0
battery                 8517  0
ac                      4805  0
md5                     4033  1
ipv6                  232577  10
yenta_socket           18753  1
pcmcia_core            59913  3 hostap_cs,ds,yenta_socket
uhci_hcd               31449  0
ehci_hcd               31557  0
snd_intel8x0           34829  0
snd_ac97_codec         64401  1 snd_intel8x0
snd_pcm_oss            47609  0
snd_mixer_oss          17217  1 snd_pcm_oss
snd_pcm                97993  2 snd_intel8x0,snd_pcm_oss
snd_timer              29765  1 snd_pcm
snd_page_alloc          9673  2 snd_intel8x0,snd_pcm
gameport                4801  1 snd_intel8x0
snd_mpu401_uart         8769  1 snd_intel8x0
snd_rawmidi            26725  1 snd_mpu401_uart
snd_seq_device          8137  1 snd_rawmidi
snd                    54053  9
snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore               9889  1 snd
tg3                    85445  0
dm_snapshot            17029  0
dm_zero                 2369  0
dm_mirror              23341  2
ext3                  116809  2
jbd                    74969  1 ext3
dm_mod                 54741  6 dm_snapshot,dm_zero,dm_mirror
ata_piix                8389  2
libata                 40005  1 ata_piix
sd_mod                 16961  3
scsi_mod              118417  2 libata,sd_mod

I'd greatly appreciate any help!

Thanks!
George

#1 lore raw
Quoted 69 lines · George Nychis

Hey guys,

I have a prism card that I would like to get working with my 2.4.32 kernel. I installed pcmcia-cs and removed pcmcia support from the kernel, i am not sure if this was the right decision, if not please tell me.

So after installing pcmcia_cs, i boot and modprobe pcmcia_core and hostap, then i try to modprobe hostap_cs and i get:

[root@emu-5 hostap-driver-0.4.9]# modprobe hostap_cs /lib/modules/2.4.32/pcmcia/ds.o: init_module: Operation not permitted
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg

So of course I dmesg:
ds: no socket drivers loaded!

I can successfully get the card to work in my 2.6.9 kernel, here is my lsmod... the only thing i see different is the yenta_socket which I am not sure of:
[root@emu-5 ~]# lsmod

Module                  Size  Used by
parport_pc             24705  1
lp                     11565  0
parport                41737  2 parport_pc,lp
autofs4                24005  0
i2c_dev                10433  0
i2c_core               22081  1 i2c_dev
sunrpc                160421  1
hostap_cs              62656  3
hostap                117132  1 hostap_cs
ds                     16965  3 hostap_cs
button                  6481  0
battery                 8517  0
ac                      4805  0
md5                     4033  1
ipv6                  232577  10
yenta_socket           18753  1
pcmcia_core            59913  3 hostap_cs,ds,yenta_socket
uhci_hcd               31449  0
ehci_hcd               31557  0
snd_intel8x0           34829  0
snd_ac97_codec         64401  1 snd_intel8x0
snd_pcm_oss            47609  0
snd_mixer_oss          17217  1 snd_pcm_oss
snd_pcm                97993  2 snd_intel8x0,snd_pcm_oss
snd_timer              29765  1 snd_pcm
snd_page_alloc          9673  2 snd_intel8x0,snd_pcm
gameport                4801  1 snd_intel8x0
snd_mpu401_uart         8769  1 snd_intel8x0
snd_rawmidi            26725  1 snd_mpu401_uart
snd_seq_device          8137  1 snd_rawmidi
snd                    54053  9
snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore               9889  1 snd
tg3                    85445  0
dm_snapshot            17029  0
dm_zero                 2369  0
dm_mirror              23341  2
ext3                  116809  2
jbd                    74969  1 ext3
dm_mod                 54741  6 dm_snapshot,dm_zero,dm_mirror
ata_piix                8389  2
libata                 40005  1 ata_piix
sd_mod                 16961  3
scsi_mod              118417  2 libata,sd_mod
Quoted 5 lines

I'd greatly appreciate any help!

