Skip to contentSkip to conversation

s3c2410fb: Fix resume

PATCH In review Antonino A. Daplas 1 participant 1 message May 28, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 4/5 s3c2410fb: Fix resume

From: Arnaud Patard <[email protected]>

regs.lcdcon1 was not updated on suspend. The result was a garbaged display on resume. This bug was first noticed by Christer Weinigel. This patch is a modified version of the one he sent to me.

---

 drivers/video/s3c2410fb.c |   17 +++++++++++------
 1 files changed, 11 insertions(+), 6 deletions(-)
drivers/video/s3c2410fb.c +11 -6
index 9451932..fbc4118 100644
@@ -641,6 +641,7 @@ static int __init s3c2410fb_probe(struct
 	int ret;
 	int irq;
 	int i;
+	u32 lcdcon1;
 
 	mach_info = pdev->dev.platform_data;
 	if (mach_info == NULL) {
@@ -672,6 +673,11 @@ static int __init s3c2410fb_probe(struct
 
 	memcpy(&info->regs, &mach_info->regs, sizeof(info->regs));
 
+	/* Stop the video and unset ENVID if set */
+	info->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID;
+	lcdcon1 = readl(S3C2410_LCDCON1);
+	writel(lcdcon1 & ~S3C2410_LCDCON1_ENVID, S3C2410_LCDCON1);
+
 	info->mach_info		    = pdev->dev.platform_data;
 
 	fbinfo->fix.type	    = FB_TYPE_PACKED_PIXELS;
@@ -794,15 +800,14 @@ dealloc_fb:
  * shutdown the lcd controller
 */
 
-static void s3c2410fb_stop_lcd(void)
+static void s3c2410fb_stop_lcd(struct s3c2410fb_info *fbi)
 {
 	unsigned long flags;
-	unsigned long tmp;
 
 	local_irq_save(flags);
 
-	tmp = readl(S3C2410_LCDCON1);
-	writel(tmp & ~S3C2410_LCDCON1_ENVID, S3C2410_LCDCON1);
+	fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID;
+	writel(fbi->regs.lcdcon1, S3C2410_LCDCON1);
 
 	local_irq_restore(flags);
 }
@@ -816,7 +821,7 @@ static int s3c2410fb_remove(struct platf
 	struct s3c2410fb_info *info = fbinfo->par;
 	int irq;
 
-	s3c2410fb_stop_lcd();
+	s3c2410fb_stop_lcd(info);
 	msleep(1);
 
 	s3c2410fb_unmap_video_memory(info);
@@ -844,7 +849,7 @@ static int s3c2410fb_suspend(struct plat
 	struct fb_info	   *fbinfo = platform_get_drvdata(dev);
 	struct s3c2410fb_info *info = fbinfo->par;
 
-	s3c2410fb_stop_lcd();
+	s3c2410fb_stop_lcd(info);
 
 	/* sleep before disabling the clock, we need to ensure
 	 * the LCD DMA engine is not going to get back on the bus

-------------------------------------------------------
All the advantages of Linux Managed Hosting--Without the Cost and Risk! Fully trained technicians. The highest number of Red Hat certifications in the hosting industry. Fanatical Support. Click to learn more
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=107521&bid=248729&dat=121642