Linux and Wireless USB Adaptor
I have an Airlink Wireless USB 2.0 adaptor. Does it work with Linux? If so - what do I have to do to make it work?
Thanks in advance.
Hello Marc,
I would try ndiswrapper (http://ndiswrapper.sf.net), because it is the easiest way to run a USB Wireless LAN adapter. The ndiswrapper is a nice driver, which allows to run Windows NDIS Driver under Linux. Therefore, you can use the delivered Windows Driver to run your adapter under Linux. I use for all my wireless adapter this kind of solution. But maybe it exists a better way to run your adapter under Linux (separate linux driver or so).
If you need help to install ndiswrapper you should take a look on the project website.
Regards,
Jens
Quoted 10 lines · Marc Perkel
I have an Airlink Wireless USB 2.0 adaptor. Does it work with Linux? If so - what do I have to do to make it work?
Thanks in advance.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 5 lines · Jens G?tze
Hello Marc,
I would try ndiswrapper (http://ndiswrapper.sf.net), because it is the easiest way to run a USB Wireless LAN adapter. The ndiswrapper is a nice driver, which allows to run Windows NDIS Driver under Linux. Therefore,
For some very obscure definition of 'nice'...
Avoid ndiswrapper, it is broken by design.
Pavel
Signature · 1 line
Thanks for all the (sleeping) penguins.
Hello Pavel,
'nice' is everything what works fine as a solution. Therefore, I would say that the ndiswrapper is nice, if the case is that no Linux Driver is available. And if you have no time or the knowledge (programming or chip set information) to implement a driver by your own, then is the ndiswrapper a good solution.
Yes, the design is not the best, but it works or not?! ;-)
Regards,
Jens
Quoted 11 lines · Pavel Machek
Quoted 5 lines · Jens G?tze
Hello Marc,
I would try ndiswrapper (http://ndiswrapper.sf.net), because it is the easiest way to run a USB Wireless LAN adapter. The ndiswrapper is a nice driver, which allows to run Windows NDIS Driver under Linux. Therefore,
For some very obscure definition of 'nice'...
Avoid ndiswrapper, it is broken by design.
Pavel
Quoted 4 lines · Pavel Machek
Quoted 2 lines · Jens G?tze
Hello Marc,
Quoted 10 lines
Quoted 4 lines
I would try ndiswrapper (http://ndiswrapper.sf.net), because it is the easiest way to run a USB Wireless LAN adapter. The ndiswrapper is a nice driver, which allows to run Windows NDIS Driver under Linux. Therefore,
For some very obscure definition of 'nice'...
Avoid ndiswrapper, it is broken by design.
Some people might define "nice" as better than nothing.
Quoted 10 lines · Marc Perkel
Quoted 7 lines · Pavel Machek
Quoted 3 lines · Jens G?tze
I would try ndiswrapper (http://ndiswrapper.sf.net), because it is the easiest way to run a USB Wireless LAN adapter. The ndiswrapper is a nice driver, which allows to run Windows NDIS Driver under Linux. Therefore,
For some very obscure definition of 'nice'...
Avoid ndiswrapper, it is broken by design.
Some people might define "nice" as better than nothing.
Hmm. So an atomic bomb is a nice solution to political problems, too?
But back to ndiswrapper: you cannot build anything you want to distribute based on it. You won't get any help debugging problems with it from regular kernel hackers. You won't even get help for non-related problems if that stuff has ever been loaded into the current kernel image from any kernel hacker.
So it's pretty far away from something you may consider for productive use, isn't it?
MfG, JBG
Signature · 4 lines
Jan-Benedict Glaw [email protected] . +49-172-7608481 _ O _ "Eine Freie Meinung in einem Freien Kopf | Gegen Zensur | Gegen Krieg _ _ O für einen Freien Staat voll Freier Bürger" | im Internet! | im Irak! O O O ret = do_actions((curr | FREE_SPEECH) & ~(NEW_COPYRIGHT_LAW | DRM | TCPA));
Quoted 2 lines · On Sat, 27 May 2006 23:12:20 -0700 Marc Perkel <[email protected]> wrote:
I have an Airlink Wireless USB 2.0 adaptor. Does it work with Linux? If so - what do I have to do to make it work?
Please see:
http://linux-wless.passys.nl/query_part.php?brandname=Airlink+Tech
--
Ciao
Stefano
Hi Marc,
Quoted 1 line · Marc Perkel
I have an Airlink Wireless USB 2.0 adaptor. Does it work with Linux? If so - what do I have to do to make it work?
Is it an AWLL3025 or an AWLL3026?
If so, it is based on the ZD1211 chip. You can download a community maintained version of the vendor driver here: http://zd1211.ath.cx/
Or you can try the rewritten version which we aim to get included in 2.6.18 or 2.6.19: http://zd1211.ath.cx/wiki/DriverRewrite
Daniel
Hi,
I had the same problem as Marc. I have AWLL3026. I followed the installation instructions in the web site http://zd1211.ath.cx/ but the network is not working yet. I am connected wirelessly to a router that connects me to the internet and the internet is not working. That's how I knew that the network is not working.
Any suggestions are appreciated.
Thanks,
Mohamed Rabie
--
View this message in context: http://www.nabble.com/Linux-and-Wireless-USB-Adaptor-t1693753.html#a4699234
Sent from the linux-kernel forum at Nabble.com.