Thanks!
George

Alright i'm going to respond to my own post real quick... I built pcmcia support into the kernel instead of using pcmcia-cs. I now get the power light on the card light up. So then I modprobe hostap and hostap_cs

I see this in dmesg:
hostap_crypt: registered algorithm 'NULL'
hostap_cs: 0.4.9 - 2006-05-06 (Jouni Malinen <[email protected]>)

It also seems to be recognizing a card:
[root@emu-5 pcmcia]# cardctl info
PRODID_1="INTERSIL"
PRODID_2="HFA384x/IEEE"
PRODID_3="Version 01.02"
PRODID_4=""
MANFID=0156,0002
FUNCID=6

However i see no wireless interfaces:
[root@emu-5 pcmcia]# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

[root@emu-5 pcmcia]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:11:43:43:D0:11
inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:705 errors:0 dropped:0 overruns:0 frame:0 TX packets:454 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000
RX bytes:65062 (63.5 KiB) TX bytes:81096 (79.1 KiB) Interrupt:11

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0
RX bytes:560 (560.0 b) TX bytes:560 (560.0 b)

Any ideas?

Thanks!
George

#2 lore raw

My final response to myself, so no one wastes time trying to help me, I got it working by building the regular pcmcia support as modules with the 2.4.32 kernel, then using the latest hostap drivers, and rebooting.

Quoted 123 lines · George Nychis
Quoted 69 lines · George Nychis

Hey guys,

I have a prism card that I would like to get working with my 2.4.32 kernel. I installed pcmcia-cs and removed pcmcia support from the kernel, i am not sure if this was the right decision, if not please tell me.

So after installing pcmcia_cs, i boot and modprobe pcmcia_core and hostap, then i try to modprobe hostap_cs and i get:

[root@emu-5 hostap-driver-0.4.9]# modprobe hostap_cs /lib/modules/2.4.32/pcmcia/ds.o: init_module: Operation not permitted
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg

So of course I dmesg:
ds: no socket drivers loaded!

I can successfully get the card to work in my 2.6.9 kernel, here is my lsmod... the only thing i see different is the yenta_socket which I am not sure of:
[root@emu-5 ~]# lsmod

Module                  Size  Used by
parport_pc             24705  1
lp                     11565  0
parport                41737  2 parport_pc,lp
autofs4                24005  0
i2c_dev                10433  0
i2c_core               22081  1 i2c_dev
sunrpc                160421  1
hostap_cs              62656  3
hostap                117132  1 hostap_cs
ds                     16965  3 hostap_cs
button                  6481  0
battery                 8517  0
ac                      4805  0
md5                     4033  1
ipv6                  232577  10
yenta_socket           18753  1
pcmcia_core            59913  3 hostap_cs,ds,yenta_socket
uhci_hcd               31449  0
ehci_hcd               31557  0
snd_intel8x0           34829  0
snd_ac97_codec         64401  1 snd_intel8x0
snd_pcm_oss            47609  0
snd_mixer_oss          17217  1 snd_pcm_oss
snd_pcm                97993  2 snd_intel8x0,snd_pcm_oss
snd_timer              29765  1 snd_pcm
snd_page_alloc          9673  2 snd_intel8x0,snd_pcm
gameport                4801  1 snd_intel8x0
snd_mpu401_uart         8769  1 snd_intel8x0
snd_rawmidi            26725  1 snd_mpu401_uart
snd_seq_device          8137  1 snd_rawmidi
snd                    54053  9
snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore               9889  1 snd
tg3                    85445  0
dm_snapshot            17029  0
dm_zero                 2369  0
dm_mirror              23341  2
ext3                  116809  2
jbd                    74969  1 ext3
dm_mod                 54741  6 dm_snapshot,dm_zero,dm_mirror
ata_piix                8389  2
libata                 40005  1 ata_piix
sd_mod                 16961  3
scsi_mod              118417  2 libata,sd_mod
Quoted 5 lines

I'd greatly appreciate any help!

Thanks!
George

Alright i'm going to respond to my own post real quick... I built pcmcia support into the kernel instead of using pcmcia-cs. I now get the power light on the card light up. So then I modprobe hostap and hostap_cs

I see this in dmesg:
hostap_crypt: registered algorithm 'NULL'
hostap_cs: 0.4.9 - 2006-05-06 (Jouni Malinen <[email protected]>)

It also seems to be recognizing a card:
[root@emu-5 pcmcia]# cardctl info
PRODID_1="INTERSIL"
PRODID_2="HFA384x/IEEE"
PRODID_3="Version 01.02"
PRODID_4=""
MANFID=0156,0002
FUNCID=6

However i see no wireless interfaces:
[root@emu-5 pcmcia]# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

[root@emu-5 pcmcia]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:11:43:43:D0:11
inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:705 errors:0 dropped:0 overruns:0 frame:0 TX packets:454 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000
RX bytes:65062 (63.5 KiB) TX bytes:81096 (79.1 KiB) Interrupt:11

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0
RX bytes:560 (560.0 b) TX bytes:560 (560.0 b)

Any ideas?

Thanks!
George